diff --git a/i18n/bg.json b/i18n/bg.json
new file mode 100644
index 000000000..685624dbd
--- /dev/null
+++ b/i18n/bg.json
@@ -0,0 +1,334 @@
+{
+ "arduino": {
+ "common": {
+ "offlineIndicator": "Изглежда, че сте офлайн. Без интернет връзка, Arduino CLI може да не успее да изтегли необходимите ресурси и може да причини неизправност. Моля, свържете се с интернет и рестартирайте приложението.",
+ "noBoardSelected": "Не е избрана платка",
+ "selectedOn": "на {0}",
+ "notConnected": "[няма връзка]",
+ "serialMonitor": "Сериен Монитор",
+ "oldFormat": "„{0}“ все още използва стария формат .pde. Искате ли да преминете към новото разширение `.ino`?",
+ "later": "По-късно",
+ "selectBoard": "Изберете платка",
+ "unknown": "Неизвестно",
+ "processing": "Обработва се",
+ "saveChangesToSketch": "Искате ли да запазите промените в тази скица, преди да затворите?",
+ "loseChanges": "Ако не запазите, промените ви ще бъдат загубени."
+ },
+ "menu": {
+ "sketch": "Скица",
+ "tools": "Инструменти"
+ },
+ "debug": {
+ "optimizeForDebugging": "Оптимизиране за отстраняване на грешки",
+ "debugWithMessage": "Отстраняване на грешки - {0}",
+ "noPlatformInstalledFor": "Платформата не е инсталирана за „{0}“",
+ "debuggingNotSupported": "Отстраняването на грешки не се поддържа от „{0}“"
+ },
+ "preferences": {
+ "language.log": "True, ако езиковият сървър на Arduino трябва да генерира лог файлове в папката за скици. В противен случай false. По подразбиране е false.",
+ "compile.verbose": "True за подробен изход за компилиране. False по подразбиране",
+ "compile.warnings": "Указва на gcc кое ниво на предупреждение да използва. По подразбиране е „None“.",
+ "upload.verbose": "True за подробен изход за качване. False по подразбиране.",
+ "window.autoScale": "True , ако потребителският интерфейс автоматично се мащабира с размера на шрифта.",
+ "window.zoomLevel": "Регулирайте нивото на увеличение на прозореца. Оригиналният размер е 0 и всяко увеличение над (напр. 1) или под (напр. -1) представлява увеличение с 20% по-голямо или по-малко. Можете също да въведете десетични знаци, за да регулирате нивото на увеличение по-финно.",
+ "ide.autoUpdate": "True, за да активирате автоматичните проверки за актуализация. IDE ще проверява за актуализации автоматично и периодично.",
+ "board.certificates": "Списък със сертификати, които могат да бъдат качени на платката",
+ "sketchbook.showAllFiles": "True , за да се покажат всички файлове вътре в скицата. По подразбиране е false.",
+ "cloud.enabled": "True , ако функциите за синхронизиране на скицата са активирани. По подразбиране е true.",
+ "cloud.pull.warn": "True е, ако потребителите трябва да бъдат предупредени, преди да се изтегли скица от облака. По подразбиране е true.",
+ "cloud.push.warn": "True, ако потребителите трябва да бъдат предупредени, преди да бъде пусната скица в облака. По подразбиране е true.",
+ "cloud.pushpublic.warn": "True, ако потребителите трябва да бъдат предупредени, преди да бъде изпратена публична скица в облака. По подразбиране е true.",
+ "cloud.sketchSyncEnpoint": "Крайната точка, използвана за изпращане и изтегляне на скици от бекенда. По подразбиране той сочи към Arduino Cloud API.",
+ "auth.clientID": "OAuth2 клиентски идентификатор.",
+ "auth.domain": "OAuth2 домейнът.",
+ "auth.audience": "OAuth2 аудиторията.",
+ "auth.registerUri": "URI, използван за регистриране на нов потребител.",
+ "network": "Мрежа",
+ "sketchbook.location": "Местоположение на скицника",
+ "browse": "Прегледай",
+ "files.inside.sketches": "Показване на файлове в Sketches",
+ "editorFontSize": "Размер на шрифта на редактора",
+ "interfaceScale": "Мащаб на интерфейса",
+ "showVerbose": "Показване на подробен изход по време на",
+ "compilerWarnings": "Компилационни предупреждения",
+ "automatic": "Автоматично",
+ "compile": "компилиране",
+ "upload": "качване",
+ "verifyAfterUpload": "Потвърдете кода след качване",
+ "checkForUpdates": "Проверете за актуализации при стартиране",
+ "editorQuickSuggestions": "Бързи предложения на редактора",
+ "additionalManagerURLs": "Допълнителни URL адреси на мениджър на платки",
+ "noProxy": "Без прокси",
+ "manualProxy": "Ръчна конфигурация на прокси",
+ "newSketchbookLocation": "Изберете местоположение за новата скицниката",
+ "choose": "Изберете",
+ "enterAdditionalURLs": "Въведете допълнителни URL адреси, по един за всеки ред",
+ "unofficialBoardSupport": "Щракнете за списък с неофициално поддържаните URL адреси на платки",
+ "invalid.sketchbook.location": "Невалидно местоположение на скицника: {0}",
+ "invalid.editorFontSize": "Невалиден размер на шрифта на редактора. Трябва да е положително цяло число.",
+ "invalid.theme": "Невалидна тема."
+ },
+ "cloud": {
+ "signIn": "ВПИШИ СЕ",
+ "signOut": "Отписване",
+ "chooseSketchVisibility": "Изберете видимост на вашата скица:",
+ "privateVisibility": "Частен. Само вие можете да видите скицата.",
+ "publicVisibility": "Обществени. Всеки с връзката може да види скицата.",
+ "link": "Връзка:",
+ "embed": "Вграждане:",
+ "cloudSketchbook": "Облачен скицник",
+ "shareSketch": "Споделете скица",
+ "showHideRemoveSketchbook": "Показване/скриване на отдалечен скицник",
+ "pullSketch": "Издърпайте скица",
+ "openInCloudEditor": "Отворете в Cloud Editor",
+ "options": "Настроики...",
+ "share": "Сподели...",
+ "remote": "Отдалечен",
+ "emptySketchbook": "Вашият Скицник е празен",
+ "visitArduinoCloud": "Посетете Arduino Cloud, за да създадете облачни скици.",
+ "signInToCloud": "Влезте в Arduino Cloud",
+ "syncEditSketches": "Синхронизирайте и редактирайте на вашите Arduino облачни скици",
+ "learnMore": "Научете повече",
+ "continue": "Продължи",
+ "pushSketch": "Изпрати скица",
+ "pushSketchMsg": "Това е публична скица. Преди да я изпратите, уверете се, че всяка чувствителна информация е дефинирана във файловете arduino_secrets.h. Можете да направите скица частна от панела за споделяне.",
+ "pull": "Изтегли",
+ "pullSketchMsg": "Изтеглянето на тази скица от облака ще презапише нейната локална версия. Сигурен ли си, че искаш да продължиш?",
+ "donePulling": "Изтеглянето на „{0}“ приключи.",
+ "notYetPulled": "Не може да се изпрати към облака. Още не е изтеглен.",
+ "push": "Изпрати",
+ "pullFirst": "Първо трябва да дръпнете, за да можете да изпратите към облака.",
+ "donePushing": "Изпращането на „{0}“ приключи.",
+ "connected": "Свързано",
+ "offline": "Офлайн",
+ "profilePicture": "Снимка на профила"
+ },
+ "board": {
+ "installManually": "Инсталирай ръчно",
+ "installNow": "Ядрото „{0} {1}“ трябва да бъде инсталирано за текущо избраната платка „{2}“. Искате ли да го инсталирате сега?",
+ "configDialogTitle": "Изберете друга платка и порт",
+ "configDialog1": "Изберете както платка, така и порт, ако искате да качите скица.",
+ "configDialog2": "Ако изберете само платка, ще можете само да компилирате, но не и да качвате скицата си.",
+ "pleasePickBoard": "Моля, изберете платка, свързана към порта, който сте избрали.",
+ "showAllAvailablePorts": "Показва всички налични портове, когато е активиран",
+ "programmer": "Програматор",
+ "succesfullyInstalledPlatform": "Успешно инсталирана платформа {0}:{1}",
+ "succesfullyUninstalledPlatform": "Успешно деинсталирана платформа {0}:{1}",
+ "couldNotFindPreviouslySelected": "Не можа да се намери по-рано избрана платка „{0}“ в инсталираната платформа „{1}“. Моля, изберете отново ръчно платката, която искате да използвате. Искате ли да я изберете отново сега?",
+ "reselectLater": "Изберете отново по-късно",
+ "noneSelected": "Няма избрани платка.",
+ "noPortsSelected": "Няма избрани портове за платка: „{0}“.",
+ "noFQBN": "FQBN не е наличен за избраната платка „{0}“. Имате ли инсталирано съответното ядро?",
+ "openBoardsConfig": "Изберете друга платка и порт...",
+ "boardListItem": "{0} в {1}",
+ "selectBoardForInfo": "Моля, изберете платка, за да получите информация за нея.",
+ "platformMissing": "Платформата за избраната платка „{0}“ не е инсталирана.",
+ "selectPortForInfo": "Моля, изберете порт, за да получите информация за платката.",
+ "boardInfo": "Информация за платка",
+ "board": "Платка{0}",
+ "port": "Порт{0}",
+ "getBoardInfo": "Вземи информация за платката",
+ "inSketchbook": "(в Скицника)"
+ },
+ "boardsManager": "Мениджър на платки",
+ "about": {
+ "label": "Относно {0}",
+ "detail": "Версия: {0}\nДата: {1}{2}\nВерсия на CLI: {3}{4} [{5}]\n\n{6}"
+ },
+ "contributions": {
+ "addFile": "Добави файл",
+ "replaceTitle": "Замени",
+ "fileAdded": "Към скицата е добавен един файл."
+ },
+ "replaceMsg": "Да се замени ли съществуващата версия на {0}?",
+ "library": {
+ "addZip": "Добавяне на .ZIP библиотека...",
+ "zipLibrary": "Библиотека",
+ "overwriteExistingLibrary": "Искате ли да презапишете съществуващата библиотека?",
+ "successfullyInstalledZipLibrary": "Успешно инсталирана библиотека от {0} архив",
+ "namedLibraryAlreadyExists": "Библиотечна папка с име {0} вече съществува. Искате ли да я презапишете?",
+ "libraryAlreadyExists": "Библиотека вече съществува. Искате ли да я презапишете?",
+ "include": "Включи библиотека",
+ "manageLibraries": "Управление на библиотеки...",
+ "arduinoLibraries": "Arduino библиотеки",
+ "contributedLibraries": "Допринесени библиотеки",
+ "title": "Управител на библиотеки",
+ "needsOneDependency": "Библиотеката {0}:{1} се нуждае от друга зависимост, която в момента не е инсталирана:",
+ "needsMultipleDependencies": "Библиотеката {0}:{1} се нуждае от някои други зависимости, които в момента не са инсталирани:",
+ "installOneMissingDependency": "Искате ли да инсталирате липсващата зависимост?",
+ "installMissingDependencies": "Искате ли да инсталирате всички липсващи зависимости?",
+ "dependenciesForLibrary": "Зависимости за библиотека {0}:{1}",
+ "installAll": "Инсталирай всички",
+ "installOnly": "Инсталирайте само {0}",
+ "installedSuccessfully": "Успешно инсталирана библиотека {0}:{1}",
+ "uninstalledSuccessfully": "Успешно деинсталирана библиотека {0}:{1}"
+ },
+ "selectZip": "Изберете zip файл, съдържащ библиотеката, която искате да добавите",
+ "sketch": {
+ "archiveSketch": "Архивирай скица",
+ "saveSketchAs": "Запазете папката със скици като...",
+ "createdArchive": "Създаден е архив „{0}“.",
+ "new": "Нов",
+ "openRecent": "Отвори Скорошен",
+ "showFolder": "Показване на папка за скици",
+ "sketch": "Скица",
+ "moving": "Преместване",
+ "movingMsg": "Файлът „{0}“ трябва да бъде в папка на скица, наречена „{1}“.\nСъздай тази папка, премести файла и продължи?",
+ "cantOpen": "Папка с име „{0}“ вече съществува. Не може да се отвори скица.",
+ "saveFolderAs": "Запазете папката със скица като...",
+ "sketchbook": "Скицник",
+ "upload": "Качване",
+ "uploadUsingProgrammer": "Качване с помощта на програмист",
+ "userFieldsNotFoundError": "Не мога да намеря потребителски полета за свързаната платка",
+ "doneUploading": "Качването приключи.",
+ "configureAndUpload": "Конфигуриране и качване",
+ "verifyOrCompile": "Проверете/компилирайте",
+ "exportBinary": "Експортиране на компилиран двоичен файл",
+ "verify": "Потвърдете",
+ "doneCompiling": "Готово е компилирането.",
+ "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
+ "openSketchInNewWindow": "Open Sketch in New Window",
+ "openFolder": "Open Folder",
+ "titleLocalSketchbook": "Local Sketchbook",
+ "titleSketchbook": "Sketchbook",
+ "close": "Are you sure you want to close the sketch?"
+ },
+ "bootloader": {
+ "burnBootloader": "Burn Bootloader",
+ "doneBurningBootloader": "Done burning bootloader."
+ },
+ "editor": {
+ "copyForForum": "Copy for Forum (Markdown)",
+ "commentUncomment": "Comment/Uncomment",
+ "increaseIndent": "Increase Indent",
+ "decreaseIndent": "Decrease Indent",
+ "increaseFontSize": "Increase Font Size",
+ "decreaseFontSize": "Decrease Font Size",
+ "autoFormat": "Auto Format"
+ },
+ "examples": {
+ "menu": "Examples",
+ "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "builtInExamples": "Built-in examples",
+ "customLibrary": "Examples from Custom Libraries",
+ "for": "Examples for {0}",
+ "forAny": "Examples for any board"
+ },
+ "help": {
+ "search": "Search on Arduino.cc",
+ "keyword": "Type a keyword",
+ "gettingStarted": "Getting Started",
+ "environment": "Environment",
+ "troubleshooting": "Troubleshooting",
+ "reference": "Reference",
+ "findInReference": "Find in Reference",
+ "faq": "Frequently Asked Questions",
+ "visit": "Visit Arduino.cc"
+ },
+ "certificate": {
+ "uploadRootCertificates": "Upload SSL Root Certificates",
+ "openContext": "Open context",
+ "remove": "Remove",
+ "upload": "Upload",
+ "addURL": "Add URL to fetch SSL certificate",
+ "enterURL": "Enter URL",
+ "selectCertificateToUpload": "1. Select certificate to upload",
+ "addNew": "Add New",
+ "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
+ "uploadingCertificates": "Uploading certificates.",
+ "certificatesUploaded": "Certificates uploaded.",
+ "uploadFailed": "Upload failed. Please try again.",
+ "selectBoard": "Select a board...",
+ "boardAtPort": "{0} at {1}",
+ "noSupportedBoardConnected": "No supported board connected"
+ },
+ "firmware": {
+ "updater": "WiFi101 / WiFiNINA Firmware Updater",
+ "selectBoard": "Select Board",
+ "checkUpdates": "Check Updates",
+ "selectVersion": "Select firmware version",
+ "install": "Install",
+ "overwriteSketch": "Installation will overwrite the Sketch on the board.",
+ "installingFirmware": "Installing firmware.",
+ "successfullyInstalled": "Firmware succesfully installed.",
+ "failedInstall": "Installation failed. Please try again."
