Initial changes for IDF v5.5 and ESP32-C5

.github/workflows/push.yml

@@ -25,7 +25,7 @@ jobs:
     runs-on: ubuntu-latest
     strategy:
       matrix:
-        target: [esp32, esp32s2, esp32s3, esp32c2, esp32c3, esp32c6, esp32h2, esp32p4]
+        target: [esp32, esp32s2, esp32s3, esp32c2, esp32c3, esp32c6, esp32h2, esp32p4, esp32c5]
       fail-fast: false
     steps:
     - uses: actions/checkout@v4

configs/builds.json

@@ -4,7 +4,7 @@
 			"file":"libspi_flash.a",
 			"src":"build/esp-idf/spi_flash/libspi_flash.a",
 			"out":"lib/libspi_flash.a",
-			"targets":["esp32","esp32c2","esp32c3","esp32s2","esp32s3","esp32c6","esp32h2","esp32p4"]
+			"targets":["esp32","esp32c2","esp32c3","esp32s2","esp32s3","esp32c6","esp32h2","esp32p4","esp32c5"]
 		},
 		{
 			"file":"libesp_psram.a",
@@ -44,6 +44,20 @@
 		}
 	],
 	"targets":[
+		{
+			"target": "esp32c5",
+			"features":[],
+			"idf_libs":["qio","80m"],
+			"bootloaders":[
+				["qio","80m"],
+				["dio","80m"],
+				["qio","40m"],
+				["dio","40m"]
+			],
+			"mem_variants":[
+				["dio","80m"]
+			]
+		},
 		{
 			"target": "esp32p4",
 			"features":["qio_ram"],

configs/defconfig.esp32c5

@@ -0,0 +1,51 @@
+CONFIG_BT_ENABLED=y
+CONFIG_BT_BLE_BLUFI_ENABLE=y
+CONFIG_RTC_CLK_CAL_CYCLES=576
+# CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 is not set
+CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
+# This Enables RISCV LP for C6 - but it can't be used within Arduino at this time. 
+#CONFIG_ULP_COPROC_ENABLED=y
+#CONFIG_ULP_COPROC_LP_CORE=y
+#CONFIG_ULP_COPROC_RESERVE_MEM=4096
+
+#
+# OpenThread
+#
+CONFIG_OPENTHREAD_ENABLED=y
+# Border Router disabled
+# CONFIG_OPENTHREAD_BORDER_ROUTER=y
+# CONFIG_OPENTHREAD_RADIO_SPINEL_UART=y
+
+# DNS64 and NAT64 will be disabled for a while
+# OT IDF issue https://github.com/espressif/esp-idf/issues/15069
+# CONFIG_OPENTHREAD_DNS64_CLIENT=y
+
+# Radio for RPC
+# CONFIG_OPENTHREAD_RADIO=y 
+# CONFIG_OPENTHREAD_RADIO_NATIVE=y
+# CONFIG_OPENTHREAD_DIAG=n
+CONFIG_OPENTHREAD_COMMISSIONER=y
+CONFIG_OPENTHREAD_JOINER=y
+CONFIG_OPENTHREAD_CLI=y
+CONFIG_OPENTHREAD_SRP_CLIENT=y
+CONFIG_OPENTHREAD_DNS_CLIENT=y
+# Default dataset for quick start
+CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
+CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
+CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
+CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
+CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
+CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
+CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
+# end of OpenThread
+
+# Matter shall use only WiFi
+CONFIG_ENABLE_MATTER_OVER_THREAD=n
+
+#
+# Zigbee
+#
+CONFIG_ZB_ENABLED=y
+CONFIG_ZB_ZED=y
+CONFIG_ZB_RADIO_NATIVE=y
+# end of Zigbee

tools/config.sh

@@ -6,11 +6,11 @@ if [ -z $IDF_PATH ]; then
 fi
 
 if [ -z $IDF_BRANCH ]; then
-    IDF_BRANCH="release/v5.4"
+    IDF_BRANCH="master"
 fi
 
 if [ -z $AR_PR_TARGET_BRANCH ]; then
-    AR_PR_TARGET_BRANCH="release/v3.2.x"
+    AR_PR_TARGET_BRANCH="release/v3.3.x"
 fi
 
 if [ -z $IDF_TARGET ]; then