# config/docbook.m4
-# PGAC_PROG_JADE
-# --------------
-AC_DEFUN([PGAC_PROG_JADE],
-[AC_CHECK_PROGS([JADE], [openjade jade])])
-
-
# PGAC_PROG_NSGMLS
# ----------------
AC_DEFUN([PGAC_PROG_NSGMLS],
have_docbook=$pgac_cv_check_docbook
AC_SUBST([have_docbook])
])# PGAC_CHECK_DOCBOOK
-
-
-# PGAC_PATH_DOCBOOK_STYLESHEETS
-# -----------------------------
-AC_DEFUN([PGAC_PATH_DOCBOOK_STYLESHEETS],
-[AC_ARG_VAR(DOCBOOKSTYLE, [location of DocBook stylesheets])dnl
-AC_MSG_CHECKING([for DocBook stylesheets])
-AC_CACHE_VAL([pgac_cv_path_stylesheets],
-[if test -n "$DOCBOOKSTYLE"; then
- pgac_cv_path_stylesheets=$DOCBOOKSTYLE
-else
- for pgac_prefix in /usr /usr/local /opt /sw; do
- for pgac_infix in share lib; do
- for pgac_postfix in \
- sgml/stylesheets/nwalsh-modular \
- sgml/stylesheets/docbook \
- sgml/stylesheets/dsssl/docbook \
- sgml/docbook-dsssl \
- sgml/docbook/dsssl/modular \
- sgml/docbook/stylesheet/dsssl/modular \
- sgml/docbook/dsssl-stylesheets \
- sgml/dsssl/docbook-dsssl-nwalsh
- do
- pgac_candidate=$pgac_prefix/$pgac_infix/$pgac_postfix
- if test -r "$pgac_candidate/html/docbook.dsl" \
- && test -r "$pgac_candidate/print/docbook.dsl"
- then
- pgac_cv_path_stylesheets=$pgac_candidate
- break 3
- fi
- done
- done
- done
-fi])
-DOCBOOKSTYLE=$pgac_cv_path_stylesheets
-AC_SUBST([DOCBOOKSTYLE])
-if test -n "$DOCBOOKSTYLE"; then
- AC_MSG_RESULT([$DOCBOOKSTYLE])
-else
- AC_MSG_RESULT(no)
-fi])# PGAC_PATH_DOCBOOK_STYLESHEETS
-
-
-# PGAC_PATH_COLLATEINDEX
-# ----------------------
-# Some DocBook installations provide collateindex.pl in $DOCBOOKSTYLE/bin,
-# but it's not necessarily marked executable, so we can't use AC_PATH_PROG
-# to check for it there. Other installations just put it in the PATH.
-AC_DEFUN([PGAC_PATH_COLLATEINDEX],
-[AC_REQUIRE([PGAC_PATH_DOCBOOK_STYLESHEETS])dnl
-if test -n "$DOCBOOKSTYLE" -a -r "$DOCBOOKSTYLE/bin/collateindex.pl"; then
- COLLATEINDEX="$DOCBOOKSTYLE/bin/collateindex.pl"
- AC_SUBST([COLLATEINDEX])
-else
- AC_PATH_PROG(COLLATEINDEX, collateindex.pl)
-fi])# PGAC_PATH_COLLATEINDEX
vpath_build
PG_VERSION_NUM
PROVE
+FOP
OSX
XSLTPROC
XMLLINT
DBTOEPUB
-COLLATEINDEX
-DOCBOOKSTYLE
have_docbook
-JADE
NSGMLS
TCL_SHLIB_LD_LIBS
TCL_SHARED_BUILD
ICU_CFLAGS
ICU_LIBS
LDFLAGS_EX
-LDFLAGS_SL
-DOCBOOKSTYLE'
+LDFLAGS_SL'
# Initialize some variables set by options.
ICU_LIBS linker flags for ICU, overriding pkg-config
LDFLAGS_EX extra linker flags for linking executables only
LDFLAGS_SL extra linker flags for linking shared libraries only
- DOCBOOKSTYLE
- location of DocBook stylesheets
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
test -n "$NSGMLS" && break
done
-for ac_prog in openjade jade
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_JADE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$JADE"; then
- ac_cv_prog_JADE="$JADE" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_JADE="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-JADE=$ac_cv_prog_JADE
-if test -n "$JADE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JADE" >&5
-$as_echo "$JADE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$JADE" && break
-done
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DocBook V4.2" >&5
$as_echo_n "checking for DocBook V4.2... " >&6; }
have_docbook=$pgac_cv_check_docbook
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DocBook stylesheets" >&5
-$as_echo_n "checking for DocBook stylesheets... " >&6; }
-if ${pgac_cv_path_stylesheets+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$DOCBOOKSTYLE"; then
- pgac_cv_path_stylesheets=$DOCBOOKSTYLE
-else
- for pgac_prefix in /usr /usr/local /opt /sw; do
- for pgac_infix in share lib; do
- for pgac_postfix in \
- sgml/stylesheets/nwalsh-modular \
- sgml/stylesheets/docbook \
- sgml/stylesheets/dsssl/docbook \
- sgml/docbook-dsssl \
- sgml/docbook/dsssl/modular \
- sgml/docbook/stylesheet/dsssl/modular \
- sgml/docbook/dsssl-stylesheets \
- sgml/dsssl/docbook-dsssl-nwalsh
- do
- pgac_candidate=$pgac_prefix/$pgac_infix/$pgac_postfix
- if test -r "$pgac_candidate/html/docbook.dsl" \
- && test -r "$pgac_candidate/print/docbook.dsl"
- then
- pgac_cv_path_stylesheets=$pgac_candidate
- break 3
- fi
- done
- done
- done
-fi
-fi
-
-DOCBOOKSTYLE=$pgac_cv_path_stylesheets
-
-if test -n "$DOCBOOKSTYLE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOCBOOKSTYLE" >&5
-$as_echo "$DOCBOOKSTYLE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-if test -n "$DOCBOOKSTYLE" -a -r "$DOCBOOKSTYLE/bin/collateindex.pl"; then
- COLLATEINDEX="$DOCBOOKSTYLE/bin/collateindex.pl"
-
-else
- # Extract the first word of "collateindex.pl", so it can be a program name with args.
-set dummy collateindex.pl; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_COLLATEINDEX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $COLLATEINDEX in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_COLLATEINDEX="$COLLATEINDEX" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_COLLATEINDEX="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-COLLATEINDEX=$ac_cv_path_COLLATEINDEX
-if test -n "$COLLATEINDEX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $COLLATEINDEX" >&5
-$as_echo "$COLLATEINDEX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
for ac_prog in dbtoepub
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
test -n "$OSX" && break
done
+for ac_prog in fop
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_FOP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$FOP"; then
+ ac_cv_prog_FOP="$FOP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_FOP="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+FOP=$ac_cv_prog_FOP
+if test -n "$FOP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FOP" >&5
+$as_echo "$FOP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$FOP" && break
+done
+
#
# Check for test tools
# Check for DocBook and tools
#
PGAC_PROG_NSGMLS
-PGAC_PROG_JADE
PGAC_CHECK_DOCBOOK(4.2)
-PGAC_PATH_DOCBOOK_STYLESHEETS
-PGAC_PATH_COLLATEINDEX
AC_CHECK_PROGS(DBTOEPUB, dbtoepub)
AC_CHECK_PROGS(XMLLINT, xmllint)
AC_CHECK_PROGS(XSLTPROC, xsltproc)
AC_CHECK_PROGS(OSX, [osx sgml2xml sx])
+AC_CHECK_PROGS(FOP, fop)
#
# Check for test tools
/features-unsupported.sgml
/errcodes-table.sgml
/version.sgml
-/bookindex.sgml
-/HTML.index
# Assorted byproducts from building the above
/postgres.xml
/INSTALL.html
/INSTALL.xml
-/postgres-US.aux
-/postgres-US.log
-/postgres-US.out
-/postgres-A4.aux
-/postgres-A4.log
-/postgres-A4.out
DBTOEPUB = $(missing) dbtoepub
endif
-ifndef JADE
-JADE = $(missing) jade
+ifndef FOP
+FOP = $(missing) fop
endif
+
SGMLINCLUDE = -D . -D $(srcdir)
ifndef NSGMLS
override XSLTPROCFLAGS += --stringparam pg.version '$(VERSION)'
-GENERATED_SGML = bookindex.sgml version.sgml \
+GENERATED_SGML = version.sgml \
features-supported.sgml features-unsupported.sgml errcodes-table.sgml
ALLSGML := $(wildcard $(srcdir)/*.sgml $(srcdir)/ref/*.sgml) $(GENERATED_SGML)
-# Sometimes we don't want this one.
-ALMOSTALLSGML := $(filter-out %bookindex.sgml,$(ALLSGML))
-
-ifdef DOCBOOKSTYLE
-CATALOG = -c $(DOCBOOKSTYLE)/catalog
-endif
-
# Enable some extra warnings
# -wfully-tagged needed to throw a warning on missing tags
# for older tool chains, 2007-08-31
# noisy to turn on by default, unfortunately.
override SPFLAGS += -wall -wno-unused-param -wno-empty -wfully-tagged
+
##
## Man pages
##
##
-## HTML
+## common files
##
-.PHONY: draft
-
-JADE.html.call = $(JADE) $(JADEFLAGS) $(SPFLAGS) $(SGMLINCLUDE) $(CATALOG) -d stylesheet.dsl -t sgml -i output-html
-ifeq ($(STYLE),website)
-JADE.html.call += -V website-stylesheet
-endif
-
-# The draft target creates HTML output in draft mode, without index (for faster build).
-draft: postgres.sgml $(ALMOSTALLSGML) stylesheet.dsl
- $(MKDIR_P) html
- $(JADE.html.call) -V draft-mode $<
- cp $(srcdir)/stylesheet.css html/
-
-oldhtml: oldhtml-stamp
-
-oldhtml-stamp: postgres.sgml $(ALLSGML) stylesheet.dsl
- $(MAKE) check-tabs
- $(MKDIR_P) html
- $(JADE.html.call) -i include-index $<
- cp $(srcdir)/stylesheet.css html/
- touch $@
-
-# single-page HTML
-postgres.html: postgres.sgml $(ALLSGML) stylesheet.dsl
- $(JADE.html.call) -V nochunks -V rootchunk -V '(define %root-filename% #f)' -V '(define use-output-dir #f)' -i include-index $<
-
-# single-page text
-postgres.txt: postgres.html
- $(LYNX) -force_html -dump -nolist $< > $@
-
-HTML.index: postgres.sgml $(ALMOSTALLSGML) stylesheet.dsl
- @$(MKDIR_P) html
- $(JADE.html.call) -V html-index $<
-
-bookindex.sgml: HTML.index
-ifdef COLLATEINDEX
- LC_ALL=C $(PERL) $(COLLATEINDEX) -f -g -i 'bookindex' -o $@ $<
-else
- @$(missing) collateindex.pl $< $@
-endif
-
# Technically, this should depend on Makefile.global, but then
# version.sgml would need to be rebuilt after every configure run,
# even in distribution tarballs. So this is cheating a bit, but it
errcodes-table.sgml: $(top_srcdir)/src/backend/utils/errcodes.txt generate-errcodes-table.pl
$(PERL) $(srcdir)/generate-errcodes-table.pl $< > $@
-##
-## Print
-##
-
-
-# RTF to allow minor editing for hardcopy
-%.rtf: %.sgml $(ALLSGML)
- $(JADE) $(JADEFLAGS) $(SGMLINCLUDE) $(CATALOG) -d stylesheet.dsl -t rtf -V rtf-backend -i output-print -i include-index postgres.sgml
-
-# TeX
-# Regular TeX and pdfTeX have slightly differing requirements, so we
-# need to distinguish the path we're taking.