+ },
+ "dialog": {
+ "dontAskAgain": "Don't ask again"
+ },
+ "userFields": {
+ "cancel": "Cancel",
+ "upload": "Upload"
+ },
+ "serial": {
+ "toggleTimestamp": "Toggle Timestamp",
+ "autoscroll": "Autoscroll",
+ "timestamp": "Timestamp",
+ "noLineEndings": "No Line Ending",
+ "newLine": "New Line",
+ "carriageReturn": "Carriage Return",
+ "newLineCarriageReturn": "Both NL & CR",
+ "notConnected": "Not connected. Select a board and a port to connect automatically.",
+ "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
+ "connectionBusy": "Connection failed. Serial port is busy: {0}",
+ "disconnected": "Disconnected {0} from {1}.",
+ "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
+ "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
+ "reconnect": "Reconnecting {0} to {1} in {2} seconds..."
+ },
+ "component": {
+ "uninstall": "Uninstall",
+ "uninstallMsg": "Do you want to uninstall {0}?",
+ "by": "by",
+ "version": "Version {0}",
+ "moreInfo": "More info",
+ "install": "INSTALL",
+ "filterSearch": "Filter your search..."
+ },
+ "electron": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "unsavedChanges": "Any unsaved changes will not be saved."
+ },
+ "compile": {
+ "error": "Compilation error: {0}"
+ },
+ "upload": {
+ "error": "{0} error: {1}"
+ },
+ "burnBootloader": {
+ "error": "Error while burning the bootloader: {0}"
+ }
+ },
+ "theia": {
+ "core": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "offline": "Offline",
+ "daemonOffline": "CLI Daemon Offline",
+ "cannotConnectBackend": "Cannot connect to the backend.",
+ "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ },
+ "debug": {
+ "start": "Start...",
+ "typeNotSupported": "The debug session type \"{0}\" is not supported.",
+ "startError": "There was an error starting the debug session, check the logs for more details."
+ },
+ "editor": {
+ "unsavedTitle": "Unsaved – {0}"
+ },
+ "messages": {
+ "expand": "Expand",
+ "collapse": "Collapse"
+ },
+ "workspace": {
+ "fileNewName": "Name for new file",
+ "invalidFilename": "Invalid filename.",
+ "invalidExtension": ".{0} is not a valid extension",
+ "newFileName": "New name for file",
+ "deleteCurrentSketch": "Do you want to delete the current sketch?",
+ "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
+ }
+ },
+ "cloud": {
+ "GoToCloud": "GO TO CLOUD"
+ }
+}
diff --git a/i18n/de.json b/i18n/de.json
index d5dbe2deb..97790b888 100644
--- a/i18n/de.json
+++ b/i18n/de.json
@@ -1,334 +1,334 @@
{
"arduino": {
"common": {
- "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.",
- "noBoardSelected": "No board selected",
- "selectedOn": "on {0}",
- "notConnected": "[not connected]",
+ "offlineIndicator": "Anscheinend bist du offline. Ohne eine aktive Internetverbindung kann das Arduino CLI nicht die nötigen Ressourcen herunterladen, was zu Problemen führen kann. Bitte überprüfe deine Internetverbindung und starte das Programm neu. ",
+ "noBoardSelected": "Kein Board ausgewählt",
+ "selectedOn": "bei {0}",
+ "notConnected": "[keine Verbindung]",
"serialMonitor": "Serieller Monitor",
- "oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?",
- "later": "Later",
- "selectBoard": "Select Board",
- "unknown": "Unknown",
- "processing": "Processing",
- "saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
- "loseChanges": "If you don't save, your changes will be lost."
+ "oldFormat": "Der Sketch '{0}' verwendet noch das alte '.pde' Format. Möchtest du auf die neuere '.ino' Endung wechseln?",
+ "later": "später",
+ "selectBoard": "Board wählen",
+ "unknown": "unbekannt",
+ "processing": "Verarbeiten",
+ "saveChangesToSketch": "Änderungen zu diesem Sketch vor dem Schließen sichern?",
+ "loseChanges": "Wenn du nicht sicherst, werden deine Änderungen gelöscht."
},
"menu": {
"sketch": "Sketch",
"tools": "Werkzeuge"
},
"debug": {
- "optimizeForDebugging": "Optimize for Debugging",
+ "optimizeForDebugging": "Für Debugging optimieren",
"debugWithMessage": "Debug - {0}",
- "noPlatformInstalledFor": "Platform is not installed for '{0}'",
- "debuggingNotSupported": "Debugging is not supported by '{0}'"
+ "noPlatformInstalledFor": "Die Platform für '{0}' ist nicht instaliert.",
+ "debuggingNotSupported": "'{0}' unterstützt kein Debuggen"
},
"preferences": {
- "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
- "compile.verbose": "True for verbose compile output. False by default",
- "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
- "upload.verbose": "True for verbose upload output. False by default.",
- "window.autoScale": "True if the user interface automatically scales with the font size.",
- "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.",
- "ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
- "board.certificates": "List of certificates that can be uploaded to boards",
- "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
- "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
- "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
- "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
- "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
- "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
- "auth.clientID": "The OAuth2 client ID.",
- "auth.domain": "The OAuth2 domain.",
- "auth.audience": "The OAuth2 audience.",
- "auth.registerUri": "The URI used to register a new user.",
+ "language.log": "Wahr, wenn der Arduino Language Server Logfiles in den Sketch-Ordner schreiben soll. Sonst falsch. Standardeinstellung ist falsch.\n ",
+ "compile.verbose": "Wahr für ausführliche Compilerausgaben. Standardmäßig Falsch",
+ "compile.warnings": "Einstellung des Warnlevels für den GCC. Standardeinstellung ist 'None'.",
+ "upload.verbose": "Wahr für ausführliche Ausgaben während dem Hochladen. Standardmäßig Falsch.",
+ "window.autoScale": "Ist wahr, wenn die Benutzeroberfläche automatisch mit der Schriftgröße skaliert wird.",
+ "window.zoomLevel": "Stelle die Zoomstufe des Fensters ein. Der Standardwert ist 0, jede Vergrößerung (z.B.: 1) oder Verringerung (z.B.: -1) um eins steht für 20% Vergrößerung bzw. Verkleinerung des Fensters. Du kannst auch Kommazahlen eingeben, um die Zoomstufe feiner einzustellen.\n ",
+ "ide.autoUpdate": "Wahr, um automatisch auf Updates zu überprüfen. Die IDE wird automatisch regelmäßig auf Updates prüfen.",
+ "board.certificates": "Liste der Zertifikate, welche zu den Boards hochgeladen werden können.",
+ "sketchbook.showAllFiles": "Wahr, um alle Dateien im Sketch anzuzeigen. Standardmäßig Falsch.",
+ "cloud.enabled": "Wahr, wenn die Sketch-Syncfunctionen aktiv sind. Standardeinstellung ist wahr.",
+ "cloud.pull.warn": "Wahr, wenn Benutzer vor dem Herunterladen eines Sketches aus der Cloud gewarnt werden sollen. Standardmäßig Wahr.",
+ "cloud.push.warn": "Wahr, wenn Benutzer vor dem Hochladen eines Cloud-Sketches gewarnt werden sollen. Standardmäßig Wahr.",
+ "cloud.pushpublic.warn": "Wahr, wenn Benutzer vor dem Hochladen eines öffentlichen Sketches in die Cloud gewarnt werden sollen. Standardmäßig Wahr.",
+ "cloud.sketchSyncEnpoint": "Der Endpunkt, um Sketches zu/von einem Backend zu laden. Standardeinstellung ist die Arduino Cloud API.",
+ "auth.clientID": "Die OAuth2 client ID.",
+ "auth.domain": "Die OAuth2 Domain.",
+ "auth.audience": "Das The OAuth2 Audience.",
+ "auth.registerUri": "Das URI hat einen neuen Benutzer registriert.",
"network": "Netzwerk",
- "sketchbook.location": "Sketchbook location",
+ "sketchbook.location": "Dateipfad des Sketchbooks",
"browse": "Durchsuchen",
- "files.inside.sketches": "Show files inside Sketches",
- "editorFontSize": "Editor font size",
- "interfaceScale": "Interface scale",
- "showVerbose": "Show verbose output during",
- "compilerWarnings": "Compiler warnings",
+ "files.inside.sketches": "Dateien im Sketch zeigen",
+ "editorFontSize": "Editor Schriftgröße",
+ "interfaceScale": "Fenster Skalierung",
+ "showVerbose": "Debug Informationen während",
+ "compilerWarnings": "Warnungen des Übersetzers",
"automatic": "Automatisch",
- "compile": "compile",
- "upload": "upload",
- "verifyAfterUpload": "Verify code after upload",
+ "compile": "Kompilieren",
+ "upload": "Hochladen",
+ "verifyAfterUpload": "Code nach Hochladen überprüfen ",
"checkForUpdates": "Beim Start nach Updates suchen",
- "editorQuickSuggestions": "Editor Quick Suggestions",
+ "editorQuickSuggestions": "Schnelle Editor Vorschläge",
"additionalManagerURLs": "Zusätzliche Boardverwalter-URLs",
- "noProxy": "No proxy",
- "manualProxy": "Manual proxy configuration",
- "newSketchbookLocation": "Select new sketchbook location",
- "choose": "Choose",
- "enterAdditionalURLs": "Enter additional URLs, one for each row",
- "unofficialBoardSupport": "Click for a list of unofficial board support URLs",
- "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
- "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
- "invalid.theme": "Invalid theme."
+ "noProxy": "Kein Proxy",
+ "manualProxy": "Manuelle Proxy Einstellung",
+ "newSketchbookLocation": "Wähle einen neuen Ort für das Sketchbook ",
+ "choose": "Wähle",
+ "enterAdditionalURLs": "Füge zusätzliche URLs hinzu, jede Reihe einzeln",
+ "unofficialBoardSupport": "Klicke hier für eine Liste von inoffiziell unterstützten Boards",
+ "invalid.sketchbook.location": "Ungültiger Sketchbook Speicherort: {0}",
+ "invalid.editorFontSize": "Ungültige Editor Schriftgröße. Sie muss eine positive, ganze Zahl sein.",
+ "invalid.theme": "Ungültiges Erscheinungsbild"
},
"cloud": {
- "signIn": "SIGN IN",
- "signOut": "Sign Out",
- "chooseSketchVisibility": "Choose visibility of your Sketch:",
- "privateVisibility": "Private. Only you can view the Sketch.",
- "publicVisibility": "Public. Anyone with the link can view the Sketch.",
+ "signIn": "Anmelden",
+ "signOut": "Abmelden",
+ "chooseSketchVisibility": "Wähle die Sichtbarkeit deines Sketches:",
+ "privateVisibility": "Private. Nur du siehst diesen Sketch.",
+ "publicVisibility": "Public. Jeder kann mit diesen Link den Sketch sehen.",
"link": "Link:",
- "embed": "Embed:",
+ "embed": "Einbetten:",
"cloudSketchbook": "Cloud Sketchbook",
- "shareSketch": "Share Sketch",
- "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
+ "shareSketch": "Sketch teilen",
+ "showHideRemoveSketchbook": "Zeige/Verstecke Remote Sketchbook",
"pullSketch": "Pull Sketch",
- "openInCloudEditor": "Open in Cloud Editor",
- "options": "Options...",
- "share": "Share...",
+ "openInCloudEditor": "Im Cloud Editor öffnen",
+ "options": "Optionen....",
+ "share": "Teilen....",
"remote": "Remote",
- "emptySketchbook": "Your Sketchbook is empty",
- "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
- "signInToCloud": "Sign in to Arduino Cloud",
- "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
- "learnMore": "Learn more",
- "continue": "Continue",
+ "emptySketchbook": "Dein Sketchbook ist leer",
+ "visitArduinoCloud": "Besuche Arduino Cloud um Cloud Sketche zu erstellen.",
+ "signInToCloud": "Anmelden zur Arduino Cloud",
+ "syncEditSketches": "Synchronisiere und editiere deine Arduino Cloud Sketches.",
+ "learnMore": "Mehr erfahren",
+ "continue": "Fortfahren",
"pushSketch": "Push Sketch",
- "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
+ "pushSketchMsg": "Das ist ein öffentliches Sketch. Vor dem Pushen solltest du überprüfen, ob alle sensiblen Informationen in arduino_secrets.h definiert sind. Du kannst einen Sketch mit dem Teilen-Feld privat machen.",
"pull": "Pull",
- "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
- "donePulling": "Done pulling ‘{0}’.",
- "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
+ "pullSketchMsg": "Wenn du diesen Sketch aus der Cloud lädst, wird die lokale Version überschrieben. Möchtest du fortfahren?",
+ "donePulling": "Herunterladen von '{0}' erfolgreich.",
+ "notYetPulled": "Kann nicht in die Cloud geschoben werden. Es ist noch nicht heruntergeladen.",
"push": "Push",
- "pullFirst": "You have to pull first to be able to push to the Cloud.",
- "donePushing": "Done pushing ‘{0}’.",
- "connected": "Connected",
+ "pullFirst": "Du musst zuerst herunterladen, damit du in die Cloud schieben kannst.",
+ "donePushing": "Hochladen von '{0}' erfolgreich.",
+ "connected": "Verbunden",
"offline": "Offline",
- "profilePicture": "Profile picture"
+ "profilePicture": "Profilbild"
},
"board": {
- "installManually": "Install Manually",
- "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
- "configDialogTitle": "Select Other Board & Port",
- "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
- "configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
- "pleasePickBoard": "Please pick a board connected to the port you have selected.",
- "showAllAvailablePorts": "Shows all available ports when enabled",
+ "installManually": "Manuell installieren",
+ "installNow": "Der \"{0} {1}\" Core muss für das ausgewählte \"{2}\" Board installiert werden. Jetzt installieren?",
+ "configDialogTitle": "Andere Bords und Ports wählen",
+ "configDialog1": "Wählen Sie ein Board und einen Port, wenn Sie den Sketch hochladen möchten.",
+ "configDialog2": "Wenn Sie nur ein Board auswählen, werden Sie den Sketch nur kompilieren können, jedoch nicht hochladen.",
+ "pleasePickBoard": "Bitte wählen Sie das Board, welches am ausgewählten Port angeschlossen ist.",
+ "showAllAvailablePorts": "Zeige alle verfügbaren Ports, wenn aktiviert.",
"programmer": "Programmer",
- "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
- "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}",
- "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
- "reselectLater": "Reselect later",
- "noneSelected": "No boards selected.",
- "noPortsSelected": "No ports selected for board: '{0}'.",
- "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
- "openBoardsConfig": "Select other board and port…",
- "boardListItem": "{0} at {1}",
- "selectBoardForInfo": "Please select a board to obtain board info.",
- "platformMissing": "The platform for the selected '{0}' board is not installed.",
- "selectPortForInfo": "Please select a port to obtain board info.",
- "boardInfo": "Boardinformationen",
+ "succesfullyInstalledPlatform": "Plattform erfolgreich installiert {0}:{1}",
+ "succesfullyUninstalledPlatform": "Plattform erfolgreich deinstalliert {0}:{1}",
+ "couldNotFindPreviouslySelected": "Zuvor gewähltes Board '{0}' wurde nicht in der installierten Plaftform '{1}' gefunden. Bitte Board erneut auswählen. Jetzt auswählen?",
+ "reselectLater": "Später auswählen",
+ "noneSelected": "Kein Board ausgewählt.",
+ "noPortsSelected": "Kein Port für das Board : '{0}' ausgewählt.",
+ "noFQBN": "Der FQBN ist für das gewählte Board \"{0}\" nicht verfügbar. Wurde der zugehörige Core installiert?",
+ "openBoardsConfig": "Wähle einen anderes Board und einen anderen Port...",
+ "boardListItem": "{0} bei {1}",
+ "selectBoardForInfo": "Wähle ein Board für die Board-Informationen.",
+ "platformMissing": "Die Plattform für das gewählte '{0}' Board ist nicht installiert.",
+ "selectPortForInfo": "Wähle ein Port, um Informationen über das Board zu erhalten.",
+ "boardInfo": "Board-Informationen",
"board": "Board{0}",
"port": "Port{0}",
- "getBoardInfo": "Get Board Info",
- "inSketchbook": " (in Sketchbook)"
+ "getBoardInfo": "Board-Informationen abrufen",
+ "inSketchbook": "(im Sketchbook)"
},
- "boardsManager": "Boardverwalter",
+ "boardsManager": "Board-Verwaltung",
"about": {
- "label": "About {0}",
- "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
+ "label": "Über {0}",
+ "detail": "Version: {0}\nDatum: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
},
"contributions": {
"addFile": "Datei hinzufügen...",
- "replaceTitle": "Replace",
- "fileAdded": "One file added to the sketch."
