[win] I cannot upload to the Arduino Zero (Programming Port)

[kittaakos]

Bug Report

The verification phase is OK, the upload fails.

Error: unable to open CMSIS-DAP device 0x3eb:0x2157
Error: No Valid JTAG Interface Configured.
Upload error: Error: 2 UNKNOWN: uploading error: exit status 4294967295

Current behavior

Steps to reproduce after wiping all previous state from C:\Users\kittaakos\AppData\Local\Arduino15:

C:\Users\kittaakos\Desktop>arduino-cli.exe version
arduino-cli.exe Version: 0.9.0 Commit: e4d02b4

C:\Users\kittaakos\Desktop>arduino-cli.exe core update-index
Downloading missing tool builtin:ctags@5.8-arduino11...
builtin:ctags@5.8-arduino11 downloaded
Installing builtin:ctags@5.8-arduino11...
builtin:ctags@5.8-arduino11 installed
Downloading missing tool builtin:serial-discovery@1.0.0...
builtin:serial-discovery@1.0.0 downloaded
Installing builtin:serial-discovery@1.0.0...
builtin:serial-discovery@1.0.0 installed
Updating index: library_index.json downloaded
Updating index: package_index.json downloaded

C:\Users\kittaakos\Desktop>arduino-cli.exe core list


C:\Users\kittaakos\Desktop>arduino-cli.exe core search
ID                   Version   Name
Arrow:samd           2.1.0     Arrow Boards
Intel:arc32          2.0.4     Intel Curie Boards
Intel:i586           1.6.7+1.0 Intel i586 Boards
Intel:i686           1.6.7+1.0 Intel i686 Boards
Microsoft:win10      1.1.2     Windows 10 Iot Core
arduino:avr          1.8.2     Arduino AVR Boards
arduino:mbed         1.1.4     Arduino nRF528x Boards (Mbed OS)
arduino:megaavr      1.8.6     Arduino megaAVR Boards
arduino:nrf52        1.0.2     Arduino nRF52 Boards
arduino:sam          1.6.12    Arduino SAM Boards (32-bits ARM Cortex-M3)
arduino:samd         1.8.6     Arduino SAMD Boards (32-bits ARM Cortex-M0+)
arduino:samd_beta    1.6.25    Arduino SAMD Beta Boards (32-bits ARM Cortex-M0+)
atmel-avr-xminis:avr 0.6.0     Atmel AVR Xplained-minis
emoro:avr            3.2.2     EMORO 2560
industruino:samd     1.0.1     Industruino SAMD Boards (32-bits ARM Cortex-M0+)
littleBits:avr       1.0.0     littleBits Arduino AVR Modules


C:\Users\kittaakos\Desktop>arduino-cli.exe core install arduino:samd
Downloading packages...
arduino:arm-none-eabi-gcc@7-2017q4 downloaded
arduino:bossac@1.7.0-arduino3 downloaded
arduino:openocd@0.10.0-arduino7 downloaded
arduino:CMSIS@4.5.0 downloaded
arduino:CMSIS-Atmel@1.2.0 downloaded
arduino:arduinoOTA@1.2.1 downloaded
arduino:samd@1.8.6 downloaded
Installing arduino:arm-none-eabi-gcc@7-2017q4...
arduino:arm-none-eabi-gcc@7-2017q4 installed
Installing arduino:bossac@1.7.0-arduino3...
arduino:bossac@1.7.0-arduino3 installed
Installing arduino:openocd@0.10.0-arduino7...
arduino:openocd@0.10.0-arduino7 installed
Installing arduino:CMSIS@4.5.0...
arduino:CMSIS@4.5.0 installed
Installing arduino:CMSIS-Atmel@1.2.0...
arduino:CMSIS-Atmel@1.2.0 installed
Installing arduino:arduinoOTA@1.2.1...
arduino:arduinoOTA@1.2.1 installed
Installing arduino:samd@1.8.6...
arduino:samd@1.8.6 installed