-
-JADE.tex.call = $(JADE) $(JADEFLAGS) $(SGMLINCLUDE) $(CATALOG) -d $(srcdir)/stylesheet.dsl -t tex -V tex-backend -i output-print -i include-index
-
-%-A4.tex-ps: %.sgml $(ALLSGML)
- $(JADE.tex.call) -V texdvi-output -V '%paper-type%'=A4 -o $@ $<
-
-%-US.tex-ps: %.sgml $(ALLSGML)
- $(JADE.tex.call) -V texdvi-output -V '%paper-type%'=USletter -o $@ $<
-
-%-A4.tex-pdf: %.sgml $(ALLSGML)
- $(JADE.tex.call) -V texpdf-output -V '%paper-type%'=A4 -o $@ $<
-
-%-US.tex-pdf: %.sgml $(ALLSGML)
- $(JADE.tex.call) -V texpdf-output -V '%paper-type%'=USletter -o $@ $<
-
-%.dvi: %.tex-ps
- @rm -f $*.aux $*.log
-# multiple runs are necessary to create proper intra-document links
- jadetex $<
- jadetex $<
- jadetex $<
-
-# PostScript from TeX
-postgres.ps:
- $(error Invalid target; use postgres-A4.ps or postgres-US.ps as targets)
-
-%.ps: %.dvi
- dvips -o $@ $<
-
-postgres.pdf:
- $(error Invalid target; use postgres-A4.pdf or postgres-US.pdf as targets)
-
-%.pdf: %.tex-pdf
- @rm -f $*.aux $*.log $*.out
-# multiple runs are necessary to create proper intra-document links
- pdfjadetex $<
- pdfjadetex $<
- pdfjadetex $<
-
-# Cancel built-in suffix rules, interfering with PS building
-.SUFFIXES:
-
-
-# This generates an XML version of the flow-object tree. It's useful
-# for debugging DSSSL code, and possibly to interface to some other
-# tools that can make use of this.
-%.fot: %.sgml $(ALLSGML)
- $(JADE) $(JADEFLAGS) $(SGMLINCLUDE) $(CATALOG) -d stylesheet.dsl -t fot -i output-print -i include-index -o $@ $<
-
##
## Generation of some text files.
$(XSLTPROC) $(XSLTPROCFLAGS) $(XSLTPROC_HTML_FLAGS) $^ >$@
INSTALL.xml: standalone-install.sgml installation.sgml version.sgml
- $(OSX) -D. -x lower $(filter-out version.sgml,$^) >$@.tmp
+ $(OSX) $(SGMLINCLUDE) -x lower $(filter-out version.sgml,$^) >$@.tmp
$(call mangle-xml,chapter)
##
-## XSLT processing
+## SGML->XML conversion
##
# For obscure reasons, GNU make 3.81 complains about circular dependencies
# if we try to do "make all" in a VPATH build without the explicit
# $(srcdir) on the postgres.sgml dependency in this rule. GNU make bug?
-postgres.xml: $(srcdir)/postgres.sgml $(ALMOSTALLSGML)
- $(OSX) -D. -x lower -i include-xslt-index $< >$@.tmp
+postgres.xml: $(srcdir)/postgres.sgml $(ALLSGML)
+ $(OSX) $(SGMLINCLUDE) -x lower $< >$@.tmp
$(call mangle-xml,book)
define mangle-xml
rm $@.tmp
endef
+
+##
+## HTML
+##
+
ifeq ($(STYLE),website)
XSLTPROC_HTML_FLAGS += --param website.stylesheet 1
endif
$(XMLLINT) --noout --valid postgres.xml
$(XSLTPROC) $(XSLTPROCFLAGS) $^
+# single-page HTML
+postgres.html: stylesheet-html-nochunk.xsl postgres.xml
+ $(XMLLINT) --noout --valid postgres.xml
+ $(XSLTPROC) $(XSLTPROCFLAGS) $(XSLTPROC_HTML_FLAGS) -o $@ $^
+
+# single-page text
+postgres.txt: postgres.html
+ $(LYNX) -force_html -dump -nolist $< > $@
+
+
+##
+## Print
+##
+
+postgres.pdf:
+ $(error Invalid target; use postgres-A4.pdf or postgres-US.pdf as targets)
+
%-A4.fo: stylesheet-fo.xsl %.xml
$(XMLLINT) --noout --valid $*.xml
$(XSLTPROC) $(XSLTPROCFLAGS) --stringparam paper.type A4 -o $@ $^
$(XMLLINT) --noout --valid $*.xml
$(XSLTPROC) $(XSLTPROCFLAGS) --stringparam paper.type USletter -o $@ $^
-FOP = fop
+%.pdf: %.fo
+ $(FOP) -fo $< -pdf $@
-.SECONDARY: postgres-A4.fo postgres-US.fo
-%-fop.pdf: %.fo
- $(FOP) -fo $< -pdf $@
+##
+## EPUB
+##
epub: postgres.epub
postgres.epub: postgres.xml
##
# Quick syntax check without style processing
-check: postgres.sgml $(ALMOSTALLSGML) check-tabs
+check: postgres.sgml $(ALLSGML) check-tabs
$(NSGMLS) $(SPFLAGS) $(SGMLINCLUDE) -s $<
# keeping the dependencies satisfied.
.SECONDARY: postgres.xml $(GENERATED_SGML) HTML.index
.SECONDARY: INSTALL.html INSTALL.xml
-.SECONDARY: %-A4.tex-ps %-US.tex-ps %-A4.tex-pdf %-US.tex-pdf
+.SECONDARY: postgres-A4.fo postgres-US.fo
clean:
# text --- these are shipped, but not in this directory
# single-page output
rm -f postgres.html postgres.txt
# print
- rm -f *.rtf *.tex-ps *.tex-pdf *.dvi *.aux *.log *.ps *.pdf *.out *.fot
-# index
- rm -f HTML.index $(GENERATED_SGML)
-# XSLT
- rm -f postgres.xml *.tmp htmlhelp.hhp toc.hhc index.hhk *.fo
+ rm -f *.fo *.pdf
+# generated SGML files
+ rm -f $(GENERATED_SGML)
+# SGML->XML conversion
+ rm -f postgres.xml *.tmp
+# HTML Help
+ rm -f htmlhelp.hhp toc.hhc index.hhk
# EPUB
rm -f postgres.epub
# Texinfo
</listitem>
<listitem>
<para>
- PDF or PostScript, for printing
+ PDF, for printing
</para>
</listitem>
<listitem>
<para>
<acronym>HTML</acronym> documentation and man pages are part of a
- standard distribution and are installed by default. PDF and
- PostScript format documentation is available separately for
+ standard distribution and are installed by default. PDF
+ format documentation is available separately for
download.
</para>
used, but technically they are not interchangeable.
</para>
+ <note>
+ <para>
+ The PostgreSQL documentation is currently being transitioned from DocBook
+ SGML and DSSSL style sheets to DocBook XML and XSLT style sheets. Be
+ careful to look at the instructions relating to the PostgreSQL version you
+ are dealing with, as the procedures and required tools will change.
+ </para>
+ </note>
+
<para>
<productname>DocBook</productname> allows an author to specify the
structure and content of a technical document without worrying
<term><ulink url="http://www.oasis-open.org/docbook/">DocBook DTD</ulink></term>
<listitem>
<para>
- This is the definition of DocBook itself. We currently use
- version 4.2; you cannot use later or earlier versions. You
- need the <acronym>SGML</acronym> variant of the DocBook DTD,
- but to build man pages you also need the <acronym>XML</acronym>
- variant of the same version.
+ This is the definition of DocBook itself. We currently use version
+ 4.2; you cannot use later or earlier versions. You need
+ the <acronym>SGML</acronym> and the <acronym>XML</acronym> variant of
+ the DocBook DTD of the same version. These will usually be in separate
+ packages.
</para>
</listitem>
</varlistentry>
<term><ulink url="http://www.oasis-open.org/cover/ISOEnts.zip">ISO 8879 character entities</ulink></term>
<listitem>
<para>
- These are required by DocBook but are distributed separately
+ These are required by DocBook SGML but are distributed separately
because they are maintained by ISO.
</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><ulink url="http://wiki.docbook.org/DocBookDssslStylesheetDocs">DocBook DSSSL Stylesheets</ulink></term>
+ <term><ulink url="http://wiki.docbook.org/DocBookXslStylesheets">DocBook XSL Stylesheets</ulink></term>
<listitem>
<para>
These contain the processing instructions for converting the
DocBook sources to other formats, such as
<acronym>HTML</acronym>.
</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><ulink url="http://wiki.docbook.org/DocBookXslStylesheets">DocBook XSL Stylesheets</ulink></term>
- <listitem>
- <para>
- This is another stylesheet for converting DocBook to other
- formats. We currently use this to produce man pages and
- optionally HTMLHelp. You can also use this toolchain to
- produce HTML or PDF output, but official PostgreSQL releases
- use the DSSSL stylesheets for that.
- </para>
<para>
- The minimum required version is currently 1.74.0.
+ The minimum required version is currently 1.77.0, but it is recommended
+ to use the latest available version for best results.
</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><ulink url="http://openjade.sourceforge.net">OpenJade</ulink></term>
+ <term><ulink url="http://openjade.sourceforge.net">OpenSP</ulink></term>
<listitem>
<para>
- This is the base package of <acronym>SGML</acronym> processing.
- It contains an <acronym>SGML</acronym> parser, a
- <acronym>DSSSL</acronym> processor (that is, a program to
- convert <acronym>SGML</acronym> to other formats using
- <acronym>DSSSL</acronym> stylesheets), as well as a number of
- related tools. <productname>Jade</productname> is now being
- maintained by the OpenJade group, no longer by James Clark.
+ This is the base package of <acronym>SGML</acronym> processing. Note
+ that we no longer need OpenJade, the <acronym>DSSSL</acronym>
+ processor, only the OpenSP package for converting SGML to XML.
</para>
</listitem>
</varlistentry>
<term><ulink url="http://xmlsoft.org/XSLT/">Libxslt</ulink> for <command>xsltproc</command></term>
<listitem>
<para>
- This is the processing tool to use with the XSLT stylesheets
- (like <command>jade</command> is the processing tool for DSSSL
- stylesheets).
+ <command>xsltproc</command> is an XSLT processor, that is, a program to
+ convert XML to other formats using XSLT stylesheets.
</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><ulink url="http://jadetex.sourceforge.net">JadeTeX</ulink></term>
+ <term><ulink url="https://xmlgraphics.apache.org/fop/">FOP</ulink></term>
<listitem>
<para>
- If you want to, you can also install
- <productname>JadeTeX</productname> to use
- <productname>TeX</productname> as a formatting backend for
- <productname>Jade</productname>.
- <application>JadeTeX</application> can create PostScript or
- <acronym>PDF</acronym> files (the latter with bookmarks).
- </para>
-
- <para>
- However, the output from <application>JadeTeX</application> is
- inferior to what you get from the <acronym>RTF</acronym>
- backend. Particular problem areas are tables and various
- artifacts of vertical and horizontal spacing. Also, there is
- no opportunity to manually polish the results.
+ This is a program for converting, among other things, XML to PDF.
</para>
</listitem>
</varlistentry>
here.
</para>
+ <para>
+ You can get away with not installing DocBook XML and the DocBook XSLT
+ stylesheets locally, because the required files will be downloaded from the
+ Internet and cached locally. This may in fact be the preferred solution if
+ your operating system packages provide only an old version of especially
+ the stylesheets or if no packages are available at all. See
+ the <option>--nonet</option> option for <command>xmllint</command>
+ and <command>xsltproc</command> for more information.
+ </para>
+
<sect2>
<title>Installation on Fedora, RHEL, and Derivatives</title>
<para>
To install the required packages, use:
<programlisting>
-yum install docbook-dtds docbook-style-dsssl docbook-style-xsl libxslt openjade
+yum install docbook-dtds docbook-style-xsl fop libxslt opensp
</programlisting>
</para>
</sect2>
<para><filename>textproc/libxslt</filename></para>
</listitem>
<listitem>
- <para><filename>textproc/openjade</filename></para>
+ <para><filename>textproc/fop</filename></para>
+ </listitem>
+ <listitem>
+ <para><filename>textproc/opensp</filename></para>
</listitem>
</itemizedlist>
</para>
- <para>
- A number of things from <filename>/usr/ports/print</filename>
- (<filename>tex</filename>, <filename>jadetex</filename>) might
- also be of interest.
- </para>
-
<para>
To install the required packages with <command>pkg</command>, use:
<programlisting>
-pkg install docbook-sgml docbook-xml docbook-xsl dsssl-docbook-modular libxslt openjade
+pkg install docbook-sgml docbook-xml docbook-xsl fop libxslt opensp
</programlisting>
</para>
available for <productname>Debian GNU/Linux</productname>.