+ "replaceTitle": "Ersetzen",
+ "fileAdded": "Eine Datei wurde zum Sketch hinzugefügt."
},
- "replaceMsg": "Replace the existing version of {0}?",
+ "replaceMsg": "Existierende Version von {0} ersetzen?",
"library": {
"addZip": ".ZIP-Bibliothek hinzufügen...",
- "zipLibrary": "Library",
- "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
- "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
- "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
- "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
- "include": "Include Library",
- "manageLibraries": "Manage Libraries...",
- "arduinoLibraries": "Arduino libraries",
- "contributedLibraries": "Contributed libraries",
- "title": "Library Manager",
- "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
- "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
- "installOneMissingDependency": "Would you like to install the missing dependency?",
- "installMissingDependencies": "Would you like to install all the missing dependencies?",
- "dependenciesForLibrary": "Dependencies for library {0}:{1}",
- "installAll": "Install all",
- "installOnly": "Install {0} only",
- "installedSuccessfully": "Successfully installed library {0}:{1}",
- "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}"
+ "zipLibrary": "Bibliothek",
+ "overwriteExistingLibrary": "Möchtest du die existierende Bibliothek überschreiben?",
+ "successfullyInstalledZipLibrary": "Bibliothek erfolgreich vom {0} Archiv installiert",
+ "namedLibraryAlreadyExists": "Der Bibliothek-Ordner '{0}' existiert bereits. Überschreiben?",
+ "libraryAlreadyExists": "Eine Bibliothek existiert bereits. Möchten sie diese überschreiben?",
+ "include": "Bibliothek einbinden",
+ "manageLibraries": "Bibliotheken verwalten...",
+ "arduinoLibraries": "Arduino Bibliotheken",
+ "contributedLibraries": "Bibliotheken, zu denen beigetragen wurde",
+ "title": "Bibliotheksverwalter",
+ "needsOneDependency": "Die Bibliothek {0}:{1} benötigt eine andere Abhängigkeit, welche derzeit nicht installiert ist:",
+ "needsMultipleDependencies": "Die Bibliothek {0}:{1} benötigt ein paar andere Abhängigkeiten, die derzeit nicht installiert sind:",
+ "installOneMissingDependency": "Möchten Sie die fehlende Ressource installieren?",
+ "installMissingDependencies": "Möchten Sie alle fehlenden Ressourcen installieren?",
+ "dependenciesForLibrary": "Abhängigkeiten für die Bibliothek {0}:{1}",
+ "installAll": "Alle installieren",
+ "installOnly": "Nur {0} installieren",
+ "installedSuccessfully": "Bibliothek {0}:{1} erfolgreich installiert",
+ "uninstalledSuccessfully": "Bibliothek {0}:{1} erfolgreich deinstalliert"
},
- "selectZip": "Select a zip file containing the library you'd like to add",
+ "selectZip": "Wähle die ZIP-Datei, welche die hinzuzufügende Bibliothek enthält",
"sketch": {
"archiveSketch": "Sketch archivieren",
- "saveSketchAs": "Save sketch folder as...",
- "createdArchive": "Created archive '{0}'.",
- "new": "New",
- "openRecent": "Open Recent",
- "showFolder": "Show Sketch Folder",
+ "saveSketchAs": "Sketch Ordner speichern als...",
+ "createdArchive": "Archiv '{0}' erstellt.",
+ "new": "Neu",
+ "openRecent": "Zuletzt geöffnet",
+ "showFolder": "Zeige Sketch Ordner",
"sketch": "Sketch",
- "moving": "Moving",
- "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
+ "moving": "Übertragen...",
+ "movingMsg": "Die Datei \"{0}\" muss sich in einem Sketch Ordner \"{1}\" befinden.\nDiesen Ordner erstellen, Datei verschieben und fortfahren?",
"cantOpen": "Ein Ordner mit dem Namen \"{0}\" ist bereits vorhanden. Der Sketch kann nicht geöffnet werden.",
- "saveFolderAs": "Save sketch folder as...",
+ "saveFolderAs": "Sketch Ordner speichern als...",
"sketchbook": "Sketchbook",
"upload": "Hochladen",
- "uploadUsingProgrammer": "Upload Using Programmer",
- "userFieldsNotFoundError": "Can't find user fields for connected board",
- "doneUploading": "Done uploading.",
- "configureAndUpload": "Configure And Upload",
- "verifyOrCompile": "Verify/Compile",
- "exportBinary": "Export Compiled Binary",
- "verify": "Verify",
- "doneCompiling": "Done compiling.",
- "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
- "openSketchInNewWindow": "Open Sketch in New Window",
- "openFolder": "Open Folder",
- "titleLocalSketchbook": "Local Sketchbook",
+ "uploadUsingProgrammer": "Mit Programmer hochladen",
+ "userFieldsNotFoundError": "User Fields für das angeschlossene Board nicht gefunden",
+ "doneUploading": "Hochladen erfolgreich! ",
+ "configureAndUpload": "Konfigurieren und hochladen",
+ "verifyOrCompile": "Überprüfen/Kompilieren",
+ "exportBinary": "Kompilierte Binärdatei exportieren",
+ "verify": "Überprüfen",
+ "doneCompiling": "Kompilieren erfolgreich!",
+ "couldNotConnectToSerial": "Verbindung zum seriellen Port fehlgeschlagen. {0}",
+ "openSketchInNewWindow": "Sketch in neuen Fenster öffnen",
+ "openFolder": "Ordner öffnen",
+ "titleLocalSketchbook": "Lokales Sketchbook",
"titleSketchbook": "Sketchbook",
- "close": "Are you sure you want to close the sketch?"
+ "close": "Sind Sie sicher, dass Sie diesen Sketch schließen möchten?"
},
"bootloader": {
"burnBootloader": "Bootloader brennen",
- "doneBurningBootloader": "Done burning bootloader."
+ "doneBurningBootloader": "Bootloader erfolgreich gebrannt."
},
"editor": {
"copyForForum": "Für Forum kopieren (Markdown)",
"commentUncomment": "Kommentieren/Kommentar aufheben",
- "increaseIndent": "Increase Indent",
- "decreaseIndent": "Decrease Indent",
- "increaseFontSize": "Increase Font Size",
- "decreaseFontSize": "Schriftgröße verringern",
- "autoFormat": "Automatische Formatierung"
+ "increaseIndent": "Einrückung erweitern",
+ "decreaseIndent": "Einrückung verringern ",
+ "increaseFontSize": "Schriftgröße vergrößern ",
+ "decreaseFontSize": "Schrift verkleinern",
+ "autoFormat": "automatisch Formatieren"
},
"examples": {
- "menu": "Examples",
- "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "menu": "Beispiele",
+ "couldNotInitializeExamples": "Mitgelieferte Beispiele konnten nicht initialisiert werden",
"builtInExamples": "Mitgelieferte Beispiele",
- "customLibrary": "Examples from Custom Libraries",
- "for": "Examples for {0}",
- "forAny": "Examples for any board"
+ "customLibrary": "Beispiele aus eigenen Bibliotheken",
+ "for": "Beispiele für {0}",
+ "forAny": "Beispiele für jedes Board"
},
"help": {
- "search": "Search on Arduino.cc",
- "keyword": "Type a keyword",
- "gettingStarted": "Getting Started",
- "environment": "Environment",
- "troubleshooting": "Troubleshooting",
- "reference": "Reference",
- "findInReference": "Find in Reference",
- "faq": "Frequently Asked Questions",
- "visit": "Visit Arduino.cc"
+ "search": "Suche auf Arduino.cc",
+ "keyword": "Schlagwort eingeben",
+ "gettingStarted": "Loslegen...",
+ "environment": "Umgebung",
+ "troubleshooting": "Fehlersuche",
+ "reference": "Referenz",
+ "findInReference": "Referenzsuche",
+ "faq": "Häufig gestellte Fragen",
+ "visit": "Besuche Arduino.cc"
},
"certificate": {
- "uploadRootCertificates": "Upload SSL Root Certificates",
- "openContext": "Open context",
- "remove": "Remove",
+ "uploadRootCertificates": "SSL Root Zertifikat hochladen",
+ "openContext": "Kontext öffnen",
+ "remove": "entfernen",
"upload": "Hochladen",
- "addURL": "Add URL to fetch SSL certificate",
- "enterURL": "Enter URL",
- "selectCertificateToUpload": "1. Select certificate to upload",
- "addNew": "Add New",
- "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
- "uploadingCertificates": "Uploading certificates.",
- "certificatesUploaded": "Certificates uploaded.",
- "uploadFailed": "Upload failed. Please try again.",
- "selectBoard": "Select a board...",
- "boardAtPort": "{0} at {1}",
- "noSupportedBoardConnected": "No supported board connected"
+ "addURL": "URL hinzufügen, um das SSL-Zertifikat abzurufen",
+ "enterURL": "URL eingeben",
+ "selectCertificateToUpload": "1. Zertifikat zum hochladen auswählen",
+ "addNew": "Neu hinzufügen",
+ "selectDestinationBoardToUpload": "2. Zielboard wählen und Zertifikat hochladen",
+ "uploadingCertificates": "Zertifikate hochladen...",
+ "certificatesUploaded": "Die Zertifikate wurden erfolgreich hochgeladen.",
+ "uploadFailed": "Hochladen fehlgeschlagen. Bitte versuchen Sie es erneut.",
+ "selectBoard": "Wähle ein Board...",
+ "boardAtPort": "{0} bei {1}",
+ "noSupportedBoardConnected": "Kein unterstütztes Board angeschlossen"
},
"firmware": {
- "updater": "WiFi101 / WiFiNINA Firmware Updater",
- "selectBoard": "Select Board",
- "checkUpdates": "Check Updates",
- "selectVersion": "Select firmware version",
+ "updater": "WiFi101 / WiFiNINA Firmware Aktualisierer",
+ "selectBoard": "Board auswählen",
+ "checkUpdates": "Nach Updates Suchen",
+ "selectVersion": "Firmware Version wählen",
"install": "Installieren",
- "overwriteSketch": "Installation will overwrite the Sketch on the board.",
- "installingFirmware": "Installing firmware.",
- "successfullyInstalled": "Firmware succesfully installed.",
- "failedInstall": "Installation failed. Please try again."
+ "overwriteSketch": "Die Installation wird den Sketch auf dem Board überschreiben.",
+ "installingFirmware": "Firmware wird installiert.",
+ "successfullyInstalled": "Firmware wurde erfolgreich installiert.",
+ "failedInstall": "Installation fehlgeschlagen. Bitte versuche es erneut "
},
"dialog": {
- "dontAskAgain": "Don't ask again"
+ "dontAskAgain": "Nicht noch einmal fragen"
},
"userFields": {
- "cancel": "Cancel",
+ "cancel": "abbrechen",
"upload": "Hochladen"
},
"serial": {
- "toggleTimestamp": "Toggle Timestamp",
- "autoscroll": "Autoscroll",
- "timestamp": "Timestamp",
+ "toggleTimestamp": "Zeitstempel an/aus",
+ "autoscroll": "Automatisch scrollen",
+ "timestamp": "Zeitstempel",
"noLineEndings": "Kein Zeilenende",
"newLine": "Neue Zeile",
- "carriageReturn": "Zeilenumbruch (CR)",
+ "carriageReturn": "Zeilenumbruch",
"newLineCarriageReturn": "Sowohl NL als auch CR",
- "notConnected": "Not connected. Select a board and a port to connect automatically.",
- "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
- "connectionBusy": "Connection failed. Serial port is busy: {0}",
- "disconnected": "Disconnected {0} from {1}.",
- "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
- "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
- "reconnect": "Reconnecting {0} to {1} in {2} seconds..."
