Merge pull request #626 from arduino/sync/karlsoderby/make-your-uno

Make Your UNO Kit

Author: karlsoderby

content/hardware/08.kits/family.md

@@ -0,0 +1,5 @@
+---
+title: Kits
+description: Pre-packaged kits with components, creative projects & dedicated content.
+
+---

content/hardware/08.kits/image-480.png

@@ -0,0 +1,3 @@
+---
+title: Maker
+---

content/hardware/08.kits/image.png

@@ -0,0 +1,10 @@
+software:
+  - arduino-ide
+  - arduino-cli
+  - web-editor
+hardware:
+  shields:
+  - 4-relays-shield
+  - motor-shield-rev3
+  carriers: ~
+  boards: ~

content/hardware/08.kits/maker/category.md

@@ -0,0 +1,35 @@
+<FeatureDescription>
+
+The Make Your UNO Kit includes all components for you to make your own UNO, such as the ATmega328P chip, a USB-C module, header rows and more. This kit also features a step-by-step 3D interactive model that will guide you through the soldering steps.
+
+</FeatureDescription>
+
+
+<FeatureList>
+<Feature title="Beginner Friendly" image="led">
+
+This kit includes instructions for you who have never soldered before! But don't worry if you're an expert. You can also cut right to the chase!
+
+</Feature>
+
+<Feature title="The Classic UNO" image="uno-form-factor">
+
+Includes all electronic components needed to build the popular Arduino UNO board from scratch!
+
+</Feature>
+
+<Feature title="Synthesiser Shield" image="mcu">
+
+This kit also includes components to build a Synthesiser Shield for producing funky tunes!
+
+</Feature>
+
+<Feature title="3D Interactive Guide" image="configurability">
+
+A 3D Interactive Guide is included in this kit, that allows you to follow soldering instructions in detail.
+
+</Feature>
+
+
+
+</FeatureList>

content/hardware/08.kits/maker/make-your-uno-kit/compatibility.yml

@@ -0,0 +1,7 @@
+---
+title: Make Your UNO Kit
+url_shop: https://store.arduino.cc/make-your-uno
+url_guide: https://makeyouruno.arduino.cc/
+---
+
+Build your own Arduino UNO from scratch using raw electronic components! The Make Your UNO Kit includes all electronic components needed to build the classic UNO board, a long with 3D instructions, video & text content to support your journey.

content/hardware/08.kits/maker/make-your-uno-kit/datasheet/assets/audioComponentsView.png

@@ -0,0 +1 @@
+Here you will find the technical specifications for the Arduino® Make Your UNO Kit.

content/hardware/08.kits/maker/make-your-uno-kit/datasheet/assets/boardOutline.svg

@@ -0,0 +1,52 @@
+Kit:
+  Name: Arduino® Make Your UNO Kit
+  SKU: AKX00037
+PCB:
+  Board PCB Sheet: 1x
+  Shield PCB Sheet: 1x
+Integrated Circuits:
+  ATmega328P: 1x
+  LM386 (amplifier): 1x
+  USB-C Module: 1x
+LEDs:
+  Green: 1x
+  Yellow: 4x
+Resistors: 
+  10Ω: 1x
+  1kΩ: 7x
+  10kΩ: 2x
+  100kΩ: 1x
+  1MΩ: 2x
+Capacitors:
+  Yellow 22pF: 3x 
+  Yellow 47pF: 1x
+  Electrolytic Black 47μF: 3x
+  Electrolytic Black 220μF: 1x
+  Blue 100nF: 8x
+Other Electronics:
+  Speaker 8Ω 1W: 1x
+  Crystal 16mHz, 20pF: 1x 
+  Diode: 1x
+  Potentiometer 10kΩ: 6x
+  Potentiometer Knob: 6x
+  Pushbutton: 1x
+  LDO (3.3V): 1x
+  LDO (5V): 1x
+  Power Jack: 1x
+Connectors: 
+  UNO I/O Connector: 2x
+  ICPS Connector: 1x
+  ATmega328P Socket: 1x
+  1x10 Pin Header: 1x
+  1x8 Pin Header: 2x
+  1x6 Pin Header: 1x
+Mechanical Components:
+  M3 Spacer 12mm: 5x
+  M3 Screw 6mm: 11x
+  M3 Screw 12mm: 2x
+  M3 Bolt: 5x
+
+
+
+
+