To install, simply use:
<programlisting>
-apt-get install docbook docbook-dsssl docbook-xsl libxml2-utils openjade1.3 opensp xsltproc
+apt-get install docbook docbook-xml docbook-xsl fop libxml2-utils opensp xsltproc
</programlisting>
</para>
</sect2>
<para>
If you use MacPorts, the following will get you set up:
<programlisting>
-sudo port install docbook-dsssl docbook-sgml-4.2 docbook-xml-4.2 docbook-xsl libxslt openjade opensp
+sudo port install docbook-sgml-4.2 docbook-xml-4.2 docbook-xsl fop libxslt opensp
</programlisting>
</para>
</sect2>
</para>
<sect3>
- <title>Installing OpenJade</title>
+ <title>Installing OpenSP</title>
- <procedure>
- <step>
- <para>
- The installation of OpenJade offers a GNU-style
- <literal>./configure; make; make install</literal> build
- process. Details can be found in the OpenJade source
- distribution. In a nutshell:
+ <para>
+ The installation of OpenSP offers a GNU-style
+ <literal>./configure; make; make install</literal> build process.
+ Details can be found in the OpenSP source distribution. In a nutshell:
<synopsis>
-./configure --enable-default-catalog=/usr/local/share/sgml/catalog
+./configure --enable-default-catalog=/usr/local/etc/sgml/catalog
make
make install
</synopsis>
- Be sure to remember where you put the <quote>default
- catalog</quote>; you will need it below. You can also leave
- it off, but then you will have to set the environment variable
- <envar>SGML_CATALOG_FILES</envar> to point to the file
- whenever you use <application>jade</application> later on.
- (This method is also an option if OpenJade is already
- installed and you want to install the rest of the toolchain
- locally.)
- </para>
-
- <note>
- <para>
- Some users have reported encountering a segmentation fault using
- OpenJade 1.4devel to build the PDFs, with a message like:
-<screen>
-openjade:./stylesheet.dsl:664:2:E: flow object not accepted by port; only display flow objects accepted
-make: *** [postgres-A4.tex-pdf] Segmentation fault
-</screen>
- Downgrading to OpenJade 1.3 should get rid of this error.
- </para>
- </note>
-
- </step>
-
- <step id="doc-openjade-install">
- <para>
- Additionally, you should install the files
- <filename>dsssl.dtd</filename>, <filename>fot.dtd</filename>,
- <filename>style-sheet.dtd</filename>, and
- <filename>catalog</filename> from the
- <filename>dsssl</filename> directory somewhere, perhaps into
- <filename>/usr/local/share/sgml/dsssl</filename>. It's
- probably easiest to copy the entire directory:
-<synopsis>
-cp -R dsssl /usr/local/share/sgml
-</synopsis>
- </para>
- </step>
-
- <step>
- <para>
- Finally, create the file
- <filename>/usr/local/share/sgml/catalog</filename> and add
- this line to it:
-<programlisting>
-CATALOG "dsssl/catalog"
-</programlisting>
- (This is a relative path reference to the file installed in
- <xref linkend="doc-openjade-install">. Be sure to adjust it
- if you chose your installation layout differently.)
- </para>
- </step>
- </procedure>
+ Be sure to remember where you put the <quote>default catalog</quote>; you
+ will need it below. You can also leave it off, but then you will have to
+ set the environment variable <envar>SGML_CATALOG_FILES</envar> to point
+ to the file whenever you use any programs from OpenSP later on. (This
+ method is also an option if OpenSP is already installed and you want to
+ install the rest of the toolchain locally.)
+ </para>
</sect3>
<sect3>
</step>
</procedure>
</sect3>
-
- <sect3>
- <title>Installing the DocBook <acronym>DSSSL</acronym> Style Sheets</title>
-
- <para>
- To install the style sheets, unzip and untar the distribution and
- move it to a suitable place, for example
- <filename>/usr/local/share/sgml</filename>. (The archive will
- automatically create a subdirectory.)
-<screen>
-<prompt>$</prompt> <userinput>gunzip docbook-dsssl-1.<replaceable>xx</>.tar.gz</userinput>
-<prompt>$</prompt> <userinput>tar -C /usr/local/share/sgml -xf docbook-dsssl-1.<replaceable>xx</>.tar</userinput>
-</screen>
- </para>
-
- <para>
- The usual catalog entry in
- <filename>/usr/local/share/sgml/catalog</filename> can also be
- made:
-<programlisting>
-CATALOG "docbook-dsssl-1.<replaceable>xx</>/catalog"
-</programlisting>
- Because stylesheets change rather often, and it's sometimes
- beneficial to try out alternative versions,
- <productname>PostgreSQL</productname> doesn't use this catalog
- entry. See <xref linkend="docguide-toolsets-configure"> for
- information about how to select the stylesheets instead.
- </para>
- </sect3>
-
- <sect3>
- <title>Installing <productname>JadeTeX</productname></title>
-
- <para>
- To install and use <productname>JadeTeX</productname>, you will
- need a working installation of <productname>TeX</productname> and
- <productname>LaTeX2e</productname>, including the supported
- <productname>tools</productname> and
- <productname>graphics</productname> packages,
- <productname>Babel</productname>,
- <productname><acronym>AMS</acronym> fonts</productname> and
- <productname>AMS-LaTeX</productname>, the
- <productname><acronym>PSNFSS</acronym></productname> extension
- and companion kit of <quote>the 35 fonts</quote>, the
- <productname>dvips</productname> program for generating
- <productname>PostScript</productname>, the macro packages
- <productname>fancyhdr</productname>,
- <productname>hyperref</productname>,
- <productname>minitoc</productname>,
- <productname>url</productname> and
- <productname>ot2enc</productname>. All of these can be found on
- your friendly neighborhood <ulink url="http://www.ctan.org">
- <acronym>CTAN</acronym> site</ulink>.
- The installation of the <application>TeX</application> base
- system is far beyond the scope of this introduction. Binary
- packages should be available for any system that can run
- <application>TeX</application>.
- </para>
-
- <para>
- Before you can use <application>JadeTeX</application> with the
- <productname>PostgreSQL</productname> documentation sources, you
- will need to increase the size of
- <application>TeX</application>'s internal data structures.
- Details on this can be found in the <application>JadeTeX</application>
- installation instructions.
- </para>
-
- <para>
- Once that is finished you can install <application>JadeTeX</application>:
-<screen>
-<prompt>$</prompt> <userinput>gunzip jadetex-<replaceable>xxx</replaceable>.tar.gz</userinput>
-<prompt>$</prompt> <userinput>tar xf jadetex-<replaceable>xxx</replaceable>.tar</userinput>
-<prompt>$</prompt> <userinput>cd jadetex</userinput>
-<prompt>$</prompt> <userinput>make install</userinput>
-<prompt>$</prompt> <userinput>mktexlsr</userinput>
-</screen>
- The last two need to be done as <systemitem>root</systemitem>.
- </para>
-
- </sect3>
-
</sect2>
<sect2 id="docguide-toolsets-configure">
<screen>
<computeroutput>
checking for onsgmls... onsgmls
-checking for openjade... openjade
checking for DocBook V4.2... yes
-checking for DocBook stylesheets... /usr/share/sgml/docbook/stylesheet/dsssl/modular
-checking for collateindex.pl... /usr/bin/collateindex.pl
+checking for dbtoepub... dbtoepub
+checking for xmllint... xmllint
checking for xsltproc... xsltproc
checking for osx... osx
+checking for fop... fop
</computeroutput>
</screen>
If neither <filename>onsgmls</filename> nor
<filename>nsgmls</filename> were found then some of the following tests
- will be skipped. <filename>nsgmls</filename> is part of the Jade
- package. You can pass the environment variables
- <envar>JADE</envar> and <envar>NSGMLS</envar> to configure to point
+ will be skipped. <filename>nsgmls</filename> is part of the OpenSP
+ package. You can pass the environment variable
+ <envar>NSGMLS</envar> to configure to point
to the programs if they are not found automatically. If
<quote>DocBook V4.2</quote> was not found then you did not install
- the DocBook DTD kit in a place where Jade can find it, or you have
+ the DocBook DTD kit in a place where OpenSP can find it, or you have
not set up the catalog files correctly. See the installation hints
- above. The DocBook stylesheets are looked for in a number of
- relatively standard places, but if you have them some other place
- then you should set the environment variable
- <envar>DOCBOOKSTYLE</envar> to the location and rerun
- <filename>configure</filename> afterwards.
+ above.
</para>
</sect2>
default simple style use:
<screen>
<prompt>doc/src/sgml$ </prompt><userinput>make STYLE=website html</userinput>
-</screen>
- </para>
-
- <para>
- To create a proper index, the build might process several identical
- stages. If you do not care about the index, and just want to
- proof-read the output, use <literal>draft</>:
-<screen>
-<prompt>doc/src/sgml$ </prompt><userinput>make draft</userinput>
-</screen>
- </para>
-
- <para>
- To build the documentation as a single HTML page, use:
-<screen>
-<prompt>doc/src/sgml$ </prompt><userinput>make postgres.html</userinput>
</screen>
</para>
</sect2>
pages. The man pages are also distributed as a tar archive,
similar to the <acronym>HTML</acronym> version. To create the man
pages, use the commands:
-<programlisting>
-cd doc/src/sgml
-make man
-</programlisting>
+<screen>
+<prompt>doc/src/sgml$ </prompt><userinput>make man</userinput>
+</screen>
</para>
</sect2>
<sect2>
- <title>Print Output via <application>JadeTeX</application></title>
+ <title>PDF</title>
<para>
- If you want to use <application>JadeTex</application> to produce a
- printable rendition of the documentation, you can use one of the
- following commands:
+ To produce a PDF rendition of the documentation
+ using <productname>FOP</productname>, you can use one of the following
+ commands, depending on the preferred paper format:
<itemizedlist>
<listitem>
<para>
- To generate PostScript via <acronym>DVI</acronym> in A4 format:
-<screen>
-<prompt>doc/src/sgml$ </prompt><userinput>make postgres-A4.ps</userinput>
-</screen>
- In U.S. letter format:
+ For A4 format:
<screen>
-<prompt>doc/src/sgml$ </prompt><userinput>make postgres-US.ps</userinput>
+<prompt>doc/src/sgml$ </prompt><userinput>make postgres-A4.pdf</userinput>
</screen>
</para>
</listitem>
<listitem>
<para>
- To make a <acronym>PDF</acronym>:
-<screen>
-<prompt>doc/src/sgml$ </prompt><userinput>make postgres-A4.pdf</userinput>
-</screen>
- or:
+ For U.S. letter format:
<screen>
<prompt>doc/src/sgml$ </prompt><userinput>make postgres-US.pdf</userinput>
</screen>
- (Of course you can also make a <acronym>PDF</acronym> version
- from the PostScript, but if you generate <acronym>PDF</acronym>
- directly, it will have hyperlinks and other enhanced features.)
</para>
</listitem>
</itemizedlist>
</para>
<para>
- When using JadeTeX to build the PostgreSQL documentation, you will
- probably need to increase some of TeX's internal parameters. These
- can be set in the file <filename>texmf.cnf</filename>. The following
- settings worked at the time of this writing:
+ Because the PostgreSQL documentation is fairly
+ big, <productname>FOP</productname> will require a significant amount of
+ memory. Because of that, on some systems, the build will fail with a
+ memory-related error message. This can usually be fixed by configuring
+ Java heap settings in the configuration
+ file <filename>~/.foprc</filename>, for example:
<programlisting>
-hash_extra.jadetex = 200000
-hash_extra.pdfjadetex = 200000
-pool_size.jadetex = 2000000
-pool_size.pdfjadetex = 2000000
-string_vacancies.jadetex = 150000
-string_vacancies.pdfjadetex = 150000
-max_strings.jadetex = 300000
-max_strings.pdfjadetex = 300000
-save_size.jadetex = 15000
-save_size.pdfjadetex = 15000
+# FOP binary distribution
+FOP_OPTS='-Xmx1000m'
+# Debian
+JAVA_ARGS='-Xmx1000m'
+# Red Hat
+ADDITIONAL_FLAGS='-Xmx1000m'
</programlisting>
+ There is a minimum amount of memory that is required, and to some extent
+ more memory appears to make things a bit faster. On systems with very
+ little memory (less than 1 GB), the build will either be very slow due to
+ swapping or will not work at all.