+ "notConnected": "Nicht verbunden. Wählen Sie ein Board und einen Port, um automatisch zu verbinden.",
+ "message": "Nachricht ({0} + Enter, um Nachricht an '{1}' auf '{2}' zu senden",
+ "connectionBusy": "Verbindung fehlgeschlagen. Serieller port ist belegt: {0}",
+ "disconnected": "{0} von {1} getrennt.",
+ "unexpectedError": "100%match\nUnerwarteter Fehler. {0} wird am Port {1} erneut verbunden.",
+ "failedReconnect": "Verbindung von {0} zum seriellen Port nach 10 Versuchen abgebrochen. Der {1} serielle Port ist belegt..",
+ "reconnect": "Verbinde {0} erneut zu {1} in {2} Sekunden..."
},
"component": {
- "uninstall": "Uninstall",
- "uninstallMsg": "Do you want to uninstall {0}?",
- "by": "by",
+ "uninstall": "deinstalieren",
+ "uninstallMsg": "Möchten Sie {0} deinstallieren?",
+ "by": "von",
"version": "Version {0}",
- "moreInfo": "More info",
+ "moreInfo": "Mehr Information",
"install": "Installieren",
- "filterSearch": "Grenzen Sie Ihre Suche ein..."
+ "filterSearch": "Filtern Sie Ihre Suche..."
},
"electron": {
- "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
- "unsavedChanges": "Any unsaved changes will not be saved."
+ "couldNotSave": "Der Sketch konnte nicht gesichert werden. Bitte kopiere deine ungesicherte Arbeit in deinen bevorzugten Texteditor und starte die IDE neu.",
+ "unsavedChanges": "Alle ungesicherten Änderung werden nicht gespeichert."
},
"compile": {
- "error": "Compilation error: {0}"
+ "error": "Fehler beim kompilieren: {0}"
},
"upload": {
- "error": "{0} error: {1}"
+ "error": "{0} Fehler: {1}"
},
"burnBootloader": {
- "error": "Error while burning the bootloader: {0}"
+ "error": "Fehler beim Brennen des Bootloaders: {0}"
}
},
"theia": {
"core": {
- "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "couldNotSave": "Der Sketch konnte nicht gesichert werden. Bitte kopiere deine ungesicherte Arbeit in deinen bevorzugten Texteditor und starte die IDE neu.",
"offline": "Offline",
"daemonOffline": "CLI Daemon Offline",
- "cannotConnectBackend": "Cannot connect to the backend.",
- "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ "cannotConnectBackend": "Keine Verbindung zum Backend.",
+ "cannotConnectDaemon": "Keine Verbindung zum CLI Daemon."
},
"debug": {
"start": "Start...",
- "typeNotSupported": "The debug session type \"{0}\" is not supported.",
- "startError": "There was an error starting the debug session, check the logs for more details."
+ "typeNotSupported": "Die Debug Session vom Typ \"{0}\" wird nicht unterstützt.",
+ "startError": "Es gab einen Fehler beim Start der Debug-Session. Überprüfe die Logs für mehr Informationen."
},
"editor": {
- "unsavedTitle": "Unsaved – {0}"
+ "unsavedTitle": "Nicht gespeichert – {0}"
},
"messages": {
- "expand": "Expand",
- "collapse": "Collapse"
+ "expand": "Ausklappen",
+ "collapse": "Einklappen"
},
"workspace": {
- "fileNewName": "Name for new file",
- "invalidFilename": "Invalid filename.",
+ "fileNewName": "Name für die neue Datei",
+ "invalidFilename": "Ungültiger Dateiname. ",
"invalidExtension": "\".{0}\" ist keine gültige Dateierweiterung.",
- "newFileName": "New name for file",
- "deleteCurrentSketch": "Do you want to delete the current sketch?",
- "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
+ "newFileName": "Neuer Name für die Datei",
+ "deleteCurrentSketch": "Möchtest du den aktuellen Sketch löschen?",
+ "sketchDirectoryError": "Fehler beim Erstellen des Sketch-Ordners. Mehr Informationen siehe Log. Die Anwendung wird wahrscheinlich nicht wie erwartet funktionieren."
}
},
"cloud": {
- "GoToCloud": "GO TO CLOUD"
+ "GoToCloud": "Zur Cloud gehen"
}
}
diff --git a/i18n/el.json b/i18n/el.json
new file mode 100644
index 000000000..a27cb47e6
--- /dev/null
+++ b/i18n/el.json
@@ -0,0 +1,334 @@
+{
+ "arduino": {
+ "common": {
+ "offlineIndicator": "Φαίνεται πως είστε εκτός σύνδεσης. Χωρίς σύνδεση στο Internet, το Arduino CLI ίσως να μη μπορεί να κάνει λήψη των απαιτούμενων πόρων και να υπάρξει δυσλειτουργία. Παρακαλώ συνδεθείτε στο Internet και επανεκκινήστε την εφαρμογή.",
+ "noBoardSelected": "Δεν έχει επιλεχθεί πλακέτα",
+ "selectedOn": "στο {0}",
+ "notConnected": "[μη συνδεμένο]",
+ "serialMonitor": "Παρακολούθηση Σειριακής",
+ "oldFormat": "Το '{0}' χρησιμοποιεί ακόμα το παλιό '.pde' στυλ. Θέλετε να αλλάξετε στην νέα κατάληξη '.ino';",
+ "later": "Αργότερα",
+ "selectBoard": "Επιλογή Πλακέτας",
+ "unknown": "Άγνωστο",
+ "processing": "Επεξεργασία",
+ "saveChangesToSketch": "Θέτε να αποθηκεύσετε τις αλλαγές σε αυτο το σχέδιο πριν κλείσετε; ",
+ "loseChanges": "Αν δεν αποθηκεύσετε, οι αλλαγές σας θα χαθούν."
+ },
+ "menu": {
+ "sketch": "Σχέδιο",
+ "tools": "Εργαλεία"
+ },
+ "debug": {
+ "optimizeForDebugging": "Βελτιστοποίηση για Αποσφαλμάτωση",
+ "debugWithMessage": "Αποσφαλμάτωση - {0}",
+ "noPlatformInstalledFor": "Δεν έχει εγκατασταθεί πλατφόρμα για '{0}'",
+ "debuggingNotSupported": "Δεν υποστιρίζεται αποσφαλμάτωση από '{0}'"
+ },
+ "preferences": {
+ "language.log": "Αληθές αν ο Arduino Language Server πρέπει να παράξει αρχεία κατάστασης στον φάκελο σχεδίου. Διαφορετικά, ψευδές. Είναι ψευδές απο προεπιλογή.",
+ "compile.verbose": "Αληθές για λεπτομερή έξοδο μεταγλώττισης. Ψευδές απο προεπιλογή.",
+ "compile.warnings": "Λέει στο gcc ποιο επίπεδο προειδοποίησης να χρησιμοποιήσει. Είναι 'None' απο προεπιλογή",
+ "upload.verbose": "Αληθές για λεπτομερή έξοδο ανεβάσματος. Ψευδές απο προεπιλογή.",
+ "window.autoScale": "Αληθές αν η διεπαφή χρήστη κλιμακλωνεται αυτόματα μαζί με το μέγεθος γραμματοσειράς.",
+ "window.zoomLevel": "Ρύθμιση του επιπέδου μεγέθυνσης του παραθύρου. Το αρχικό μέγεθος ειναι 0 και κάθε αύξηση (π.χ. 1) ή μείωση (π.χ. -1) αναπαριστά μεγέθυνση 20% μεγαλύτερη ή μικρότερη. Μπορούν να εισαχθούν και δεκαδικά για προσαρμογή της μεγέθυνσης με μεγαλύτερη λεπτομέρεια.",
+ "ide.autoUpdate": "Αληθές για ενεργοποίηση αυτομάτων ελέγχων ενημερώσεων. Το IDE θα ελέγχει για ενημερώσεις αυτόματα και τακτικά.",
+ "board.certificates": "Λίστα πιστοποιητικών που μπορούν να ανέβουν σε πλακέτες",
+ "sketchbook.showAllFiles": "Αληθές για εμφάνιση όλων των αρχείων σχεδίου μεσα στο σχέδιο. Είναι ψευδές απο προεπιλογή.",
+ "cloud.enabled": "Αληθές αν οι λειτουγίες συγχονισμού σχεδίου είναι ενεργοποιημένες. Προεπιλογή ως αληθές.",
+ "cloud.pull.warn": "Αληθές αν οι χρήστες πρέπει προειδοποιηθούν πριν τραβηχτεί ενα σχέδιο σύννεφου. Προεπιλογή ως αληθές.",
+ "cloud.push.warn": "Αληθές αν οι χρήστες πρέπει προειδοποιηθούν πριν σπρωχθεί ενα σχέδιο σύννεφου. Προεπιλογή ως αληθές. ",
+ "cloud.pushpublic.warn": "Αληθές αν οι χρήστες πρέπει προειδοποιηθούν πριν σπρωχθεί ενα δημόσιο σχέδιο σύννεφου. Προεπιλογή ως αληθές. ",
+ "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
+ "auth.clientID": "The OAuth2 client ID.",
+ "auth.domain": "The OAuth2 domain.",
+ "auth.audience": "The OAuth2 audience.",
+ "auth.registerUri": "The URI used to register a new user.",
+ "network": "Δίκτυο",
+ "sketchbook.location": "Τοποθεσία σχεδίων",
+ "browse": "Περιήγηση",
+ "files.inside.sketches": "Εμφάνιση αρχείων μέσα σε Σχέδια",
+ "editorFontSize": "Μέγεθος γραμματοσειράς Συντάκτη",
+ "interfaceScale": "Κλίμακα διεπαφής",
+ "showVerbose": "Εμφάνιση λεπτομερούς εξόδου κατά τη διάρκεια",
+ "compilerWarnings": "Προειδοποιήσεις μεταγγλωτιστή",
+ "automatic": "Αυτόματο",
+ "compile": "μεταγλώττιση",
+ "upload": "ανέβασμα",
+ "verifyAfterUpload": "Verify code after upload",
+ "checkForUpdates": "Check for updates on startup",
+ "editorQuickSuggestions": "Editor Quick Suggestions",
+ "additionalManagerURLs": "Additional Boards Manager URLs",
+ "noProxy": "No proxy",
+ "manualProxy": "Manual proxy configuration",
+ "newSketchbookLocation": "Select new sketchbook location",
+ "choose": "Choose",
+ "enterAdditionalURLs": "Enter additional URLs, one for each row",
+ "unofficialBoardSupport": "Click for a list of unofficial board support URLs",
+ "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
+ "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
+ "invalid.theme": "Invalid theme."
+ },
+ "cloud": {
+ "signIn": "SIGN IN",
+ "signOut": "Sign Out",
+ "chooseSketchVisibility": "Choose visibility of your Sketch:",
+ "privateVisibility": "Private. Only you can view the Sketch.",
+ "publicVisibility": "Public. Anyone with the link can view the Sketch.",
+ "link": "Link:",
+ "embed": "Embed:",
+ "cloudSketchbook": "Cloud Sketchbook",
+ "shareSketch": "Share Sketch",
+ "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
+ "pullSketch": "Pull Sketch",
+ "openInCloudEditor": "Open in Cloud Editor",
+ "options": "Options...",
+ "share": "Share...",
+ "remote": "Remote",
+ "emptySketchbook": "Your Sketchbook is empty",
+ "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
+ "signInToCloud": "Sign in to Arduino Cloud",
+ "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
+ "learnMore": "Learn more",
+ "continue": "Continue",
+ "pushSketch": "Push Sketch",
+ "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
+ "pull": "Pull",
+ "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
+ "donePulling": "Done pulling ‘{0}’.",
+ "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
+ "push": "Push",
+ "pullFirst": "You have to pull first to be able to push to the Cloud.",
+ "donePushing": "Done pushing ‘{0}’.",
+ "connected": "Συνδέθηκε",
+ "offline": "Εκτός Σύνδεσης",
+ "profilePicture": "Profile picture"
+ },
+ "board": {
+ "installManually": "Install Manually",
+ "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
+ "configDialogTitle": "Επιλέξτε Άλλη Πλακέτα & Θύρα",
+ "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
+ "configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
+ "pleasePickBoard": "Please pick a board connected to the port you have selected.",
+ "showAllAvailablePorts": "Shows all available ports when enabled",
+ "programmer": "Programmer",
+ "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
+ "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}",
+ "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
+ "reselectLater": "Reselect later",
+ "noneSelected": "No boards selected.",
+ "noPortsSelected": "No ports selected for board: '{0}'.",
+ "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
+ "openBoardsConfig": "Select other board and port…",
+ "boardListItem": "{0} at {1}",
+ "selectBoardForInfo": "Please select a board to obtain board info.",
+ "platformMissing": "The platform for the selected '{0}' board is not installed.",
+ "selectPortForInfo": "Please select a port to obtain board info.",
+ "boardInfo": "Board Info",
+ "board": "Board{0}",
+ "port": "Port{0}",
+ "getBoardInfo": "Get Board Info",
+ "inSketchbook": " (in Sketchbook)"
+ },
+ "boardsManager": "Boards Manager",
+ "about": {
+ "label": "About {0}",
+ "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
+ },
+ "contributions": {
+ "addFile": "Add File",
+ "replaceTitle": "Replace",
+ "fileAdded": "One file added to the sketch."
+ },
+ "replaceMsg": "Replace the existing version of {0}?",
+ "library": {
+ "addZip": "Add .ZIP Library...",
+ "zipLibrary": "Library",
+ "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
+ "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
+ "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
+ "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
+ "include": "Include Library",
+ "manageLibraries": "Manage Libraries...",
+ "arduinoLibraries": "Arduino libraries",
+ "contributedLibraries": "Contributed libraries",
+ "title": "Library Manager",
+ "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
+ "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
+ "installOneMissingDependency": "Would you like to install the missing dependency?",
+ "installMissingDependencies": "Would you like to install all the missing dependencies?",
+ "dependenciesForLibrary": "Dependencies for library {0}:{1}",
+ "installAll": "Install all",
+ "installOnly": "Install {0} only",
+ "installedSuccessfully": "Successfully installed library {0}:{1}",
+ "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}"
+ },
+ "selectZip": "Select a zip file containing the library you'd like to add",
+ "sketch": {
+ "archiveSketch": "Archive Sketch",
+ "saveSketchAs": "Save sketch folder as...",
+ "createdArchive": "Created archive '{0}'.",
+ "new": "New",
+ "openRecent": "Open Recent",
+ "showFolder": "Show Sketch Folder",
+ "sketch": "Sketch",
+ "moving": "Moving",
+ "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
+ "cantOpen": "A folder named \"{0}\" already exists. Can't open sketch.",
+ "saveFolderAs": "Save sketch folder as...",
+ "sketchbook": "Sketchbook",
+ "upload": "Upload",
+ "uploadUsingProgrammer": "Upload Using Programmer",
+ "userFieldsNotFoundError": "Can't find user fields for connected board",
+ "doneUploading": "Done uploading.",
+ "configureAndUpload": "Configure And Upload",
+ "verifyOrCompile": "Verify/Compile",
+ "exportBinary": "Export Compiled Binary",
+ "verify": "Verify",
+ "doneCompiling": "Done compiling.",
+ "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
+ "openSketchInNewWindow": "Open Sketch in New Window",
+ "openFolder": "Open Folder",
+ "titleLocalSketchbook": "Local Sketchbook",
+ "titleSketchbook": "Sketchbook",
+ "close": "Are you sure you want to close the sketch?"