C:\Users\kittaakos\Desktop>arduino-cli.exe core list
ID           Installed Latest Name
arduino:samd 1.8.6     1.8.6  Arduino SAMD Boards (32-bits ARM Cortex-M0+)


C:\Users\kittaakos\Desktop>arduino-cli.exe board list
Port Type              Board Name                      FQBN                           Core
COM3 Serial Port (USB) Unknown
COM4 Serial Port (USB) Unknown
COM5 Serial Port (USB) Unknown
COM6 Serial Port (USB) Unknown
COM7 Serial Port (USB) Arduino Zero (Programming Port) arduino:samd:arduino_zero_edbg arduino:samd


C:\Users\kittaakos\Desktop>arduino-cli.exe board list --format json
[
  {
    "address": "COM3",
    "protocol": "serial",
    "protocol_label": "Serial Port (USB)"
  },
  {
    "address": "COM4",
    "protocol": "serial",
    "protocol_label": "Serial Port (USB)"
  },
  {
    "address": "COM5",
    "protocol": "serial",
    "protocol_label": "Serial Port (USB)"
  },
  {
    "address": "COM6",
    "protocol": "serial",
    "protocol_label": "Serial Port (USB)"
  },
  {
    "address": "COM7",
    "protocol": "serial",
    "protocol_label": "Serial Port (USB)",
    "boards": [
      {
        "name": "Arduino Zero (Programming Port)",
        "FQBN": "arduino:samd:arduino_zero_edbg"
      }
    ]
  }
]
C:\Users\kittaakos\Desktop>arduino-cli.exe sketch new UploadToZeroOnWin10
Sketch created in: C:\Users\kittaakos\Desktop\UploadToZeroOnWin10

C:\Users\kittaakos\Desktop>arduino-cli.exe compile --fqbn arduino:samd:arduino_zero_edbg UploadToZeroOnWin10
Sketch uses 11592 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2936 bytes of dynamic memory.

C:\Users\kittaakos\Desktop>arduino-cli.exe upload -p COM7 --fqbn arduino:samd:arduino_zero_edbg UploadToZeroOnWin10
Open On-Chip Debugger 0.10.0+dev-gf0767a31 (2018-06-11-13:36)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
debug_level: 0
none separate
adapter speed: 400 kHz
cortex_m reset_config sysresetreq
Error: unable to open CMSIS-DAP device 0x3eb:0x2157
Error: No Valid JTAG Interface Configured.
Error during Upload: uploading error: exit status 4294967295

C:\Users\kittaakos\Desktop>

Expected behavior

Environment

• CLI version (output of arduino-cli version): arduino-cli.exe Version: 0.9.0 Commit: e4d02b4
• OS and platform: Windows 10 Pro 1909 18363.720

Additional context

[kittaakos]

I thought this might be a permission issue, and started CMD.EXE as an administrator; I had the same error.

Related?

• No Valid JTAG Error ArduinoCore-samd#36
• [Windows] Move user directory away from Documents? #566

[kittaakos]

I have downloaded and installed the driver for Black Magic Probe from here, checked the wires again 😊, re-ran the upload, and now it works now 🎉

C:\Users\kittaakos\Desktop>arduino-cli.exe upload -p COM7 --fqbn arduino:samd:arduino_zero_edbg UploadToZeroOnWin10
Open On-Chip Debugger 0.10.0+dev-gf0767a31 (2018-06-11-13:36)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
debug_level: 0
none separate
adapter speed: 400 kHz
cortex_m reset_config sysresetreq
target halted due to debug-request, current mode: Thread
xPSR: 0x61000000 pc: 0x0000060c msp: 0x20007ffc
** Programming Started **
auto erase enabled
wrote 11776 bytes from file UploadToZeroOnWin10/UploadToZeroOnWin10.arduino.samd.arduino_zero_edbg.bin in 1.318470s (8.722 KiB/s)
** Programming Finished **
** Verify Started **
verified 11592 bytes in 0.978771s (11.566 KiB/s)
** Verified OK **
** Resetting Target **
shutdown command invoked