</para>
- </sect2>
-
- <sect2>
- <title>Overflow Text</title>
-
<para>
- Occasionally text is too wide for the printed margins, and in
- extreme cases, too wide for the printed page, e.g. non-wrapped
- text, wide tables. Overly wide text generates <quote>Overfull
- hbox</quote> messages in the TeX log output file, e.g.
- <filename>postgres-US.log</> or <filename>postgres-A4.log</>.
- There are 72 points in an inch so anything reported as over 72
- points too wide will probably not fit on the printed page (assuming
- one inch margins). To find the <acronym>SGML</acronym> text
- causing the overflow, find the first page number mentioned above
- the overflow message, e.g. <literal>[50 ###]</> (page 50), and
- look at the page after that (e.g. page 51) in the <acronym>PDF</acronym>
- file to see the overflow text and adjust the <acronym>SGML</acronym>
- accordingly.
+ Other XSL-FO processors can also be used manually, but the automated build
+ process only supports FOP.
</para>
</sect2>
- <sect2>
- <title>Print Output via <acronym>RTF</acronym></title>
-
- <para>
- You can also create a printable version of the <productname>PostgreSQL</productname>
- documentation by converting it to <acronym>RTF</acronym> and
- applying minor formatting corrections using an office suite.
- Depending on the capabilities of the particular office suite, you
- can then convert the documentation to PostScript of
- <acronym>PDF</acronym>. The procedure below illustrates this
- process using <productname>Applixware</productname>.
- </para>
-
- <note>
- <para>
- It appears that current versions of the <productname>PostgreSQL</productname> documentation
- trigger some bug in or exceed the size limit of OpenJade. If the
- build process of the <acronym>RTF</acronym> version hangs for a
- long time and the output file still has size 0, then you might have
- hit that problem. (But keep in mind that a normal build takes 5
- to 10 minutes, so don't abort too soon.)
- </para>
- </note>
-
- <procedure>
- <title><productname>Applixware</productname> <acronym>RTF</acronym> Cleanup</title>
-
- <para>
- <application>OpenJade</application> omits specifying a default
- style for body text. In the past, this undiagnosed problem led to
- a long process of table of contents generation. However, with
- great help from the <productname>Applixware</productname> folks
- the symptom was diagnosed and a workaround is available.
- </para>
-
- <step performance="required">
- <para>
- Generate the <acronym>RTF</acronym> version by typing:
-<screen>
-<prompt>doc/src/sgml$ </prompt><userinput>make postgres.rtf</userinput>
-</screen>
- </para>
- </step>
-
- <step performance="required">
- <para>
- Repair the RTF file to correctly specify all styles, in
- particular the default style. If the document contains
- <sgmltag>refentry</sgmltag> sections, one must also replace
- formatting hints which tie a preceding paragraph to the current
- paragraph, and instead tie the current paragraph to the
- following one. A utility, <command>fixrtf</command>, is
- available in <filename>doc/src/sgml</filename> to accomplish
- these repairs:
-<screen>
-<prompt>doc/src/sgml$ </prompt><userinput>./fixrtf --refentry postgres.rtf</userinput>
-</screen>
- </para>
-
- <para>
- The script adds <literal>{\s0 Normal;}</literal> as the zeroth
- style in the document. According to
- <productname>Applixware</productname>, the RTF standard would
- prohibit adding an implicit zeroth style, though Microsoft Word
- happens to handle this case. For repairing
- <sgmltag>refentry</sgmltag> sections, the script replaces
- <literal>\keepn</literal> tags with <literal>\keep</literal>.
- </para>
- </step>
-
- <step performance="required">
- <para>
- Open a new document in <productname>Applixware Words</productname> and
- then import the <acronym>RTF</acronym> file.
- </para>
- </step>
-
- <step performance="required">
- <para>
- Generate a new table of contents (ToC) using
- <productname>Applixware</productname>.
- </para>
-
- <substeps>
- <step>
- <para>
- Select the existing ToC lines, from the beginning of the first
- character on the first line to the last character of the last
- line.
- </para>
- </step>
-
- <step>
- <para>
- Build a new ToC using
- <menuchoice><guimenu>Tools</guimenu><guisubmenu>Book
- Building</guisubmenu><guimenuitem>Create Table of
- Contents</guimenuitem></menuchoice>. Select the first three
- levels of headers for inclusion in the ToC. This will replace
- the existing lines imported in the RTF with a native
- <productname>Applixware</productname> ToC.
- </para>
- </step>
-
- <step>
- <para>
- Adjust the ToC formatting by using
- <menuchoice><guimenu>Format</guimenu><guimenuitem>Style</guimenuitem></menuchoice>,
- selecting each of the three ToC styles, and adjusting the
- indents for <literal>First</literal> and
- <literal>Left</literal>. Use the following values:
-
- <informaltable>
- <tgroup cols="3">
- <thead>
- <row>
- <entry>Style</entry>
- <entry>First Indent (inches)</entry>
- <entry>Left Indent (inches)</entry>
- </row>
- </thead>
-
- <tbody>
- <row>
- <entry><literal>TOC-Heading 1</literal></entry>
- <entry><literal>0.4</literal></entry>
- <entry><literal>0.4</literal></entry>
- </row>
-
- <row>
- <entry><literal>TOC-Heading 2</literal></entry>
- <entry><literal>0.8</literal></entry>
- <entry><literal>0.8</literal></entry>
- </row>
-
- <row>
- <entry><literal>TOC-Heading 3</literal></entry>
- <entry><literal>1.2</literal></entry>
- <entry><literal>1.2</literal></entry>
- </row>
- </tbody>
- </tgroup>
- </informaltable>
- </para>
- </step>
- </substeps>
- </step>
-
- <step performance="required">
- <para>
- Work through the document to:
-
- <itemizedlist>
- <listitem>
- <para>
- Adjust page breaks.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Adjust table column widths.
- </para>
- </listitem>
- </itemizedlist>
- </para>
- </step>
-
- <step performance="required">
- <para>
- Replace the right-justified page numbers in the Examples and
- Figures portions of the ToC with correct values. This only takes
- a few minutes.
- </para>
- </step>
-
- <step performance="optional">
- <para>
- Delete the index section from the document if it is empty.
- </para>
- </step>
-
- <step performance="required">
- <para>
- Regenerate and adjust the table of contents.
- </para>
-
- <substeps>
- <step>
- <para>
- Select the ToC field.
- </para>
- </step>
-
- <step>
- <para>
- Select <menuchoice><guimenu>Tools</guimenu><guisubmenu>Book
- Building</guisubmenu><guimenuitem>Create Table of
- Contents</guimenuitem></menuchoice>.
- </para>
- </step>
-
- <step>
- <para>
- Unbind the ToC by selecting
- <menuchoice><guimenu>Tools</guimenu><guisubmenu>Field
- Editing</guisubmenu><guimenuitem>Unprotect</guimenuitem></menuchoice>.
- </para>
- </step>
-
- <step>
- <para>
- Delete the first line in the ToC, which is an entry for the
- ToC itself.
- </para>
- </step>
- </substeps>
- </step>
-
- <step performance="required">
- <para>
- Save the document as native <productname>Applixware
- Words</productname> format to allow easier last minute editing
- later.
- </para>
- </step>
-
- <step performance="required">
- <para>
- <quote>Print</quote> the document
- to a file in PostScript format.
- </para>
- </step>
- </procedure>
- </sect2>
-
<sect2>
<title>Plain Text Files</title>
<!-- back matter -->
<!ENTITY biblio SYSTEM "biblio.sgml">
-<!ENTITY bookindex SYSTEM "bookindex.sgml">
<!--
Some parts of the documentation are also source for some plain-text
-->
<!ENTITY % standalone-ignore "INCLUDE">
<!ENTITY % standalone-include "IGNORE">
-
-<!--
- By default, no index is included. Use -i include-index on the command line
- to include it.
- -->
-<!ENTITY % include-index "IGNORE">
-
-<!--
- Create empty index element for processing by XSLT stylesheet.
- -->
-<!ENTITY % include-xslt-index "IGNORE">
+++ /dev/null
-#!/bin/sh
-# fixrtf
-
-# doc/src/sgml/fixrtf
-
-# Repair (slightly) damaged RTF generated by jade
-# Applixware wants the s0 stylesheet defined, whereas
-# M$Word does not care about it.
-# (c) 2001, Thomas Lockhart, PostgreSQL Inc.
-
-flist=""
-RPAT=""
-for i in $@ ; do
- case "$i" in
- -r|--refentry)
- RPAT='-e s/\\\keepn/\\\keep/g'
- ;;
- -?|--help)
- echo "$0 [--refentry] <rtf file> ..."
- exit 0
- ;;
- -*)
- echo "Command $i not recognized"
- $0 --help
- exit 1
- ;;
- *)
- flist="$flist $i"
- esac
-done
-
-if [ "$flist" = "" ] ; then
- flist=*.rtf
-fi
-
-for f in $flist ; do
- echo -n "Repairing '$f' ..."
- if [ -r $f ] ; then
- (sed -e 's/{\\stylesheet{\\s1/{\\stylesheet{\\s0 Normal 0;}{\\s1/g' $RPAT $f > $f.new \
- && mv -f $f.new $f \
- && echo " done") || echo " failed"
- else
- echo " file not found"
- fi
-done
-exit
</para></listitem>
</varlistentry>
- <varlistentry>
- <term>DocBook DSSSL 1.79</term>
- <listitem><para>
- Download from
- <ulink url="http://sourceforge.net/projects/docbook/files/docbook-dsssl/1.79/docbook-dsssl-1.79.zip/download"></>
- and uncompress in the subdirectory
- <filename>docbook-dsssl-1.79</filename>.
- </para></listitem>
- </varlistentry>
-
<varlistentry>
<term>ISO character entities</term>
<listitem><para>
+++ /dev/null
-% doc/src/sgml/jadetex.cfg
-%
-% This file redefines \FlowObjectSetup and some related macros to greatly
-% reduce the number of control sequence names created, and also to avoid
-% creation of many useless hyperlink anchors (bookmarks) in PDF files.
-%
-% The original coding of \FlowObjectSetup defined a control sequence x@LABEL
-% for pretty nearly every flow object in the file, whether that object was
-% cross-referenced or not. Worse yet, it created a hyperlink anchor for
-% every such object, which not only bloated the output PDF with useless
-% anchors but consumed an additional control sequence name per anchor.
-% This results in overrunning TeX's limited-size string pool.
-%
-% To fix, extend \PageLabel's already-existing mechanism whereby a p@LABEL
-% control sequence is filled in only for labels that are referenced by at
-% least one \Pageref call. We now also fill in p@LABEL for labels that are
-% referenced by a \Link. Then, we can drop x@LABEL entirely, and use p@LABEL
-% to control emission of both a hyperlink anchor and a page-number label.
-% Now, both of those things are emitted for all and only the flow objects
-% that have either a hyperlink reference or a page-number reference.
-% We consume about one control sequence name per flow object plus one per
-% referenced object, which is a lot better than three per flow object.
-%
-% (With a more invasive patch, we could track the need for an anchor and a
-% page-number label separately, but that would probably require two control
-% sequences for every flow object. Besides, many objects that have one kind
-% of reference will have the other one too; that's certainly true for objects
-% referenced in either the TOC or the index, for example.)
-%
-%
-% In addition to checking p@LABEL not x@LABEL, this version of \FlowObjectSetup
-% is fixed to clear \Label and \Element whether or not it emits an anchor
-% and page label. Failure to do that seems to explain some pre-existing bugs
-% in which certain SGML constructs weren't correctly cross-referenced.
-%
-\def\FlowObjectSetup#1{%
-\ifDoFOBSet
- \ifLabelElements
- \ifx\Label\@empty\let\Label\Element\fi
- \fi
- \ifx\Label\@empty\else
- \expandafter\ifx\csname p@\Label\endcsname\relax
- \else
- \bgroup
- \ifNestedLink
- \else
- \hyper@anchorstart{\Label}\hyper@anchorend
- \PageLabel{\Label}%
- \fi
- \egroup
- \fi
- \let\Label\@empty
- \let\Element\@empty
- \fi
-\fi
-}
-%
-% Adjust \PageLabel so that the p@NAME control sequence acquires a correct
-% value immediately; this seems to be needed to avoid scenarios wherein
-% additional TeX runs are needed to reach a stable state of the .aux file.