+ },
+ "bootloader": {
+ "burnBootloader": "Burn Bootloader",
+ "doneBurningBootloader": "Done burning bootloader."
+ },
+ "editor": {
+ "copyForForum": "Copy for Forum (Markdown)",
+ "commentUncomment": "Comment/Uncomment",
+ "increaseIndent": "Increase Indent",
+ "decreaseIndent": "Decrease Indent",
+ "increaseFontSize": "Increase Font Size",
+ "decreaseFontSize": "Decrease Font Size",
+ "autoFormat": "Auto Format"
+ },
+ "examples": {
+ "menu": "Examples",
+ "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "builtInExamples": "Built-in examples",
+ "customLibrary": "Examples from Custom Libraries",
+ "for": "Examples for {0}",
+ "forAny": "Examples for any board"
+ },
+ "help": {
+ "search": "Search on Arduino.cc",
+ "keyword": "Type a keyword",
+ "gettingStarted": "Getting Started",
+ "environment": "Environment",
+ "troubleshooting": "Troubleshooting",
+ "reference": "Reference",
+ "findInReference": "Find in Reference",
+ "faq": "Frequently Asked Questions",
+ "visit": "Visit Arduino.cc"
+ },
+ "certificate": {
+ "uploadRootCertificates": "Upload SSL Root Certificates",
+ "openContext": "Open context",
+ "remove": "Remove",
+ "upload": "Upload",
+ "addURL": "Add URL to fetch SSL certificate",
+ "enterURL": "Enter URL",
+ "selectCertificateToUpload": "1. Select certificate to upload",
+ "addNew": "Add New",
+ "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
+ "uploadingCertificates": "Uploading certificates.",
+ "certificatesUploaded": "Certificates uploaded.",
+ "uploadFailed": "Upload failed. Please try again.",
+ "selectBoard": "Select a board...",
+ "boardAtPort": "{0} at {1}",
+ "noSupportedBoardConnected": "No supported board connected"
+ },
+ "firmware": {
+ "updater": "WiFi101 / WiFiNINA Firmware Updater",
+ "selectBoard": "Select Board",
+ "checkUpdates": "Check Updates",
+ "selectVersion": "Select firmware version",
+ "install": "Install",
+ "overwriteSketch": "Installation will overwrite the Sketch on the board.",
+ "installingFirmware": "Installing firmware.",
+ "successfullyInstalled": "Firmware succesfully installed.",
+ "failedInstall": "Installation failed. Please try again."
+ },
+ "dialog": {
+ "dontAskAgain": "Don't ask again"
+ },
+ "userFields": {
+ "cancel": "Cancel",
+ "upload": "Upload"
+ },
+ "serial": {
+ "toggleTimestamp": "Toggle Timestamp",
+ "autoscroll": "Autoscroll",
+ "timestamp": "Timestamp",
+ "noLineEndings": "No Line Ending",
+ "newLine": "New Line",
+ "carriageReturn": "Carriage Return",
+ "newLineCarriageReturn": "Both NL & CR",
+ "notConnected": "Not connected. Select a board and a port to connect automatically.",
+ "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
+ "connectionBusy": "Connection failed. Serial port is busy: {0}",
+ "disconnected": "Disconnected {0} from {1}.",
+ "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
+ "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
+ "reconnect": "Reconnecting {0} to {1} in {2} seconds..."
+ },
+ "component": {
+ "uninstall": "Uninstall",
+ "uninstallMsg": "Do you want to uninstall {0}?",
+ "by": "by",
+ "version": "Version {0}",
+ "moreInfo": "More info",
+ "install": "INSTALL",
+ "filterSearch": "Filter your search..."
+ },
+ "electron": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "unsavedChanges": "Οι μη αποθηκευμένες αλλαγές θα χαθούν."
+ },
+ "compile": {
+ "error": "Compilation error: {0}"
+ },
+ "upload": {
+ "error": "{0} error: {1}"
+ },
+ "burnBootloader": {
+ "error": "Error while burning the bootloader: {0}"
+ }
+ },
+ "theia": {
+ "core": {
+ "couldNotSave": "Δεν έγινε αποθήκευση του προγράμματος. Παρακαλώ αντιγράψτε ό,τι δεν έχει αποθηκευθεί στον αγαπημένο σας επεξεργαστή κειμένου, και επανεκινήστε το Ολοκληρωμένο Περιβάλλον Ανάπτυξης IDE.",
+ "offline": "Εκτός Σύνδεσης",
+ "daemonOffline": "CLI Daemon Offline",
+ "cannotConnectBackend": "Cannot connect to the backend.",
+ "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ },
+ "debug": {
+ "start": "Έναρξη...",
+ "typeNotSupported": "The debug session type \"{0}\" is not supported.",
+ "startError": "There was an error starting the debug session, check the logs for more details."
+ },
+ "editor": {
+ "unsavedTitle": "Unsaved – {0}"
+ },
+ "messages": {
+ "expand": "Επαναφορά",
+ "collapse": "Ελαχιστοποίηση"
+ },
+ "workspace": {
+ "fileNewName": "Name for new file",
+ "invalidFilename": "Invalid filename.",
+ "invalidExtension": ".{0} is not a valid extension",
+ "newFileName": "Νέο όνομα για το αρχείο",
+ "deleteCurrentSketch": "Do you want to delete the current sketch?",
+ "sketchDirectoryError": "Υπήρξε ένα λάθος κατά τη δημιουργία του φακέλου. Για περισσότερες λεπτομέρειες δείτε το αρχείο καταγραφής. Η εφαρμογή πιθανόν δε θα δουλέψει όπως αναμένεται."
+ }
+ },
+ "cloud": {
+ "GoToCloud": "GO TO CLOUD"
+ }
+}
diff --git a/i18n/es.json b/i18n/es.json
index 5342f673d..852e69220 100644
--- a/i18n/es.json
+++ b/i18n/es.json
@@ -1,18 +1,18 @@
{
"arduino": {
"common": {
- "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.",
- "noBoardSelected": "No board selected",
+ "offlineIndicator": "Al parecer no estás en línea. Sin una conexión a internet, el CLI de Arduino no podrá descargar los recursos necesarios, lo cual puede ocasionar fallos. Por favor, conecte a internet y reinicie la aplicación.",
+ "noBoardSelected": "Ninguna placa seleccionada.",
"selectedOn": "on {0}",
"notConnected": "[not connected]",
"serialMonitor": "Monitor Serie",
- "oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?",
+ "oldFormat": "El '{0}' aún usa el antiguo formato `.pde` . ¿Deseas cambiar a la nueva extensión `.ino`?.",
"later": "Later",
- "selectBoard": "Select Board",
+ "selectBoard": "Seleccionar Placa",
"unknown": "Unknown",
- "processing": "Processing",
- "saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
- "loseChanges": "If you don't save, your changes will be lost."
+ "processing": "Procesando",
+ "saveChangesToSketch": "¿Deseas guardar los cambios en este código antes de cerrar?",
+ "loseChanges": "Si no guardas, perderás los cambios."
},
"menu": {
"sketch": "Programa",
@@ -21,8 +21,8 @@
"debug": {
"optimizeForDebugging": "Optimize for Debugging",
"debugWithMessage": "Debug - {0}",
- "noPlatformInstalledFor": "Platform is not installed for '{0}'",
- "debuggingNotSupported": "Debugging is not supported by '{0}'"
+ "noPlatformInstalledFor": "La plataforma no está instalada para '{0}'",
+ "debuggingNotSupported": "La depuracion no esta soportada por '{0}'"
},
"preferences": {
"language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
@@ -34,7 +34,7 @@
"ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
"board.certificates": "List of certificates that can be uploaded to boards",
"sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
- "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
+ "cloud.enabled": "Verdadero si la sincronización de código está activada. Valor verdadero por defecto.",
"cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
"cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
"cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
@@ -52,11 +52,11 @@
"showVerbose": "Show verbose output during",
"compilerWarnings": "Compiler warnings",
"automatic": "Automático",
- "compile": "compile",
- "upload": "upload",
- "verifyAfterUpload": "Verify code after upload",
+ "compile": "Compliar",
+ "upload": "Subir",
+ "verifyAfterUpload": "Verificar código después de subir",
"checkForUpdates": "Comprobar actualizaciones al iniciar",
- "editorQuickSuggestions": "Editor Quick Suggestions",
+ "editorQuickSuggestions": "Sugerencias rápidas del editor",
"additionalManagerURLs": "Gestor de URLs Adicionales de Tarjetas",
"noProxy": "No proxy",
"manualProxy": "Manual proxy configuration",
@@ -65,24 +65,24 @@
"enterAdditionalURLs": "Enter additional URLs, one for each row",
"unofficialBoardSupport": "Click for a list of unofficial board support URLs",
"invalid.sketchbook.location": "Invalid sketchbook location: {0}",
- "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
- "invalid.theme": "Invalid theme."
+ "invalid.editorFontSize": "Tamaño de fuente invalido. Debe ser un entero positivo.",
+ "invalid.theme": "Tema no valido."
},
"cloud": {
"signIn": "SIGN IN",
"signOut": "Sign Out",
"chooseSketchVisibility": "Choose visibility of your Sketch:",
- "privateVisibility": "Private. Only you can view the Sketch.",
- "publicVisibility": "Public. Anyone with the link can view the Sketch.",
- "link": "Link:",
+ "privateVisibility": "Privado: Solo tú puedes ver el código.",
+ "publicVisibility": "Público: Cualquiera con el enlace puede ver el código.",
+ "link": "Enlace:",
"embed": "Embed:",
"cloudSketchbook": "Cloud Sketchbook",
- "shareSketch": "Share Sketch",
+ "shareSketch": "Compartir código",
"showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
"pullSketch": "Pull Sketch",
- "openInCloudEditor": "Open in Cloud Editor",
- "options": "Options...",
- "share": "Share...",
+ "openInCloudEditor": "Abrir en editor web",
+ "options": "Opciones...",
+ "share": "Compartir...",
"remote": "Remote",
"emptySketchbook": "Your Sketchbook is empty",
"visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
@@ -99,19 +99,19 @@
"push": "Push",
"pullFirst": "You have to pull first to be able to push to the Cloud.",
"donePushing": "Done pushing ‘{0}’.",
- "connected": "Connected",
+ "connected": "Conectado",
"offline": "Offline",
- "profilePicture": "Profile picture"
+ "profilePicture": "Foto de perfil"
},
"board": {
- "installManually": "Install Manually",
+ "installManually": "Instalar manualmente",
"installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
"configDialogTitle": "Select Other Board & Port",
"configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
"configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
"pleasePickBoard": "Please pick a board connected to the port you have selected.",
"showAllAvailablePorts": "Shows all available ports when enabled",
- "programmer": "Programmer",
+ "programmer": "Programador",
"succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
"succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}",
"couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
@@ -223,7 +223,7 @@
"reference": "Reference",
"findInReference": "Find in Reference",
"faq": "Frequently Asked Questions",
- "visit": "Visit Arduino.cc"
+ "visit": "Visitar Arduino.cc"
},
"certificate": {
"uploadRootCertificates": "Upload SSL Root Certificates",
diff --git a/i18n/eu.json b/i18n/eu.json
new file mode 100644
index 000000000..e96d6ef93
--- /dev/null
+++ b/i18n/eu.json
@@ -0,0 +1,334 @@
+{
+ "arduino": {
+ "common": {
+ "offlineIndicator": "Deskonektatuta zaudela dirudi. Interneterako konexiorik gabe, baliteke Arduino CLI ez izatea gai beharrezko baliabideak deskargatzeko, eta funtzionamendu txarra eragin lezake. Mesedez, konektatu Internetera eta berrabiarazi aplikazioa.",
+ "noBoardSelected": "Plakarik ez da hautatu",
+ "selectedOn": "on {0}",
+ "notConnected": "[konektatu gabe]",
+ "serialMonitor": "Serieko monitorea",
+ "oldFormat": "'{0}' programak `.pde` formatu zaharra erabiltzen du oraindik. `.ino` luzapen berrira aldatu nahi duzu?",
+ "later": "Gero",
+ "selectBoard": "Hautatu plaka",
+ "unknown": "Ezezaguna",
+ "processing": "Prozesatzen",
+ "saveChangesToSketch": "Programa honi egindako aldaketak gorde nahi dituzu itxi aurretik?",
+ "loseChanges": "Ez baduzu gordetzen, aldaketak galduko dira."