-%
-\def\PageLabel#1{%
- \@bsphack
- \expandafter\ifx\csname p@#1\endcsname\relax
- \else
- \protected@write\@auxout{}%
- {\string\pagelabel{#1}{\thepage}}%
- % Ensure the p@NAME control sequence acquires correct value immediately
- \expandafter\xdef\csname p@#1\endcsname{\thepage}%
- \fi
- \@esphack}
-%
-% In \Link, add code to emit an aux-file entry if the p@NAME sequence isn't
-% defined. Much as in \@Setref, this ensures we'll process the referenced
-% item correctly on the next TeX run.
-%
-\def\Link#1{%
- \begingroup
- \SetupICs{#1}%
- \ifx\Label\@empty\let\Label\Element\fi
-% \typeout{Made a Link at \the\inputlineno, to \Label}%
- \hyper@linkstart{\LinkType}{\Label}%
- \NestedLinktrue
- % If p@NAME control sequence isn't defined, emit dummy def to aux file
- % so it will get defined properly on next run, much as in \@Setref
- \expandafter\ifx\csname p@\Label\endcsname\relax
- \immediate\write\@mainaux{\string\pagelabel{\Label}{qqq}}%
- \fi
-}
</part>
&biblio;
- <![%include-index;[&bookindex;]]>
- <![%include-xslt-index;[<index id="bookindex"></index>]]>
+ <index id="bookindex"></index>
</book>
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<!DOCTYPE xsl:stylesheet [
+<!ENTITY % common.entities SYSTEM "http://docbook.sourceforge.net/release/xsl/current/common/entities.ent">
+%common.entities;
+]>
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+ version="1.0">
+
+<!--
+ This file contains XSLT stylesheet customizations that are common to
+ all HTML output variants (chunked and single-page).
+ -->
+
+<!-- Parameters -->
+<xsl:param name="make.valid.html" select="1"></xsl:param>
+<xsl:param name="generate.id.attributes" select="1"></xsl:param>
+<xsl:param name="link.mailto.url">pgsql-docs@postgresql.org</xsl:param>
+<xsl:param name="toc.max.depth">2</xsl:param>
+
+
+<!-- Change display of some elements -->
+
+<xsl:template match="command">
+ <xsl:call-template name="inline.monoseq"/>
+</xsl:template>
+
+<xsl:template match="confgroup" mode="bibliography.mode">
+ <span>
+ <xsl:call-template name="common.html.attributes"/>
+ <xsl:call-template name="id.attribute"/>
+ <xsl:apply-templates select="conftitle/text()" mode="bibliography.mode"/>
+ <xsl:text>, </xsl:text>
+ <xsl:apply-templates select="confdates/text()" mode="bibliography.mode"/>
+ <xsl:copy-of select="$biblioentry.item.separator"/>
+ </span>
+</xsl:template>
+
+<xsl:template match="isbn" mode="bibliography.mode">
+ <span>
+ <xsl:call-template name="common.html.attributes"/>
+ <xsl:call-template name="id.attribute"/>
+ <xsl:text>ISBN </xsl:text>
+ <xsl:apply-templates mode="bibliography.mode"/>
+ <xsl:copy-of select="$biblioentry.item.separator"/>
+ </span>
+</xsl:template>
+
+
+<!-- table of contents configuration -->
+
+<xsl:param name="generate.toc">
+appendix toc,title
+article/appendix nop
+article toc,title
+book toc,title
+chapter toc,title
+part toc,title
+preface toc,title
+qandadiv toc
+qandaset toc
+reference toc,title
+sect1 toc
+sect2 toc
+sect3 toc
+sect4 toc
+sect5 toc
+section toc
+set toc,title
+</xsl:param>
+
+<xsl:param name="generate.section.toc.level" select="1"></xsl:param>
+
+<!-- include refentry under sect1 in tocs -->
+<xsl:template match="sect1" mode="toc">
+ <xsl:param name="toc-context" select="."/>
+ <xsl:call-template name="subtoc">
+ <xsl:with-param name="toc-context" select="$toc-context"/>
+ <xsl:with-param name="nodes" select="sect2|refentry
+ |bridgehead[$bridgehead.in.toc != 0]"/>
+ </xsl:call-template>
+</xsl:template>
+
+
+<!-- Put index "quicklinks" (A | B | C | ...) at the top of the bookindex page. -->
+
+<!-- from html/autoidx.xsl -->
+
+<xsl:template name="generate-basic-index">
+ <xsl:param name="scope" select="NOTANODE"/>
+
+ <xsl:variable name="role">
+ <xsl:if test="$index.on.role != 0">
+ <xsl:value-of select="@role"/>
+ </xsl:if>
+ </xsl:variable>
+
+ <xsl:variable name="type">
+ <xsl:if test="$index.on.type != 0">
+ <xsl:value-of select="@type"/>
+ </xsl:if>
+ </xsl:variable>
+
+ <xsl:variable name="terms"
+ select="//indexterm
+ [count(.|key('letter',
+ translate(substring(&primary;, 1, 1),
+ &lowercase;,
+ &uppercase;))
+ [&scope;][1]) = 1
+ and not(@class = 'endofrange')]"/>
+
+ <xsl:variable name="alphabetical"
+ select="$terms[contains(concat(&lowercase;, &uppercase;),
+ substring(&primary;, 1, 1))]"/>
+
+ <xsl:variable name="others" select="$terms[not(contains(concat(&lowercase;,
+ &uppercase;),
+ substring(&primary;, 1, 1)))]"/>
+
+ <div class="index">
+ <!-- pgsql-docs: begin added stuff -->
+ <p class="indexdiv-quicklinks">
+ <a href="#indexdiv-Symbols">
+ <xsl:call-template name="gentext">
+ <xsl:with-param name="key" select="'index symbols'"/>
+ </xsl:call-template>
+ </a>
+ <xsl:apply-templates select="$alphabetical[count(.|key('letter',
+ translate(substring(&primary;, 1, 1),
+ &lowercase;,&uppercase;))[&scope;][1]) = 1]"
+ mode="index-div-quicklinks">
+ <xsl:with-param name="position" select="position()"/>
+ <xsl:with-param name="scope" select="$scope"/>
+ <xsl:with-param name="role" select="$role"/>
+ <xsl:with-param name="type" select="$type"/>
+ <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
+ </xsl:apply-templates>
+ </p>
+ <!-- pgsql-docs: end added stuff -->
+
+ <xsl:if test="$others">
+ <xsl:choose>
+ <xsl:when test="normalize-space($type) != '' and
+ $others[@type = $type][count(.|key('primary', &primary;)[&scope;][1]) = 1]">
+ <!-- pgsql-docs: added id attribute here for linking to it -->
+ <div class="indexdiv" id="indexdiv-Symbols">
+ <h3>
+ <xsl:call-template name="gentext">
+ <xsl:with-param name="key" select="'index symbols'"/>
+ </xsl:call-template>
+ </h3>
+ <dl>
+ <xsl:apply-templates select="$others[count(.|key('primary', &primary;)[&scope;][1]) = 1]"
+ mode="index-symbol-div">
+ <xsl:with-param name="position" select="position()"/>
+ <xsl:with-param name="scope" select="$scope"/>
+ <xsl:with-param name="role" select="$role"/>
+ <xsl:with-param name="type" select="$type"/>
+ <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
+ </xsl:apply-templates>
+ </dl>
+ </div>
+ </xsl:when>
+ <xsl:when test="normalize-space($type) != ''">
+ <!-- Output nothing, as there isn't a match for $other using this $type -->
+ </xsl:when>
+ <xsl:otherwise>
+ <!-- pgsql-docs: added id attribute here for linking to it -->
+ <div class="indexdiv" id="indexdiv-Symbols">
+ <h3>
+ <xsl:call-template name="gentext">
+ <xsl:with-param name="key" select="'index symbols'"/>
+ </xsl:call-template>
+ </h3>
+ <dl>
+ <xsl:apply-templates select="$others[count(.|key('primary',
+ &primary;)[&scope;][1]) = 1]"
+ mode="index-symbol-div">
+ <xsl:with-param name="position" select="position()"/>
+ <xsl:with-param name="scope" select="$scope"/>
+ <xsl:with-param name="role" select="$role"/>
+ <xsl:with-param name="type" select="$type"/>
+ <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
+ </xsl:apply-templates>
+ </dl>
+ </div>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:if>
+
+ <xsl:apply-templates select="$alphabetical[count(.|key('letter',
+ translate(substring(&primary;, 1, 1),
+ &lowercase;,&uppercase;))[&scope;][1]) = 1]"
+ mode="index-div-basic">
+ <xsl:with-param name="position" select="position()"/>
+ <xsl:with-param name="scope" select="$scope"/>
+ <xsl:with-param name="role" select="$role"/>
+ <xsl:with-param name="type" select="$type"/>
+ <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
+ </xsl:apply-templates>
+ </div>
+</xsl:template>
+
+<xsl:template match="indexterm" mode="index-div-basic">
+ <xsl:param name="scope" select="."/>
+ <xsl:param name="role" select="''"/>
+ <xsl:param name="type" select="''"/>
+
+ <xsl:variable name="key"
+ select="translate(substring(&primary;, 1, 1),
+ &lowercase;,&uppercase;)"/>
+
+ <xsl:if test="key('letter', $key)[&scope;]
+ [count(.|key('primary', &primary;)[&scope;][1]) = 1]">
+ <div class="indexdiv">
+ <!-- pgsql-docs: added id attribute here for linking to it -->
+ <xsl:attribute name="id">
+ <xsl:value-of select="concat('indexdiv-', $key)"/>
+ </xsl:attribute>
+
+ <xsl:if test="contains(concat(&lowercase;, &uppercase;), $key)">
+ <h3>
+ <xsl:value-of select="translate($key, &lowercase;, &uppercase;)"/>
+ </h3>
+ </xsl:if>
+ <dl>
+ <xsl:apply-templates select="key('letter', $key)[&scope;]
+ [count(.|key('primary', &primary;)
+ [&scope;][1])=1]"
+ mode="index-primary">
+ <xsl:with-param name="position" select="position()"/>
+ <xsl:with-param name="scope" select="$scope"/>
+ <xsl:with-param name="role" select="$role"/>
+ <xsl:with-param name="type" select="$type"/>
+ <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
+ </xsl:apply-templates>
+ </dl>
+ </div>
+ </xsl:if>
+</xsl:template>
+
+<!-- pgsql-docs -->
+<xsl:template match="indexterm" mode="index-div-quicklinks">
+ <xsl:param name="scope" select="."/>
+ <xsl:param name="role" select="''"/>
+ <xsl:param name="type" select="''"/>
+
+ <xsl:variable name="key"
+ select="translate(substring(&primary;, 1, 1),
+ &lowercase;,&uppercase;)"/>
+
+ <xsl:if test="key('letter', $key)[&scope;]
+ [count(.|key('primary', &primary;)[&scope;][1]) = 1]">
+ <xsl:if test="contains(concat(&lowercase;, &uppercase;), $key)">
+ |
+ <a>
+ <xsl:attribute name="href">
+ <xsl:value-of select="concat('#indexdiv-', $key)"/>
+ </xsl:attribute>
+ <xsl:value-of select="translate($key, &lowercase;, &uppercase;)"/>
+ </a>
+ </xsl:if>
+ </xsl:if>
+</xsl:template>
+
+</xsl:stylesheet>
--- /dev/null
+<?xml version='1.0'?>
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+ version='1.0'
+ xmlns="http://www.w3.org/TR/xhtml1/transitional"
+ exclude-result-prefixes="#default">
+
+<xsl:import href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"/>
+<xsl:include href="stylesheet-common.xsl" />
+<xsl:include href="stylesheet-html-common.xsl" />
+<xsl:include href="stylesheet-speedup-xhtml.xsl" />
+
+</xsl:stylesheet>
+++ /dev/null
-<!-- doc/src/sgml/stylesheet.dsl -->
-<!DOCTYPE style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
-
-<!-- must turn on one of these with -i on the jade command line -->
-<!ENTITY % output-html "IGNORE">
-<!ENTITY % output-print "IGNORE">
-
-<![ %output-html; [
-<!ENTITY dbstyle PUBLIC "-//Norman Walsh//DOCUMENT DocBook HTML Stylesheet//EN" CDATA DSSSL>
-]]>
-
-<![ %output-print; [
-<!ENTITY dbstyle PUBLIC "-//Norman Walsh//DOCUMENT DocBook Print Stylesheet//EN" CDATA DSSSL>
-]]>
-
-]>
-
-<style-sheet>
- <style-specification use="docbook">
- <style-specification-body>
-
-<!-- general customization ......................................... -->
-
-<!-- (applicable to all output formats) -->
-
-(define draft-mode #f)
-
-(define pgsql-docs-list "pgsql-docs@postgresql.org")
-
-;; Don't show manpage volume numbers
-(define %refentry-xref-manvolnum% #f)
-
-;; Don't use graphics for callouts. (We could probably do that, but
-;; it needs extra work.)