+ },
+ "menu": {
+ "sketch": "Programa",
+ "tools": "Tresnak"
+ },
+ "debug": {
+ "optimizeForDebugging": "Optimizatu arazketarako",
+ "debugWithMessage": "Araztu - {0}",
+ "noPlatformInstalledFor": "Platform is not installed for '{0}'",
+ "debuggingNotSupported": "Debugging is not supported by '{0}'"
+ },
+ "preferences": {
+ "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
+ "compile.verbose": "True for verbose compile output. False by default",
+ "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
+ "upload.verbose": "True for verbose upload output. False by default.",
+ "window.autoScale": "True if the user interface automatically scales with the font size.",
+ "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.",
+ "ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
+ "board.certificates": "List of certificates that can be uploaded to boards",
+ "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
+ "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
+ "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
+ "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
+ "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
+ "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
+ "auth.clientID": "OAuth2 bezeroaren IDa",
+ "auth.domain": "OAuth2 domeinua.",
+ "auth.audience": "OAuth2 audientzia.",
+ "auth.registerUri": "The URI used to register a new user.",
+ "network": "Sarea",
+ "sketchbook.location": "Programa bildumaren kokalekua",
+ "browse": "Arakatu",
+ "files.inside.sketches": "Erakutsi fitxategiak programen barruan",
+ "editorFontSize": "Editorearen letra-tamaina",
+ "interfaceScale": "Interfazearen eskala",
+ "showVerbose": "Erakutsi irteera xehatua honetan zehar:",
+ "compilerWarnings": "Konpiladorearen abisuak",
+ "automatic": "Automatikoa",
+ "compile": "konpilazioa",
+ "upload": "karga",
+ "verifyAfterUpload": "Egiaztatu kodea kargatu ondoren",
+ "checkForUpdates": "Egiaztatu eguneratzerik baden abioan",
+ "editorQuickSuggestions": "Editorearen iradokizun azkarrak",
+ "additionalManagerURLs": "Plaka kudeatzaile gehigarrien URLak:",
+ "noProxy": "Proxyrik ez",
+ "manualProxy": "Proxyaren eskuzko konfigurazioa",
+ "newSketchbookLocation": "Hautatu programa bilduma berriaren kokalekua",
+ "choose": "Aukeratu",
+ "enterAdditionalURLs": "Sartu URL gehigarriak, bat errenkadako",
+ "unofficialBoardSupport": "Egin klik ofizialak ez diren plaken laguntza-URL zerrenda ikusteko",
+ "invalid.sketchbook.location": "Programa bildumaren kokaleku baliogabea: {0}",
+ "invalid.editorFontSize": "Editorearen letra-tamaina baliogabea. Osoko zenbaki positibo bat izan behar du.",
+ "invalid.theme": "Invalid theme."
+ },
+ "cloud": {
+ "signIn": "SIGN IN",
+ "signOut": "Sign Out",
+ "chooseSketchVisibility": "Choose visibility of your Sketch:",
+ "privateVisibility": "Private. Only you can view the Sketch.",
+ "publicVisibility": "Public. Anyone with the link can view the Sketch.",
+ "link": "Esteka:",
+ "embed": "Embed:",
+ "cloudSketchbook": "Hodeiko programa bilduma",
+ "shareSketch": "Partekatu programa",
+ "showHideRemoveSketchbook": "Erakutsi/Ezkutatu urruneko programa bilduma",
+ "pullSketch": "Pull Sketch",
+ "openInCloudEditor": "Ireki hodeiko editorean",
+ "options": "Aukerak...",
+ "share": "Partekatu...",
+ "remote": "Remote",
+ "emptySketchbook": "Zure programa bilduma hutsik dago",
+ "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
+ "signInToCloud": "Sign in to Arduino Cloud",
+ "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
+ "learnMore": "Ikasi gehiago",
+ "continue": "Jarraitu",
+ "pushSketch": "Push Sketch",
+ "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
+ "pull": "Pull",
+ "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
+ "donePulling": "Done pulling ‘{0}’.",
+ "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
+ "push": "Push",
+ "pullFirst": "You have to pull first to be able to push to the Cloud.",
+ "donePushing": "Done pushing ‘{0}’.",
+ "connected": "Konektatuta",
+ "offline": "Offline",
+ "profilePicture": "Profile picture"
+ },
+ "board": {
+ "installManually": "Install Manually",
+ "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
+ "configDialogTitle": "Select Other Board & Port",
+ "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
+ "configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
+ "pleasePickBoard": "Please pick a board connected to the port you have selected.",
+ "showAllAvailablePorts": "Shows all available ports when enabled",
+ "programmer": "Programmer",
+ "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
+ "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}",
+ "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
+ "reselectLater": "Reselect later",
+ "noneSelected": "No boards selected.",
+ "noPortsSelected": "No ports selected for board: '{0}'.",
+ "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
+ "openBoardsConfig": "Hautatu beste plaka eta ataka bat...",
+ "boardListItem": "{0} at {1}",
+ "selectBoardForInfo": "Please select a board to obtain board info.",
+ "platformMissing": "The platform for the selected '{0}' board is not installed.",
+ "selectPortForInfo": "Please select a port to obtain board info.",
+ "boardInfo": "Plakaren informazioa",
+ "board": "{0} plaka",
+ "port": "{0} ataka",
+ "getBoardInfo": "Eskuratu plakaren informazioa",
+ "inSketchbook": "(programa bilduman)"
+ },
+ "boardsManager": "Plaka kudeatzailea",
+ "about": {
+ "label": "About {0}",
+ "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
+ },
+ "contributions": {
+ "addFile": "Gehitu fitxategia",
+ "replaceTitle": "Ordezkatu",
+ "fileAdded": "Fitxategi bat gehitu da programara."
+ },
+ "replaceMsg": "Replace the existing version of {0}?",
+ "library": {
+ "addZip": "Gehitu .ZIP liburutegia...",
+ "zipLibrary": "Liburutegia",
+ "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
+ "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
+ "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
+ "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
+ "include": "Include Library",
+ "manageLibraries": "Kudeatu liburutegiak...",
+ "arduinoLibraries": "Arduino liburutegiak",
+ "contributedLibraries": "Contributed libraries",
+ "title": "Liburutegi kudeatzailea",
+ "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
+ "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
+ "installOneMissingDependency": "Would you like to install the missing dependency?",
+ "installMissingDependencies": "Would you like to install all the missing dependencies?",
+ "dependenciesForLibrary": "Dependencies for library {0}:{1}",
+ "installAll": "Install all",
+ "installOnly": "Install {0} only",
+ "installedSuccessfully": "Successfully installed library {0}:{1}",
+ "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}"
+ },
+ "selectZip": "Select a zip file containing the library you'd like to add",
+ "sketch": {
+ "archiveSketch": "Artxibatu programa",
+ "saveSketchAs": "Gorde programen karpeta honela...",
+ "createdArchive": "'{0}' artxiboa sortu da.",
+ "new": "Berria",
+ "openRecent": "Open Recent",
+ "showFolder": "Show Sketch Folder",
+ "sketch": "Programa",
+ "moving": "Moving",
+ "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
+ "cantOpen": "A folder named \"{0}\" already exists. Can't open sketch.",
+ "saveFolderAs": "Save sketch folder as...",
+ "sketchbook": "Programa bilduma",
+ "upload": "Kargatu",
+ "uploadUsingProgrammer": "Upload Using Programmer",
+ "userFieldsNotFoundError": "Can't find user fields for connected board",
+ "doneUploading": "Done uploading.",
+ "configureAndUpload": "Konfiguratu eta kargatu",
+ "verifyOrCompile": "Egiaztatu/Konpilatu",
+ "exportBinary": "Esportatu konpilatutako bitarra",
+ "verify": "Egiaztatu",
+ "doneCompiling": "Done compiling.",
+ "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
+ "openSketchInNewWindow": "Open Sketch in New Window",
+ "openFolder": "Ireki karpeta",
+ "titleLocalSketchbook": "Programa bilduma lokala",
+ "titleSketchbook": "Programa bilduma",
+ "close": "Ziur zaude programa itxi nahi duzula?"
+ },
+ "bootloader": {
+ "burnBootloader": "Burn Bootloader",
+ "doneBurningBootloader": "Done burning bootloader."
+ },
+ "editor": {
+ "copyForForum": "Kopiatu fororako (Markdown)",
+ "commentUncomment": "Comment/Uncomment",
+ "increaseIndent": "Handitu koska",
+ "decreaseIndent": "Txikiagotu koska",
+ "increaseFontSize": "Handitu letra-tamaina",
+ "decreaseFontSize": "Txikiagotu letra-tamaina",
+ "autoFormat": "Formatu automatikoa"
+ },
+ "examples": {
+ "menu": "Adibideak",
+ "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "builtInExamples": "Built-in examples",
+ "customLibrary": "Examples from Custom Libraries",
+ "for": "Examples for {0}",
+ "forAny": "Examples for any board"
+ },
+ "help": {
+ "search": "Search on Arduino.cc",
+ "keyword": "Type a keyword",
+ "gettingStarted": "Getting Started",
+ "environment": "Ingurunea",
+ "troubleshooting": "Troubleshooting",
+ "reference": "Erreferentzia",
+ "findInReference": "Bilatu erreferentzian",
+ "faq": "Frequently Asked Questions",
+ "visit": "Visit Arduino.cc"
+ },
+ "certificate": {
+ "uploadRootCertificates": "Upload SSL Root Certificates",
+ "openContext": "Ireki testuingurua",
+ "remove": "Kendu",
+ "upload": "Kargatu",
+ "addURL": "Add URL to fetch SSL certificate",
+ "enterURL": "Enter URL",
+ "selectCertificateToUpload": "1. Select certificate to upload",
+ "addNew": "Gehitu berria",
+ "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
+ "uploadingCertificates": "Ziurtagiriak kargatzen.",
+ "certificatesUploaded": "Ziurtagiriak kargatuta.",
+ "uploadFailed": "Upload failed. Please try again.",
+ "selectBoard": "Hautatu plaka bat...",
+ "boardAtPort": "{0} at {1}",
+ "noSupportedBoardConnected": "No supported board connected"
+ },
+ "firmware": {
+ "updater": "WiFi101 / WiFiNINA Firmware Updater",
+ "selectBoard": "Hautatu plaka",
+ "checkUpdates": "Egiaztatu eguneraketak",
+ "selectVersion": "Hautatu firmware bertsioa",
+ "install": "Instalatu",
+ "overwriteSketch": "Installation will overwrite the Sketch on the board.",
+ "installingFirmware": "Installing firmware.",
+ "successfullyInstalled": "Firmware succesfully installed.",
+ "failedInstall": "Installation failed. Please try again."
+ },
+ "dialog": {
+ "dontAskAgain": "Don't ask again"
+ },
+ "userFields": {
+ "cancel": "Utzi",
+ "upload": "Kargatu"
+ },
+ "serial": {
+ "toggleTimestamp": "Txandakatu denbora-zigilua",
+ "autoscroll": "Autoscroll",
+ "timestamp": "Timestamp",
+ "noLineEndings": "No Line Ending",
+ "newLine": "New Line",
+ "carriageReturn": "Carriage Return",
+ "newLineCarriageReturn": "Both NL & CR",
+ "notConnected": "Not connected. Select a board and a port to connect automatically.",
+ "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
+ "connectionBusy": "Connection failed. Serial port is busy: {0}",
+ "disconnected": "Disconnected {0} from {1}.",
+ "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
+ "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
+ "reconnect": "Reconnecting {0} to {1} in {2} seconds..."
+ },
+ "component": {
+ "uninstall": "Desinstalatu",
+ "uninstallMsg": "Do you want to uninstall {0}?",
+ "by": "by",
+ "version": "{0} bertsioa",
+ "moreInfo": "Informazio gehiago",
+ "install": "INSTALATU",
+ "filterSearch": "Filter your search..."
+ },
+ "electron": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "unsavedChanges": "Any unsaved changes will not be saved."
+ },
+ "compile": {
+ "error": "Compilation error: {0}"
+ },
+ "upload": {
+ "error": "{0} error: {1}"
+ },
+ "burnBootloader": {
+ "error": "Error while burning the bootloader: {0}"
+ }
+ },
+ "theia": {
+ "core": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "offline": "Offline",
+ "daemonOffline": "CLI Daemon Offline",
+ "cannotConnectBackend": "Cannot connect to the backend.",
+ "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ },
+ "debug": {
+ "start": "Hasi...",
+ "typeNotSupported": "The debug session type \"{0}\" is not supported.",
+ "startError": "There was an error starting the debug session, check the logs for more details."
+ },
+ "editor": {
+ "unsavedTitle": "Gorde gabe – {0}"
+ },
+ "messages": {
+ "expand": "Zabaldu",
+ "collapse": "Tolestu"
+ },
+ "workspace": {
+ "fileNewName": "Fitxategi berriaren izena",
+ "invalidFilename": "Fitxategi-izen baliogabea.",
+ "invalidExtension": ".{0} is not a valid extension",
+ "newFileName": "Fitxategiaren izen berria",
+ "deleteCurrentSketch": "Do you want to delete the current sketch?",
+ "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
+ }
+ },
+ "cloud": {
+ "GoToCloud": "JOAN HODEIRA"
+ }
+}
diff --git a/i18n/he.json b/i18n/he.json
new file mode 100644
index 000000000..bdcd9967f
--- /dev/null
+++ b/i18n/he.json
@@ -0,0 +1,334 @@
+{
+ "arduino": {
+ "common": {
+ "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.",
+ "noBoardSelected": "לא נבחר לוח",
+ "selectedOn": "on {0}",
+ "notConnected": "[לא מחובר]",
+ "serialMonitor": "מוניטור סיריאלי",
+ "oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?",
+ "later": "אחר כך",
+ "selectBoard": "בחר לוח",
+ "unknown": "לא ידוע",
+ "processing": "מעבד",
+ "saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
+ "loseChanges": "If you don't save, your changes will be lost."
+ },
+ "menu": {
+ "sketch": "Sketch",
+ "tools": "כלים"
+ },
+ "debug": {
+ "optimizeForDebugging": "Optimize for Debugging",
+ "debugWithMessage": "Debug - {0}",
+ "noPlatformInstalledFor": "פלטפורמה אינה מותקנת עבור ׳{0}׳",
+ "debuggingNotSupported": "Debugging is not supported by '{0}'"
+ },
+ "preferences": {
+ "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
+ "compile.verbose": "True for verbose compile output. False by default",
+ "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
+ "upload.verbose": "True for verbose upload output. False by default.",
+ "window.autoScale": "True if the user interface automatically scales with the font size.",
+ "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.",
+ "ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
+ "board.certificates": "List of certificates that can be uploaded to boards",
+ "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
+ "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
+ "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
+ "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
+ "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
+ "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
+ "auth.clientID": "The OAuth2 client ID.",
+ "auth.domain": "The OAuth2 domain.",
+ "auth.audience": "The OAuth2 audience.",
+ "auth.registerUri": "The URI used to register a new user.",
+ "network": "רשת",
+ "sketchbook.location": "Sketchbook location",
+ "browse": "Browse",
+ "files.inside.sketches": "Show files inside Sketches",
+ "editorFontSize": "גודל פונט לעורך",
+ "interfaceScale": "Interface scale",
+ "showVerbose": "Show verbose output during",
+ "compilerWarnings": "Compiler warnings",
+ "automatic": "אוטומטי",
+ "compile": "compile",
+ "upload": "upload",
+ "verifyAfterUpload": "Verify code after upload",
+ "checkForUpdates": "Check for updates on startup",
+ "editorQuickSuggestions": "Editor Quick Suggestions",
+ "additionalManagerURLs": "Additional Boards Manager URLs",
+ "noProxy": "No proxy",
+ "manualProxy": "Manual proxy configuration",
+ "newSketchbookLocation": "Select new sketchbook location",
+ "choose": "בחרו",
+ "enterAdditionalURLs": "הקלד כתובות נוספות, אחת לשורה",
+ "unofficialBoardSupport": "Click for a list of unofficial board support URLs",
+ "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
+ "invalid.editorFontSize": "גודל גופן לא חוקי. חייב להיות מספר חיובי.",
+ "invalid.theme": "ערכת נושא לא חוקית."
+ },
+ "cloud": {
+ "signIn": "התחברות",
+ "signOut": "התנתק",
+ "chooseSketchVisibility": "Choose visibility of your Sketch:",
+ "privateVisibility": "Private. Only you can view the Sketch.",
+ "publicVisibility": "Public. Anyone with the link can view the Sketch.",
+ "link": "קישור:",
+ "embed": "הטמע:",
+ "cloudSketchbook": "Cloud Sketchbook",
+ "shareSketch": "Share Sketch",
+ "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
+ "pullSketch": "Pull Sketch",
+ "openInCloudEditor": "Open in Cloud Editor",
+ "options": "אפשרויות...",
+ "share": "שיתוף...",
+ "remote": "מרוחק",
+ "emptySketchbook": "Your Sketchbook is empty",
+ "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
+ "signInToCloud": "Sign in to Arduino Cloud",
+ "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
+ "learnMore": "למדו עוד",
+ "continue": "המשך",
+ "pushSketch": "Push Sketch",
+ "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
+ "pull": "Pull",
+ "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
+ "donePulling": "Done pulling ‘{0}’.",
+ "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
+ "push": "Push",
+ "pullFirst": "You have to pull first to be able to push to the Cloud.",
+ "donePushing": "Done pushing ‘{0}’.",
+ "connected": "מחובר",
+ "offline": "מנותק",
+ "profilePicture": "תמונת פרופיל"
+ },
+ "board": {
+ "installManually": "התקן ידנית",
+ "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
+ "configDialogTitle": "בחר לוח ופורט אחר...",
+ "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
+ "configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
+ "pleasePickBoard": "Please pick a board connected to the port you have selected.",
+ "showAllAvailablePorts": "הצג את כל הפורטים הזמינים כשמופעל",
+ "programmer": "Programmer",
+ "succesfullyInstalledPlatform": "פלטפורמה הותקנה בהצלחה {0}:{1}",
+ "succesfullyUninstalledPlatform": "פלטפורמה הוסרה בהצלחה {0}:{1}",
+ "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
+ "reselectLater": "בחר מחדש מאוחר יותר",
+ "noneSelected": "לא נבחרו לוחות.",
+ "noPortsSelected": "No ports selected for board: '{0}'.",
+ "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
+ "openBoardsConfig": "בחר לוח ופורט אחר...",
+ "boardListItem": "{0} at {1}",
+ "selectBoardForInfo": "אנא בחר לוח לקבל מידע אודותיו.",
+ "platformMissing": "The platform for the selected '{0}' board is not installed.",
+ "selectPortForInfo": "אנא בחר פורט לקבלת מידע אודותיו.",
+ "boardInfo": "פרטי הלוח",
+ "board": "לוח{0}",
+ "port": "פורט{0}",
+ "getBoardInfo": "Get Board Info",
+ "inSketchbook": " (in Sketchbook)"
+ },
+ "boardsManager": "מנהל לוחות",
+ "about": {
+ "label": "About {0}",
+ "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
+ },
+ "contributions": {
+ "addFile": "הוסף קובץ",
+ "replaceTitle": "החלף",
+ "fileAdded": "One file added to the sketch."
+ },
+ "replaceMsg": "Replace the existing version of {0}?",
+ "library": {
+ "addZip": "Add .ZIP Library...",
+ "zipLibrary": "ספריה",
+ "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
+ "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
+ "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
+ "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
+ "include": "השתמש בספריה",
+ "manageLibraries": "נהל ספריות...",
+ "arduinoLibraries": "ספריות ארדואינו",
+ "contributedLibraries": "Contributed libraries",
+ "title": "מנהל ספריות",
+ "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
+ "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
+ "installOneMissingDependency": "Would you like to install the missing dependency?",
+ "installMissingDependencies": "Would you like to install all the missing dependencies?",
+ "dependenciesForLibrary": "תלויות בספריה {0}:{1}",
+ "installAll": "התקן הכל",
+ "installOnly": "התקן רק את {0}",
+ "installedSuccessfully": "ספריה הותקנה בהצלחה {0}:{1}",
+ "uninstalledSuccessfully": "ספריה הוסרה בהצלחה {0}:{1}"
+ },
+ "selectZip": "Select a zip file containing the library you'd like to add",
+ "sketch": {
+ "archiveSketch": "Archive Sketch",
+ "saveSketchAs": "Save sketch folder as...",
+ "createdArchive": "ארכיון ׳{0}׳ נוצר.",
+ "new": "חדש",
+ "openRecent": "Open Recent",
+ "showFolder": "Show Sketch Folder",
+ "sketch": "Sketch",
+ "moving": "מעביר",
+ "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
+ "cantOpen": "A folder named \"{0}\" already exists. Can't open sketch.",
+ "saveFolderAs": "Save sketch folder as...",
+ "sketchbook": "Sketchbook",
+ "upload": "Upload",
+ "uploadUsingProgrammer": "Upload Using Programmer",
+ "userFieldsNotFoundError": "Can't find user fields for connected board",
+ "doneUploading": "Done uploading.",
+ "configureAndUpload": "Configure And Upload",
+ "verifyOrCompile": "Verify/Compile",
+ "exportBinary": "Export Compiled Binary",
+ "verify": "Verify",
+ "doneCompiling": "Done compiling.",
+ "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
+ "openSketchInNewWindow": "Open Sketch in New Window",
+ "openFolder": "פתח תיקיה",
+ "titleLocalSketchbook": "Local Sketchbook",
+ "titleSketchbook": "Sketchbook",
+ "close": "Are you sure you want to close the sketch?"
+ },
+ "bootloader": {
+ "burnBootloader": "Burn Bootloader",
+ "doneBurningBootloader": "Done burning bootloader."
+ },
+ "editor": {
+ "copyForForum": "Copy for Forum (Markdown)",
+ "commentUncomment": "Comment/Uncomment",
+ "increaseIndent": "הגדל הזחה",
+ "decreaseIndent": "הקטן הזחה",
+ "increaseFontSize": "הגדל גודל גופן",
+ "decreaseFontSize": "הקטן גודל גופן",
+ "autoFormat": "Auto Format"
+ },
+ "examples": {
+ "menu": "דוגמאות",
+ "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "builtInExamples": "דוגמאות מובנות",
+ "customLibrary": "Examples from Custom Libraries",
+ "for": "דוגמאות עבור {0}",
+ "forAny": "דוגמאות לכל לוח"
+ },
+ "help": {
+ "search": "Search on Arduino.cc",
+ "keyword": "הקלד מילה",
+ "gettingStarted": "Getting Started",
+ "environment": "סביבה",
+ "troubleshooting": "Troubleshooting",
+ "reference": "Reference",
+ "findInReference": "Find in Reference",
+ "faq": "שאלות נפוצות",
+ "visit": "בקר ב Arduino.cc"
+ },
+ "certificate": {
+ "uploadRootCertificates": "Upload SSL Root Certificates",
+ "openContext": "Open context",
+ "remove": "הסר",
+ "upload": "Upload",
+ "addURL": "Add URL to fetch SSL certificate",
+ "enterURL": "הקלד כתובת",
+ "selectCertificateToUpload": "1. Select certificate to upload",
+ "addNew": "הוסף חדש",
+ "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
+ "uploadingCertificates": "Uploading certificates.",
+ "certificatesUploaded": "Certificates uploaded.",
+ "uploadFailed": "Upload failed. Please try again.",
+ "selectBoard": "בחר לוח...",
+ "boardAtPort": "{0} at {1}",
+ "noSupportedBoardConnected": "No supported board connected"
+ },
+ "firmware": {
+ "updater": "WiFi101 / WiFiNINA Firmware Updater",
+ "selectBoard": "בחר לוח",
+ "checkUpdates": "בדוק עדכונים",
+ "selectVersion": "Select firmware version",
+ "install": "התקן",
+ "overwriteSketch": "Installation will overwrite the Sketch on the board.",
+ "installingFirmware": "Installing firmware.",
+ "successfullyInstalled": "Firmware succesfully installed.",
+ "failedInstall": "Installation failed. Please try again."
+ },
+ "dialog": {
+ "dontAskAgain": "אל תשאל שוב"
+ },
+ "userFields": {
+ "cancel": "ביטול",
+ "upload": "Upload"
+ },
+ "serial": {
+ "toggleTimestamp": "Toggle Timestamp",
+ "autoscroll": "גלילה אוטומטית",
+ "timestamp": "חותמת זמן",
+ "noLineEndings": "ללא סיום שורה",
+ "newLine": "שורה חדשה",
+ "carriageReturn": "Carriage Return",
+ "newLineCarriageReturn": "Both NL & CR",
+ "notConnected": "Not connected. Select a board and a port to connect automatically.",
+ "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
+ "connectionBusy": "Connection failed. Serial port is busy: {0}",
+ "disconnected": "{0} נותק מ {1}.",
+ "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
+ "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
+ "reconnect": "Reconnecting {0} to {1} in {2} seconds..."
+ },
+ "component": {
+ "uninstall": "הסרה",
+ "uninstallMsg": "האם ברצונך להסיר את {0}?",
+ "by": "by",
+ "version": "גירסה {0}",
+ "moreInfo": "מידע נוסף",
+ "install": "התקן",
+ "filterSearch": "סנן את החיפוש..."
+ },
+ "electron": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "unsavedChanges": "Any unsaved changes will not be saved."
+ },
+ "compile": {
+ "error": "Compilation error: {0}"
+ },
+ "upload": {
+ "error": "{0} שגיאה: {1}"
+ },
+ "burnBootloader": {
+ "error": "Error while burning the bootloader: {0}"
+ }
+ },
+ "theia": {
+ "core": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "offline": "מנותק",
+ "daemonOffline": "CLI Daemon Offline",
+ "cannotConnectBackend": "Cannot connect to the backend.",
+ "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ },
+ "debug": {
+ "start": "התחל...",
+ "typeNotSupported": "The debug session type \"{0}\" is not supported.",
+ "startError": "There was an error starting the debug session, check the logs for more details."
+ },
+ "editor": {
+ "unsavedTitle": "לא שמור – {0}"
+ },
+ "messages": {
+ "expand": "הרחב",
+ "collapse": "כווץ"
+ },
+ "workspace": {
+ "fileNewName": "שם הקובץ החדש",
+ "invalidFilename": "שם קובץ לא חוקי.",
+ "invalidExtension": "{0} אינה סיומת תקנית.",
+ "newFileName": "שם חדש לקובץ",
+ "deleteCurrentSketch": "Do you want to delete the current sketch?",
+ "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
+ }
+ },
+ "cloud": {
+ "GoToCloud": "GO TO CLOUD"
+ }
+}
diff --git a/i18n/hu.json b/i18n/hu.json
new file mode 100644
index 000000000..459770646
--- /dev/null
+++ b/i18n/hu.json
@@ -0,0 +1,334 @@
+{
+ "arduino": {
+ "common": {
+ "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.",
+ "noBoardSelected": "No board selected",
+ "selectedOn": "on {0}",
+ "notConnected": "[not connected]",
+ "serialMonitor": "Serial Monitor",
+ "oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?",
+ "later": "Later",
+ "selectBoard": "Select Board",
+ "unknown": "Unknown",
+ "processing": "Processing",
+ "saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
+ "loseChanges": "If you don't save, your changes will be lost."
+ },
+ "menu": {
+ "sketch": "Sketch",
+ "tools": "Tools"
+ },
+ "debug": {
+ "optimizeForDebugging": "Optimize for Debugging",
+ "debugWithMessage": "Debug - {0}",
+ "noPlatformInstalledFor": "Platform is not installed for '{0}'",
+ "debuggingNotSupported": "Debugging is not supported by '{0}'"
+ },
+ "preferences": {
+ "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
+ "compile.verbose": "True for verbose compile output. False by default",
+ "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
+ "upload.verbose": "True for verbose upload output. False by default.",
+ "window.autoScale": "True if the user interface automatically scales with the font size.",
+ "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.",
+ "ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
+ "board.certificates": "List of certificates that can be uploaded to boards",
+ "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
+ "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
+ "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
+ "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
+ "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
+ "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
+ "auth.clientID": "The OAuth2 client ID.",
+ "auth.domain": "The OAuth2 domain.",
+ "auth.audience": "The OAuth2 audience.",
+ "auth.registerUri": "The URI used to register a new user.",
+ "network": "Network",
+ "sketchbook.location": "Sketchbook location",
+ "browse": "Browse",
+ "files.inside.sketches": "Show files inside Sketches",
+ "editorFontSize": "Editor font size",
+ "interfaceScale": "Interface scale",
+ "showVerbose": "Show verbose output during",
+ "compilerWarnings": "Compiler warnings",
+ "automatic": "Automatic",
+ "compile": "compile",
+ "upload": "upload",
+ "verifyAfterUpload": "Verify code after upload",
+ "checkForUpdates": "Check for updates on startup",
+ "editorQuickSuggestions": "Editor Quick Suggestions",
+ "additionalManagerURLs": "Additional Boards Manager URLs",
+ "noProxy": "No proxy",
+ "manualProxy": "Manual proxy configuration",
+ "newSketchbookLocation": "Select new sketchbook location",
+ "choose": "Choose",
+ "enterAdditionalURLs": "Enter additional URLs, one for each row",
+ "unofficialBoardSupport": "Click for a list of unofficial board support URLs",
+ "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
+ "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
+ "invalid.theme": "Invalid theme."