-(define %callout-graphics% #f)
-
-;; Show comments during the development stage.
-(define %show-comments% draft-mode)
-
-;; Don't append period if run-in title ends with any of these
-;; characters. We had to add the colon here. This is fixed in
-;; stylesheets version 1.71, so it can be removed sometime.
-(define %content-title-end-punct%
- '(#\. #\! #\? #\:))
-
-;; No automatic punctuation after honorific name parts
-(define %honorific-punctuation% "")
-
-;; Change display of some elements
-(element command ($mono-seq$))
-(element envar ($mono-seq$))
-(element lineannotation ($italic-seq$))
-(element literal ($mono-seq$))
-(element option ($mono-seq$))
-(element parameter ($mono-seq$))
-(element structfield ($mono-seq$))
-(element structname ($mono-seq$))
-(element symbol ($mono-seq$))
-(element token ($mono-seq$))
-(element type ($mono-seq$))
-(element varname ($mono-seq$))
-(element (programlisting emphasis) ($bold-seq$)) ;; to highlight sections of code
-
-;; Special support for Tcl synopses
-(element optional
- (if (equal? (attribute-string (normalize "role")) "tcl")
- (make sequence
- (literal "?")
- ($charseq$)
- (literal "?"))
- (make sequence
- (literal %arg-choice-opt-open-str%)
- ($charseq$)
- (literal %arg-choice-opt-close-str%))))
-
-;; Avoid excessive cross-reference labels
-(define (auto-xref-indirect? target ancestor)
- (cond
-; ;; Always add indirect references to another book
-; ((member (gi ancestor) (book-element-list))
-; #t)
- ;; Add indirect references to the section or component a block
- ;; is in iff chapters aren't autolabelled. (Otherwise "Figure 1-3"
- ;; is sufficient)
- ((and (member (gi target) (block-element-list))
- (not %chapter-autolabel%))
- #t)
- ;; Add indirect references to the component a section is in if
- ;; the sections are not autolabelled
- ((and (member (gi target) (section-element-list))
- (member (gi ancestor) (component-element-list))
- (not %section-autolabel%))
- #t)
- (else #f)))
-
-
-;; Bibliography things
-
-;; Use the titles of bibliography entries in cross-references
-(define biblio-xref-title #t)
-
-;; Process bibliography entry components in the order shown below, not
-;; in the order they appear in the document. (I suppose this should
-;; be made to fit some publishing standard.)
-(define %biblioentry-in-entry-order% #f)
-
-(define (biblioentry-inline-elements)
- (list
- (normalize "author")
- (normalize "authorgroup")
- (normalize "title")
- (normalize "subtitle")
- (normalize "volumenum")
- (normalize "edition")
- (normalize "othercredit")
- (normalize "contrib")
- (normalize "editor")
- (normalize "publishername")
- (normalize "confgroup")
- (normalize "publisher")
- (normalize "isbn")
- (normalize "issn")
- (normalize "pubsnumber")
- (normalize "date")
- (normalize "pubdate")
- (normalize "pagenums")
- (normalize "bibliomisc")))
-
-(mode biblioentry-inline-mode
-
- (element confgroup
- (make sequence
- (literal "Proc. ")
- (next-match)))
-
- (element isbn
- (make sequence
- (literal "ISBN ")
- (process-children)))
-
- (element issn
- (make sequence
- (literal "ISSN ")
- (process-children))))
-
-
-;; The rules in the default stylesheet for productname format it as a
-;; paragraph. This may be suitable for productname directly within
-;; *info, but it's nonsense when productname is used inline, as we do.
-(mode book-titlepage-recto-mode
- (element (para productname) ($charseq$)))
-(mode book-titlepage-verso-mode
- (element (para productname) ($charseq$)))
-;; Add more here if needed...
-
-
-;; Replace a sequence of whitespace in a string by a single space
-(define (normalize-whitespace str #!optional (whitespace '(#\space #\U-000D)))
- (let loop ((characters (string->list str))
- (result '())
- (prev-was-space #f))
- (if (null? characters)
- (list->string (reverse result))
- (let ((c (car characters))
- (rest (cdr characters)))
- (if (member c whitespace)
- (if prev-was-space
- (loop rest result #t)
- (loop rest (cons #\space result) #t))
- (loop rest (cons c result) #f))))))
-
-
-<!-- HTML output customization ..................................... -->
-
-<![ %output-html; [
-
-(define %section-autolabel% #t)
-(define %label-preface-sections% #f)
-(define %generate-legalnotice-link% #t)
-(define %html-ext% ".html")
-(define %root-filename% "index")
-(define %link-mailto-url% (string-append "mailto:" pgsql-docs-list))
-(define %use-id-as-filename% #t)
-(define website-stylesheet #f)
-(define %stylesheet% (if website-stylesheet "http://www.postgresql.org/media/css/docs.css" "stylesheet.css"))
-(define %graphic-default-extension% "gif")
-(define %body-attr% '())
-(define ($generate-book-lot-list$) '())
-(define use-output-dir #t)
-(define %output-dir% "html")
-(define html-index-filename "../HTML.index")
-
-
-;; Only build HTML.index or the actual HTML output, not both. Saves a
-;; *lot* of time. (overrides docbook.dsl)
-(root
- (if (not html-index)
- (make sequence
- (process-children)
- (with-mode manifest
- (process-children)))
- (with-mode htmlindex
- (process-children))))
-
-
-;; Do not combine first section into chapter chunk.
-(define (chunk-skip-first-element-list) '())
-
-;; Returns the depth of auto TOC that should be made at the nd-level
-(define (toc-depth nd)
- (cond ((string=? (gi nd) (normalize "book")) 2)
- ((string=? (gi nd) (normalize "part")) 2)
- ((string=? (gi nd) (normalize "chapter")) 2)
- (else 1)))
-
-;; Add character encoding and time of creation into HTML header
-(define %html-header-tags%
- (list (list "META" '("HTTP-EQUIV" "Content-Type") '("CONTENT" "text/html; charset=ISO-8859-1"))
- (list "META" '("NAME" "creation") (list "CONTENT" (time->string (time) #t)))))
-
-
-;; Block elements are allowed in PARA in DocBook, but not in P in
-;; HTML. With %fix-para-wrappers% turned on, the stylesheets attempt
-;; to avoid putting block elements in HTML P tags by outputting
-;; additional end/begin P pairs around them.
-(define %fix-para-wrappers% #t)
-
-;; ...but we need to do some extra work to make the above apply to PRE
-;; as well. (mostly pasted from dbverb.dsl)
-(define ($verbatim-display$ indent line-numbers?)
- (let ((content (make element gi: "PRE"
- attributes: (list
- (list "CLASS" (gi)))
- (if (or indent line-numbers?)
- ($verbatim-line-by-line$ indent line-numbers?)
- (process-children)))))
- (if %shade-verbatim%
- (make element gi: "TABLE"
- attributes: ($shade-verbatim-attr$)
- (make element gi: "TR"
- (make element gi: "TD"
- content)))
- (make sequence
- (para-check)
- content
- (para-check 'restart)))))
-
-;; ...and for notes.
-(element note
- (make sequence
- (para-check)
- ($admonition$)
- (para-check 'restart)))
-
-;;; XXX The above is very ugly. It might be better to run 'tidy' on
-;;; the resulting *.html files.
-
-
-;; Format multiple terms in varlistentry vertically, instead
-;; of comma-separated.
-(element (varlistentry term)
- (make sequence
- (process-children-trim)
- (if (not (last-sibling?))
- (make empty-element gi: "BR")
- (empty-sosofo))))
-
-
-;; Customization of header
-;; - make title a link to the home page
-;; - add tool tips to Prev/Next links
-;; - add Up link
-;; (overrides dbnavig.dsl)
-(define (default-header-nav-tbl-noff elemnode prev next prevsib nextsib)
- (let* ((r1? (nav-banner? elemnode))
- (r1-sosofo (make element gi: "TR"
- (make element gi: "TH"
- attributes: (list
- (list "COLSPAN" "4")
- (list "ALIGN" "center")
- (list "VALIGN" "bottom"))
- (make element gi: "A"
- attributes: (list
- (list "HREF" (href-to (nav-home elemnode))))
- (nav-banner elemnode)))))
- (r2? (or (not (node-list-empty? prev))
- (not (node-list-empty? next))
- (nav-context? elemnode)))
- (r2-sosofo (make element gi: "TR"
- (make element gi: "TD"
- attributes: (list
- (list "WIDTH" "10%")
- (list "ALIGN" "left")
- (list "VALIGN" "top"))
- (if (node-list-empty? prev)
- (make entity-ref name: "nbsp")
- (make element gi: "A"
- attributes: (list
- (list "TITLE" (element-title-string prev))
- (list "HREF"
- (href-to
- prev))
- (list "ACCESSKEY"
- "P"))
- (gentext-nav-prev prev))))
- (make element gi: "TD"
- attributes: (list
- (list "WIDTH" "10%")
- (list "ALIGN" "left")
- (list "VALIGN" "top"))
- (if (nav-up? elemnode)
- (nav-up elemnode)
- (nav-home-link elemnode)))
- (make element gi: "TD"
- attributes: (list
- (list "WIDTH" "60%")
- (list "ALIGN" "center")
- (list "VALIGN" "bottom"))
- (nav-context elemnode))
- (make element gi: "TD"
- attributes: (list
- (list "WIDTH" "20%")
- (list "ALIGN" "right")
- (list "VALIGN" "top"))
- (if (node-list-empty? next)
- (make entity-ref name: "nbsp")
- (make element gi: "A"
- attributes: (list
- (list "TITLE" (element-title-string next))
- (list "HREF"
- (href-to
- next))
- (list "ACCESSKEY"
- "N"))
- (gentext-nav-next next)))))))
- (if (or r1? r2?)
- (make element gi: "DIV"
- attributes: '(("CLASS" "NAVHEADER"))
- (make element gi: "TABLE"
- attributes: (list
- (list "SUMMARY" "Header navigation table")
- (list "WIDTH" %gentext-nav-tblwidth%)
- (list "BORDER" "0")
- (list "CELLPADDING" "0")
- (list "CELLSPACING" "0"))
- (if r1? r1-sosofo (empty-sosofo))
- (if r2? r2-sosofo (empty-sosofo)))
- (make empty-element gi: "HR"
- attributes: (list
- (list "ALIGN" "LEFT")
- (list "WIDTH" %gentext-nav-tblwidth%))))
- (empty-sosofo))))
-
-
-;; Put index "quicklinks" (A | B | C | ...) at the top of the bookindex page.
-
-(element index
- (let ((preamble (node-list-filter-by-not-gi
- (children (current-node))
- (list (normalize "indexentry"))))
- (indexdivs (node-list-filter-by-gi
- (children (current-node))
- (list (normalize "indexdiv"))))
- (entries (node-list-filter-by-gi
- (children (current-node))
- (list (normalize "indexentry")))))
- (html-document
- (with-mode head-title-mode
- (literal (element-title-string (current-node))))
- (make element gi: "DIV"
- attributes: (list (list "CLASS" (gi)))
- ($component-separator$)
- ($component-title$)
- (if (node-list-empty? indexdivs)
- (empty-sosofo)
- (make element gi: "P"
- attributes: (list (list "CLASS" "INDEXDIV-QUICKLINKS"))
- (with-mode indexdiv-quicklinks-mode
- (process-node-list indexdivs))))
- (process-node-list preamble)
- (if (node-list-empty? entries)
- (empty-sosofo)
- (make element gi: "DL"
- (process-node-list entries)))))))
-
-
-(mode indexdiv-quicklinks-mode
- (element indexdiv
- (make sequence
- (make element gi: "A"
- attributes: (list (list "HREF" (href-to (current-node))))
- (element-title-sosofo))
- (if (not (last-sibling?))
- (literal " | ")
- (literal "")))))
-
-
-;; Changed to strip and normalize index term content (overrides
-;; dbindex.dsl)
-(define (htmlindexterm)
- (let* ((attr (gi (current-node)))
- (content (data (current-node)))
- (string (strip (normalize-whitespace content))) ;; changed
- (sortas (attribute-string (normalize "sortas"))))
- (make sequence
- (make formatting-instruction data: attr)
- (if sortas
- (make sequence
- (make formatting-instruction data: "[")
- (make formatting-instruction data: sortas)
- (make formatting-instruction data: "]"))
- (empty-sosofo))
- (make formatting-instruction data: " ")
- (make formatting-instruction data: string)
- (htmlnewline))))
-
-
-]]> <!-- %output-html -->
-
-
-<!-- Print output customization .................................... -->
-
-<![ %output-print; [
-
-(define %section-autolabel% #t)
-(define %default-quadding% 'justify)
-
-;; Don't know how well hyphenation works with other backends. Might
-;; turn this on if desired.
-(define %hyphenation%
- (if tex-backend #t #f))
-
-;; Put footnotes at the bottom of the page (rather than end of
-;; section), and put the URLs of links into footnotes.
-;;
-;; bop-footnotes only works with TeX, otherwise it's ignored. But
-;; when both of these are #t and TeX is used, you need at least
-;; stylesheets 1.73 because otherwise you don't get any footnotes at
-;; all for the links.
-(define bop-footnotes #t)
-(define %footnote-ulinks% #t)
-
-(define %refentry-new-page% #t)
-(define %refentry-keep% #f)
-
-;; Disabled because of TeX problems
-;; (http://archives.postgresql.org/pgsql-docs/2007-12/msg00056.php)
-(define ($generate-book-lot-list$) '())
-
-;; Indentation of verbatim environments. (This should really be done
-;; with start-indent in DSSSL.)
-;; Use of indentation in this area exposes a bug in openjade,
-;; http://archives.postgresql.org/pgsql-docs/2006-12/msg00064.php
-;; (define %indent-programlisting-lines% " ")
-;; (define %indent-screen-lines% " ")
-;; (define %indent-synopsis-lines% " ")
-
-
-;; Default graphic format: Jadetex wants eps, pdfjadetex wants pdf.
-;; (Note that pdfjadetex will not accept eps, that's why we need to
-;; create a different .tex file for each.) What works with RTF?
-
-(define texpdf-output #f) ;; override from command line
-
-(define %graphic-default-extension%
- (cond (tex-backend (if texpdf-output "pdf" "eps"))
- (rtf-backend "gif")
- (else "XXX")))
-
-;; Need to add pdf here so that the above works. Default setup
-;; doesn't know about PDF.
-(define preferred-mediaobject-extensions
- (list "eps" "ps" "jpg" "jpeg" "pdf" "png"))
-
-
-;; Don't show links when citing a bibliography entry. This fouls up
-;; the footnumber counting. To get the link, one can still look into
-;; the bibliography itself.
-(mode xref-title-mode
- (element ulink
- (process-children)))
-
-
-;; Format legalnotice justified and with space between paragraphs.
-(mode book-titlepage-verso-mode
- (element (legalnotice para)
- (make paragraph
- use: book-titlepage-verso-style ;; alter this if ever it needs to appear elsewhere
- quadding: %default-quadding%
- line-spacing: (* 0.8 (inherited-line-spacing))
- font-size: (* 0.8 (inherited-font-size))
- space-before: (* 0.8 %para-sep%)
- space-after: (* 0.8 %para-sep%)
- first-line-start-indent: (if (is-first-para)
- (* 0.8 %para-indent-firstpara%)
- (* 0.8 %para-indent%))
- (process-children))))
-
-
-;; Fix spacing problems in variablelists
-
-(element (varlistentry term)
- (make paragraph
- space-before: (if (first-sibling?)
- %para-sep%
- 0pt)
- keep-with-next?: #t
- (process-children)))
-
-(define %varlistentry-indent% 2em)
-
-(element (varlistentry listitem)
- (make sequence
- start-indent: (+ (inherited-start-indent) %varlistentry-indent%)
- (process-children)))
-
-
-;; Whitespace fixes for itemizedlists and orderedlists
-
-(define (process-listitem-content)
- (if (absolute-first-sibling?)
- (make sequence
- (process-children-trim))
- (next-match)))
-
-
-;; Default stylesheets format simplelists as tables. This spells
-;; trouble for Jade. So we just format them as plain lines.
-
-(define %simplelist-indent% 1em)
-
-(define (my-simplelist-vert members)
- (make display-group
- space-before: %para-sep%
- space-after: %para-sep%
- start-indent: (+ %simplelist-indent% (inherited-start-indent))
- (process-children)))
-
-(element simplelist
- (let ((type (attribute-string (normalize "type")))
- (cols (if (attribute-string (normalize "columns"))
- (if (> (string->number (attribute-string (normalize "columns"))) 0)
- (string->number (attribute-string (normalize "columns")))
- 1)
- 1))
- (members (select-elements (children (current-node)) (normalize "member"))))
- (cond
- ((equal? type (normalize "inline"))
- (if (equal? (gi (parent (current-node)))
- (normalize "para"))
- (process-children)
- (make paragraph
- space-before: %para-sep%
- space-after: %para-sep%
- start-indent: (inherited-start-indent))))
- ((equal? type (normalize "vert"))
- (my-simplelist-vert members))
- ((equal? type (normalize "horiz"))
- (simplelist-table 'row cols members)))))
-
-(element member
- (let ((type (inherited-attribute-string (normalize "type"))))
- (cond
- ((equal? type (normalize "inline"))
- (make sequence
- (process-children)
- (if (not (last-sibling?))
- (literal ", ")
- (literal ""))))
- ((equal? type (normalize "vert"))
- (make paragraph
- space-before: 0pt
- space-after: 0pt))
- ((equal? type (normalize "horiz"))
- (make paragraph
- quadding: 'start
- (process-children))))))
-
-
-;; Jadetex doesn't handle links to the content of tables, so
-;; indexterms that point to table entries will go nowhere. We fix
-;; this by pointing the index entry to the table itself instead, which
-;; should be equally useful in practice.
-
-(define (find-parent-table nd)
- (let ((table (ancestor-member nd ($table-element-list$))))
- (if (node-list-empty? table)
- nd
- table)))
-
-;; (The function below overrides the one in print/dbindex.dsl.)
-
-(define (indexentry-link nd)
- (let* ((id (attribute-string (normalize "role") nd))
- (prelim-target (find-indexterm id))
- (target (find-parent-table prelim-target))
- (preferred (not (node-list-empty?
- (select-elements (children (current-node))
- (normalize "emphasis")))))
- (sosofo (if (node-list-empty? target)
- (literal "?")
- (make link
- destination: (node-list-address target)
- (with-mode toc-page-number-mode
- (process-node-list target))))))
- (if preferred
- (make sequence
- font-weight: 'bold
- sosofo)
- sosofo)))
-
-
-;; By default, the part and reference title pages get wrong page
-;; numbers: The first title page gets roman numerals carried over from
-;; preface/toc -- we want Arabic numerals. We also need to make sure
-;; that page-number-restart is set of #f explicitly, because otherwise
-;; it will carry over from the previous component, which is not good.
-;;
-;; (This looks worse than it is. It's copied from print/dbttlpg.dsl
-;; and common/dbcommon.dsl and modified in minor detail.)
-
-(define (first-part?)
- (let* ((book (ancestor (normalize "book")))
- (nd (ancestor-member (current-node)
- (append
- (component-element-list)
- (division-element-list))))
- (bookch (children book)))
- (let loop ((nl bookch))
- (if (node-list-empty? nl)
- #f
- (if (equal? (gi (node-list-first nl)) (normalize "part"))
- (if (node-list=? (node-list-first nl) nd)
- #t
- #f)
- (loop (node-list-rest nl)))))))
-
-(define (first-reference?)
- (let* ((book (ancestor (normalize "book")))
- (nd (ancestor-member (current-node)
- (append
- (component-element-list)
- (division-element-list))))
- (bookch (children book)))
- (let loop ((nl bookch))
- (if (node-list-empty? nl)
- #f
- (if (equal? (gi (node-list-first nl)) (normalize "reference"))
- (if (node-list=? (node-list-first nl) nd)
- #t
- #f)
- (loop (node-list-rest nl)))))))
-
-
-(define (part-titlepage elements #!optional (side 'recto))
- (let ((nodelist (titlepage-nodelist
- (if (equal? side 'recto)
- (reference-titlepage-recto-elements)
- (reference-titlepage-verso-elements))
- elements))
- ;; partintro is a special case...
- (partintro (node-list-first
- (node-list-filter-by-gi elements (list (normalize "partintro"))))))
- (if (part-titlepage-content? elements side)
- (make simple-page-sequence
- page-n-columns: %titlepage-n-columns%
- ;; Make sure that page number format is correct.
- page-number-format: ($page-number-format$)
- ;; Make sure that the page number is set to 1 if this is the
- ;; first part in the book
- page-number-restart?: (first-part?)
- input-whitespace-treatment: 'collapse
- use: default-text-style
-
- ;; This hack is required for the RTF backend. If an external-graphic
- ;; is the first thing on the page, RTF doesn't seem to do the right
- ;; thing (the graphic winds up on the baseline of the first line
- ;; of the page, left justified). This "one point rule" fixes
- ;; that problem.
- (make paragraph
- line-spacing: 1pt
- (literal ""))
-
- (let loop ((nl nodelist) (lastnode (empty-node-list)))
- (if (node-list-empty? nl)
- (empty-sosofo)
- (make sequence
- (if (or (node-list-empty? lastnode)
- (not (equal? (gi (node-list-first nl))
- (gi lastnode))))
- (part-titlepage-before (node-list-first nl) side)
- (empty-sosofo))
- (cond
- ((equal? (gi (node-list-first nl)) (normalize "subtitle"))
- (part-titlepage-subtitle (node-list-first nl) side))
- ((equal? (gi (node-list-first nl)) (normalize "title"))
- (part-titlepage-title (node-list-first nl) side))
- (else
- (part-titlepage-default (node-list-first nl) side)))
- (loop (node-list-rest nl) (node-list-first nl)))))
-
- (if (and %generate-part-toc%
- %generate-part-toc-on-titlepage%
- (equal? side 'recto))
- (make display-group
- (build-toc (current-node)
- (toc-depth (current-node))))
- (empty-sosofo))
-
- ;; PartIntro is a special case
- (if (and (equal? side 'recto)
- (not (node-list-empty? partintro))
- %generate-partintro-on-titlepage%)
- ($process-partintro$ partintro #f)
- (empty-sosofo)))
-
- (empty-sosofo))))
-
-
-(define (reference-titlepage elements #!optional (side 'recto))
- (let ((nodelist (titlepage-nodelist
- (if (equal? side 'recto)
- (reference-titlepage-recto-elements)
- (reference-titlepage-verso-elements))
- elements))
- ;; partintro is a special case...
- (partintro (node-list-first
- (node-list-filter-by-gi elements (list (normalize "partintro"))))))
- (if (reference-titlepage-content? elements side)
- (make simple-page-sequence
- page-n-columns: %titlepage-n-columns%
- ;; Make sure that page number format is correct.
- page-number-format: ($page-number-format$)
- ;; Make sure that the page number is set to 1 if this is the
- ;; first part in the book
- page-number-restart?: (first-reference?)
- input-whitespace-treatment: 'collapse
- use: default-text-style
-
- ;; This hack is required for the RTF backend. If an external-graphic
- ;; is the first thing on the page, RTF doesn't seem to do the right
- ;; thing (the graphic winds up on the baseline of the first line
- ;; of the page, left justified). This "one point rule" fixes
- ;; that problem.
- (make paragraph
- line-spacing: 1pt
- (literal ""))
-
- (let loop ((nl nodelist) (lastnode (empty-node-list)))
- (if (node-list-empty? nl)
- (empty-sosofo)
- (make sequence
- (if (or (node-list-empty? lastnode)
- (not (equal? (gi (node-list-first nl))
- (gi lastnode))))
- (reference-titlepage-before (node-list-first nl) side)
- (empty-sosofo))
- (cond
- ((equal? (gi (node-list-first nl)) (normalize "author"))
- (reference-titlepage-author (node-list-first nl) side))
- ((equal? (gi (node-list-first nl)) (normalize "authorgroup"))
- (reference-titlepage-authorgroup (node-list-first nl) side))
- ((equal? (gi (node-list-first nl)) (normalize "corpauthor"))
- (reference-titlepage-corpauthor (node-list-first nl) side))
- ((equal? (gi (node-list-first nl)) (normalize "editor"))
- (reference-titlepage-editor (node-list-first nl) side))
- ((equal? (gi (node-list-first nl)) (normalize "subtitle"))
- (reference-titlepage-subtitle (node-list-first nl) side))
- ((equal? (gi (node-list-first nl)) (normalize "title"))
- (reference-titlepage-title (node-list-first nl) side))
- (else
- (reference-titlepage-default (node-list-first nl) side)))
- (loop (node-list-rest nl) (node-list-first nl)))))
-
- (if (and %generate-reference-toc%
- %generate-reference-toc-on-titlepage%
- (equal? side 'recto))
- (make display-group
- (build-toc (current-node)
- (toc-depth (current-node))))
- (empty-sosofo))
-
- ;; PartIntro is a special case
- (if (and (equal? side 'recto)
- (not (node-list-empty? partintro))
- %generate-partintro-on-titlepage%)
- ($process-partintro$ partintro #f)
- (empty-sosofo)))
-
- (empty-sosofo))))
-
-]]> <!-- %output-print -->
-
- </style-specification-body>
- </style-specification>
-
- <external-specification id="docbook" document="dbstyle">
-</style-sheet>
<?xml version='1.0'?>
-<!DOCTYPE xsl:stylesheet [
-<!ENTITY % common.entities SYSTEM "http://docbook.sourceforge.net/release/xsl/current/common/entities.ent">
-%common.entities;
-]>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
version='1.0'
xmlns="http://www.w3.org/TR/xhtml1/transitional"
<xsl:import href="http://docbook.sourceforge.net/release/xsl/current/xhtml/chunk.xsl"/>
<xsl:include href="stylesheet-common.xsl" />
+<xsl:include href="stylesheet-html-common.xsl" />
<xsl:include href="stylesheet-speedup-xhtml.xsl" />
<!-- Parameters -->
<xsl:param name="base.dir" select="'html/'"></xsl:param>
<xsl:param name="use.id.as.filename" select="'1'"></xsl:param>
-<xsl:param name="make.valid.html" select="1"></xsl:param>
-<xsl:param name="generate.id.attributes" select="1"></xsl:param>
<xsl:param name="generate.legalnotice.link" select="1"></xsl:param>
-<xsl:param name="link.mailto.url">pgsql-docs@postgresql.org</xsl:param>
<xsl:param name="chunk.first.sections" select="1"/>
<xsl:param name="chunk.quietly" select="1"></xsl:param>
-<xsl:param name="toc.max.depth">2</xsl:param>
<xsl:param name="website.stylesheet" select="0"/>
</xsl:param>
-<!-- Change display of some elements -->
-
-<xsl:template match="command">
- <xsl:call-template name="inline.monoseq"/>
-</xsl:template>
-
-<xsl:template match="confgroup" mode="bibliography.mode">
- <span>
- <xsl:call-template name="common.html.attributes"/>
- <xsl:call-template name="id.attribute"/>
- <xsl:apply-templates select="conftitle/text()" mode="bibliography.mode"/>
- <xsl:text>, </xsl:text>
- <xsl:apply-templates select="confdates/text()" mode="bibliography.mode"/>
- <xsl:copy-of select="$biblioentry.item.separator"/>
- </span>
-</xsl:template>
-
-<xsl:template match="isbn" mode="bibliography.mode">
- <span>
- <xsl:call-template name="common.html.attributes"/>
- <xsl:call-template name="id.attribute"/>
- <xsl:text>ISBN </xsl:text>
- <xsl:apply-templates mode="bibliography.mode"/>
- <xsl:copy-of select="$biblioentry.item.separator"/>
- </span>
-</xsl:template>
-
-
-<!-- table of contents configuration -->
-
-<xsl:param name="generate.toc">
-appendix toc,title
-article/appendix nop
-article toc,title
-book toc,title
-chapter toc,title
-part toc,title
-preface toc,title
-qandadiv toc
-qandaset toc
-reference toc,title
-sect1 toc
-sect2 toc
-sect3 toc
-sect4 toc
-sect5 toc
-section toc
-set toc,title
-</xsl:param>
-
-<xsl:param name="generate.section.toc.level" select="1"></xsl:param>
-
-<!-- include refentry under sect1 in tocs -->
-<xsl:template match="sect1" mode="toc">
- <xsl:param name="toc-context" select="."/>
- <xsl:call-template name="subtoc">
- <xsl:with-param name="toc-context" select="$toc-context"/>
- <xsl:with-param name="nodes" select="sect2|refentry
- |bridgehead[$bridgehead.in.toc != 0]"/>
- </xsl:call-template>
-</xsl:template>
-
-
-<!-- Put index "quicklinks" (A | B | C | ...) at the top of the bookindex page. -->
-
-<!-- from html/autoidx.xsl -->
-
-<xsl:template name="generate-basic-index">
- <xsl:param name="scope" select="NOTANODE"/>
-
- <xsl:variable name="role">
- <xsl:if test="$index.on.role != 0">
- <xsl:value-of select="@role"/>
- </xsl:if>
- </xsl:variable>
-
- <xsl:variable name="type">
- <xsl:if test="$index.on.type != 0">
- <xsl:value-of select="@type"/>
- </xsl:if>
- </xsl:variable>
-
- <xsl:variable name="terms"
- select="//indexterm
- [count(.|key('letter',
- translate(substring(&primary;, 1, 1),
- &lowercase;,
- &uppercase;))
- [&scope;][1]) = 1
- and not(@class = 'endofrange')]"/>
-
- <xsl:variable name="alphabetical"
- select="$terms[contains(concat(&lowercase;, &uppercase;),
- substring(&primary;, 1, 1))]"/>
-
- <xsl:variable name="others" select="$terms[not(contains(concat(&lowercase;,
- &uppercase;),
- substring(&primary;, 1, 1)))]"/>
-
- <div class="index">
- <!-- pgsql-docs: begin added stuff -->
- <p class="indexdiv-quicklinks">
- <a href="#indexdiv-Symbols">
- <xsl:call-template name="gentext">
- <xsl:with-param name="key" select="'index symbols'"/>
- </xsl:call-template>
- </a>
- <xsl:apply-templates select="$alphabetical[count(.|key('letter',
- translate(substring(&primary;, 1, 1),
- &lowercase;,&uppercase;))[&scope;][1]) = 1]"
- mode="index-div-quicklinks">
- <xsl:with-param name="position" select="position()"/>
- <xsl:with-param name="scope" select="$scope"/>
- <xsl:with-param name="role" select="$role"/>
- <xsl:with-param name="type" select="$type"/>
- <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
- </xsl:apply-templates>
- </p>
- <!-- pgsql-docs: end added stuff -->
-
- <xsl:if test="$others">
- <xsl:choose>
- <xsl:when test="normalize-space($type) != '' and
- $others[@type = $type][count(.|key('primary', &primary;)[&scope;][1]) = 1]">
- <!-- pgsql-docs: added id attribute here for linking to it -->
- <div class="indexdiv" id="indexdiv-Symbols">
- <h3>
- <xsl:call-template name="gentext">
- <xsl:with-param name="key" select="'index symbols'"/>
- </xsl:call-template>
- </h3>
- <dl>
- <xsl:apply-templates select="$others[count(.|key('primary', &primary;)[&scope;][1]) = 1]"
- mode="index-symbol-div">
- <xsl:with-param name="position" select="position()"/>
- <xsl:with-param name="scope" select="$scope"/>
- <xsl:with-param name="role" select="$role"/>
- <xsl:with-param name="type" select="$type"/>
- <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
- </xsl:apply-templates>
- </dl>
- </div>
- </xsl:when>
- <xsl:when test="normalize-space($type) != ''">
- <!-- Output nothing, as there isn't a match for $other using this $type -->
- </xsl:when>
- <xsl:otherwise>
- <!-- pgsql-docs: added id attribute here for linking to it -->
- <div class="indexdiv" id="indexdiv-Symbols">
- <h3>
- <xsl:call-template name="gentext">
- <xsl:with-param name="key" select="'index symbols'"/>
- </xsl:call-template>
- </h3>
- <dl>
- <xsl:apply-templates select="$others[count(.|key('primary',
- &primary;)[&scope;][1]) = 1]"
- mode="index-symbol-div">
- <xsl:with-param name="position" select="position()"/>
- <xsl:with-param name="scope" select="$scope"/>
- <xsl:with-param name="role" select="$role"/>
- <xsl:with-param name="type" select="$type"/>
- <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
- </xsl:apply-templates>
- </dl>
- </div>
- </xsl:otherwise>
- </xsl:choose>
- </xsl:if>
-
- <xsl:apply-templates select="$alphabetical[count(.|key('letter',
- translate(substring(&primary;, 1, 1),
- &lowercase;,&uppercase;))[&scope;][1]) = 1]"
- mode="index-div-basic">
- <xsl:with-param name="position" select="position()"/>
- <xsl:with-param name="scope" select="$scope"/>
- <xsl:with-param name="role" select="$role"/>
- <xsl:with-param name="type" select="$type"/>
- <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
- </xsl:apply-templates>
- </div>
-</xsl:template>
-
-<xsl:template match="indexterm" mode="index-div-basic">
- <xsl:param name="scope" select="."/>
- <xsl:param name="role" select="''"/>
- <xsl:param name="type" select="''"/>
-
- <xsl:variable name="key"
- select="translate(substring(&primary;, 1, 1),
- &lowercase;,&uppercase;)"/>
-
- <xsl:if test="key('letter', $key)[&scope;]
- [count(.|key('primary', &primary;)[&scope;][1]) = 1]">
- <div class="indexdiv">
- <!-- pgsql-docs: added id attribute here for linking to it -->
- <xsl:attribute name="id">
- <xsl:value-of select="concat('indexdiv-', $key)"/>
- </xsl:attribute>
-
- <xsl:if test="contains(concat(&lowercase;, &uppercase;), $key)">
- <h3>
- <xsl:value-of select="translate($key, &lowercase;, &uppercase;)"/>
- </h3>
- </xsl:if>
- <dl>
- <xsl:apply-templates select="key('letter', $key)[&scope;]
- [count(.|key('primary', &primary;)
- [&scope;][1])=1]"
- mode="index-primary">
- <xsl:with-param name="position" select="position()"/>
- <xsl:with-param name="scope" select="$scope"/>
- <xsl:with-param name="role" select="$role"/>
- <xsl:with-param name="type" select="$type"/>
- <xsl:sort select="translate(&primary;, &lowercase;, &uppercase;)"/>
- </xsl:apply-templates>
- </dl>
- </div>
- </xsl:if>
-</xsl:template>
-
-<!-- pgsql-docs -->
-<xsl:template match="indexterm" mode="index-div-quicklinks">
- <xsl:param name="scope" select="."/>
- <xsl:param name="role" select="''"/>
- <xsl:param name="type" select="''"/>
-
- <xsl:variable name="key"
- select="translate(substring(&primary;, 1, 1),
- &lowercase;,&uppercase;)"/>
-
- <xsl:if test="key('letter', $key)[&scope;]
- [count(.|key('primary', &primary;)[&scope;][1]) = 1]">
- <xsl:if test="contains(concat(&lowercase;, &uppercase;), $key)">
- |
- <a>
- <xsl:attribute name="href">
- <xsl:value-of select="concat('#indexdiv-', $key)"/>
- </xsl:attribute>
- <xsl:value-of select="translate($key, &lowercase;, &uppercase;)"/>
- </a>
- </xsl:if>
- </xsl:if>
-</xsl:template>
-
-
<!--
Customization of header
- add Up and Home links
# Documentation
-have_docbook = @have_docbook@
-COLLATEINDEX = @COLLATEINDEX@
DBTOEPUB = @DBTOEPUB@
-DOCBOOKSTYLE = @DOCBOOKSTYLE@
-JADE = @JADE@
+FOP = @FOP@
NSGMLS = @NSGMLS@
OSX = @OSX@
XMLLINT = @XMLLINT@
projects / postgresql.git / commitdiff