+ },
+ "cloud": {
+ "signIn": "SIGN IN",
+ "signOut": "Sign Out",
+ "chooseSketchVisibility": "Choose visibility of your Sketch:",
+ "privateVisibility": "Private. Only you can view the Sketch.",
+ "publicVisibility": "Public. Anyone with the link can view the Sketch.",
+ "link": "Link:",
+ "embed": "Embed:",
+ "cloudSketchbook": "Cloud Sketchbook",
+ "shareSketch": "Share Sketch",
+ "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
+ "pullSketch": "Pull Sketch",
+ "openInCloudEditor": "Open in Cloud Editor",
+ "options": "Options...",
+ "share": "Share...",
+ "remote": "Remote",
+ "emptySketchbook": "Your Sketchbook is empty",
+ "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
+ "signInToCloud": "Sign in to Arduino Cloud",
+ "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
+ "learnMore": "Learn more",
+ "continue": "Continue",
+ "pushSketch": "Push Sketch",
+ "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
+ "pull": "Pull",
+ "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
+ "donePulling": "Done pulling ‘{0}’.",
+ "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
+ "push": "Push",
+ "pullFirst": "You have to pull first to be able to push to the Cloud.",
+ "donePushing": "Done pushing ‘{0}’.",
+ "connected": "Connected",
+ "offline": "Offline",
+ "profilePicture": "Profile picture"
+ },
+ "board": {
+ "installManually": "Install Manually",
+ "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
+ "configDialogTitle": "Select Other Board & Port",
+ "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
+ "configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
+ "pleasePickBoard": "Please pick a board connected to the port you have selected.",
+ "showAllAvailablePorts": "Shows all available ports when enabled",
+ "programmer": "Programmer",
+ "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
+ "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}",
+ "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
+ "reselectLater": "Reselect later",
+ "noneSelected": "No boards selected.",
+ "noPortsSelected": "No ports selected for board: '{0}'.",
+ "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
+ "openBoardsConfig": "Select other board and port…",
+ "boardListItem": "{0} at {1}",
+ "selectBoardForInfo": "Please select a board to obtain board info.",
+ "platformMissing": "The platform for the selected '{0}' board is not installed.",
+ "selectPortForInfo": "Please select a port to obtain board info.",
+ "boardInfo": "Board Info",
+ "board": "Board{0}",
+ "port": "Port{0}",
+ "getBoardInfo": "Get Board Info",
+ "inSketchbook": " (in Sketchbook)"
+ },
+ "boardsManager": "Boards Manager",
+ "about": {
+ "label": "About {0}",
+ "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
+ },
+ "contributions": {
+ "addFile": "Add File",
+ "replaceTitle": "Replace",
+ "fileAdded": "One file added to the sketch."
+ },
+ "replaceMsg": "Replace the existing version of {0}?",
+ "library": {
+ "addZip": "Add .ZIP Library...",
+ "zipLibrary": "Library",
+ "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
+ "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
+ "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
+ "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
+ "include": "Include Library",
+ "manageLibraries": "Manage Libraries...",
+ "arduinoLibraries": "Arduino libraries",
+ "contributedLibraries": "Contributed libraries",
+ "title": "Library Manager",
+ "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
+ "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
+ "installOneMissingDependency": "Would you like to install the missing dependency?",
+ "installMissingDependencies": "Would you like to install all the missing dependencies?",
+ "dependenciesForLibrary": "Dependencies for library {0}:{1}",
+ "installAll": "Install all",
+ "installOnly": "Install {0} only",
+ "installedSuccessfully": "Successfully installed library {0}:{1}",
+ "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}"
+ },
+ "selectZip": "Select a zip file containing the library you'd like to add",
+ "sketch": {
+ "archiveSketch": "Archive Sketch",
+ "saveSketchAs": "Save sketch folder as...",
+ "createdArchive": "Created archive '{0}'.",
+ "new": "New",
+ "openRecent": "Open Recent",
+ "showFolder": "Show Sketch Folder",
+ "sketch": "Sketch",
+ "moving": "Moving",
+ "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
+ "cantOpen": "A folder named \"{0}\" already exists. Can't open sketch.",
+ "saveFolderAs": "Save sketch folder as...",
+ "sketchbook": "Sketchbook",
+ "upload": "Upload",
+ "uploadUsingProgrammer": "Upload Using Programmer",
+ "userFieldsNotFoundError": "Can't find user fields for connected board",
+ "doneUploading": "Done uploading.",
+ "configureAndUpload": "Configure And Upload",
+ "verifyOrCompile": "Verify/Compile",
+ "exportBinary": "Export Compiled Binary",
+ "verify": "Verify",
+ "doneCompiling": "Done compiling.",
+ "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
+ "openSketchInNewWindow": "Open Sketch in New Window",
+ "openFolder": "Open Folder",
+ "titleLocalSketchbook": "Local Sketchbook",
+ "titleSketchbook": "Sketchbook",
+ "close": "Are you sure you want to close the sketch?"
+ },
+ "bootloader": {
+ "burnBootloader": "Burn Bootloader",
+ "doneBurningBootloader": "Done burning bootloader."
+ },
+ "editor": {
+ "copyForForum": "Copy for Forum (Markdown)",
+ "commentUncomment": "Comment/Uncomment",
+ "increaseIndent": "Increase Indent",
+ "decreaseIndent": "Decrease Indent",
+ "increaseFontSize": "Increase Font Size",
+ "decreaseFontSize": "Decrease Font Size",
+ "autoFormat": "Auto Format"
+ },
+ "examples": {
+ "menu": "Examples",
+ "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "builtInExamples": "Built-in examples",
+ "customLibrary": "Examples from Custom Libraries",
+ "for": "Examples for {0}",
+ "forAny": "Examples for any board"
+ },
+ "help": {
+ "search": "Search on Arduino.cc",
+ "keyword": "Type a keyword",
+ "gettingStarted": "Getting Started",
+ "environment": "Environment",
+ "troubleshooting": "Troubleshooting",
+ "reference": "Reference",
+ "findInReference": "Find in Reference",
+ "faq": "Frequently Asked Questions",
+ "visit": "Visit Arduino.cc"
+ },
+ "certificate": {
+ "uploadRootCertificates": "Upload SSL Root Certificates",
+ "openContext": "Open context",
+ "remove": "Remove",
+ "upload": "Upload",
+ "addURL": "Add URL to fetch SSL certificate",
+ "enterURL": "Enter URL",
+ "selectCertificateToUpload": "1. Select certificate to upload",
+ "addNew": "Add New",
+ "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
+ "uploadingCertificates": "Uploading certificates.",
+ "certificatesUploaded": "Certificates uploaded.",
+ "uploadFailed": "Upload failed. Please try again.",
+ "selectBoard": "Select a board...",
+ "boardAtPort": "{0} at {1}",
+ "noSupportedBoardConnected": "No supported board connected"
+ },
+ "firmware": {
+ "updater": "WiFi101 / WiFiNINA Firmware Updater",
+ "selectBoard": "Select Board",
+ "checkUpdates": "Check Updates",
+ "selectVersion": "Select firmware version",
+ "install": "Install",
+ "overwriteSketch": "Installation will overwrite the Sketch on the board.",
+ "installingFirmware": "Installing firmware.",
+ "successfullyInstalled": "Firmware succesfully installed.",
+ "failedInstall": "Installation failed. Please try again."
+ },
+ "dialog": {
+ "dontAskAgain": "Don't ask again"
+ },
+ "userFields": {
+ "cancel": "Cancel",
+ "upload": "Upload"
+ },
+ "serial": {
+ "toggleTimestamp": "Toggle Timestamp",
+ "autoscroll": "Autoscroll",
+ "timestamp": "Timestamp",
+ "noLineEndings": "No Line Ending",
+ "newLine": "New Line",
+ "carriageReturn": "Carriage Return",
+ "newLineCarriageReturn": "Both NL & CR",
+ "notConnected": "Not connected. Select a board and a port to connect automatically.",
+ "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
+ "connectionBusy": "Connection failed. Serial port is busy: {0}",
+ "disconnected": "Disconnected {0} from {1}.",
+ "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
+ "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
+ "reconnect": "Reconnecting {0} to {1} in {2} seconds..."
+ },
+ "component": {
+ "uninstall": "Uninstall",
+ "uninstallMsg": "Do you want to uninstall {0}?",
+ "by": "by",
+ "version": "Version {0}",
+ "moreInfo": "More info",
+ "install": "INSTALL",
+ "filterSearch": "Filter your search..."
+ },
+ "electron": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "unsavedChanges": "Any unsaved changes will not be saved."
+ },
+ "compile": {
+ "error": "Compilation error: {0}"
+ },
+ "upload": {
+ "error": "{0} error: {1}"
+ },
+ "burnBootloader": {
+ "error": "Error while burning the bootloader: {0}"
+ }
+ },
+ "theia": {
+ "core": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "offline": "Offline",
+ "daemonOffline": "CLI Daemon Offline",
+ "cannotConnectBackend": "Cannot connect to the backend.",
+ "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ },
+ "debug": {
+ "start": "Start...",
+ "typeNotSupported": "The debug session type \"{0}\" is not supported.",
+ "startError": "There was an error starting the debug session, check the logs for more details."
+ },
+ "editor": {
+ "unsavedTitle": "Unsaved – {0}"
+ },
+ "messages": {
+ "expand": "Expand",
+ "collapse": "Collapse"
+ },
+ "workspace": {
+ "fileNewName": "Name for new file",
+ "invalidFilename": "Invalid filename.",
+ "invalidExtension": ".{0} is not a valid extension",
+ "newFileName": "New name for file",
+ "deleteCurrentSketch": "Do you want to delete the current sketch?",
+ "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
+ }
+ },
+ "cloud": {
+ "GoToCloud": "GO TO CLOUD"
+ }
+}
diff --git a/i18n/it.json b/i18n/it.json
index 7acfa2b93..e809e7649 100644
--- a/i18n/it.json
+++ b/i18n/it.json
@@ -1,14 +1,14 @@
{
"arduino": {
"common": {
- "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.",
- "noBoardSelected": "No board selected",
- "selectedOn": "on {0}",
- "notConnected": "[not connected]",
+ "offlineIndicator": "Sembra che tu sia offline. Senza una connessione Internet, l'Arduino CLI potrebbe non essere in grado di scaricare le risorse richieste e potrebbe causare un malfunzionamento. Verificare la connessione a Internet e riavviare l'applicazione.",
+ "noBoardSelected": "Nessuna scheda selezionata",
+ "selectedOn": "su {0}",
+ "notConnected": "[non connesso]",
"serialMonitor": "Monitor seriale",
"oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?",
"later": "Later",
- "selectBoard": "Select Board",
+ "selectBoard": "Seleziona Scheda",
"unknown": "Unknown",
"processing": "Processing",
"saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
@@ -44,29 +44,29 @@
"auth.audience": "The OAuth2 audience.",
"auth.registerUri": "The URI used to register a new user.",
"network": "Rete",
- "sketchbook.location": "Sketchbook location",
+ "sketchbook.location": "Percorso della cartella degli sketch",
"browse": "Sfoglia",
"files.inside.sketches": "Show files inside Sketches",
- "editorFontSize": "Editor font size",
- "interfaceScale": "Interface scale",
- "showVerbose": "Show verbose output during",
- "compilerWarnings": "Compiler warnings",
+ "editorFontSize": "Dimensione del carattere dell'editor",
+ "interfaceScale": "Scalabilità dell'interfaccia",
+ "showVerbose": "Mostra un output dettagliato durante",
+ "compilerWarnings": "Warning del compilatore",
"automatic": "Automatico",
- "compile": "compile",
- "upload": "upload",
- "verifyAfterUpload": "Verify code after upload",
+ "compile": "compilazione",
+ "upload": "caricamento",
+ "verifyAfterUpload": "Verifica il codice dopo il caricamento",
"checkForUpdates": "Controlla aggiornamenti all'avvio",
"editorQuickSuggestions": "Editor Quick Suggestions",
"additionalManagerURLs": "URL aggiuntive per il Gestore schede",
- "noProxy": "No proxy",
- "manualProxy": "Manual proxy configuration",
+ "noProxy": "Nessun proxy",
+ "manualProxy": "Configurazione manuale del proxy",
"newSketchbookLocation": "Select new sketchbook location",
"choose": "Choose",
"enterAdditionalURLs": "Enter additional URLs, one for each row",
"unofficialBoardSupport": "Click for a list of unofficial board support URLs",
"invalid.sketchbook.location": "Invalid sketchbook location: {0}",
"invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
- "invalid.theme": "Invalid theme."
+ "invalid.theme": "Tema non valido"
},
"cloud": {
"signIn": "SIGN IN",
@@ -77,7 +77,7 @@
"link": "Link:",
"embed": "Embed:",
"cloudSketchbook": "Cloud Sketchbook",
- "shareSketch": "Share Sketch",
+ "shareSketch": "Condividi sketch",
"showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
"pullSketch": "Pull Sketch",
"openInCloudEditor": "Open in Cloud Editor",
@@ -168,7 +168,7 @@
"archiveSketch": "Archivia sketch",
"saveSketchAs": "Save sketch folder as...",
"createdArchive": "Created archive '{0}'.",
- "new": "New",
+ "new": "Nuovo",
"openRecent": "Open Recent",
"showFolder": "Show Sketch Folder",
"sketch": "Sketch",
@@ -182,10 +182,10 @@
"userFieldsNotFoundError": "Can't find user fields for connected board",
"doneUploading": "Done uploading.",
"configureAndUpload": "Configure And Upload",
- "verifyOrCompile": "Verify/Compile",
- "exportBinary": "Export Compiled Binary",
+ "verifyOrCompile": "Verifica/Compila",
+ "exportBinary": "Esporta sketch compilato",
"verify": "Verify",
- "doneCompiling": "Done compiling.",
+ "doneCompiling": "Compilazione completata.",
"couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
"openSketchInNewWindow": "Open Sketch in New Window",
"openFolder": "Open Folder",
@@ -207,7 +207,7 @@
"autoFormat": "Formattazione automatica"
},
"examples": {
- "menu": "Examples",
+ "menu": "Esempi",
"couldNotInitializeExamples": "Could not initialize built-in examples.",
"builtInExamples": "Esempi integrati",
"customLibrary": "Examples from Custom Libraries",
@@ -290,13 +290,13 @@
"unsavedChanges": "Any unsaved changes will not be saved."
},
"compile": {
- "error": "Compilation error: {0}"
+ "error": "Errore di compilazione: {0}"
},
"upload": {
"error": "{0} error: {1}"
},
"burnBootloader": {
- "error": "Error while burning the bootloader: {0}"
+ "error": "Errore durante la scrittura del bootloader: {0}"
}
},
"theia": {
diff --git a/i18n/ja.json b/i18n/ja.json
index d712fa7b1..2b40c248f 100644
--- a/i18n/ja.json
+++ b/i18n/ja.json
@@ -1,25 +1,25 @@
{
"arduino": {
"common": {
- "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.",
- "noBoardSelected": "No board selected",
+ "offlineIndicator": "オフラインのようです。 インターネットに接続していないと、Arduino CLIが必要なリソースをダウンロードできず、誤動作を引き起こす可能性があります。 インターネットに接続して、アプリケーションを再起動してください。",
+ "noBoardSelected": "ボード未選択",
"selectedOn": "on {0}",
- "notConnected": "[not connected]",
+ "notConnected": "[未接続]",
"serialMonitor": "シリアルモニタ",
"oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?",
"later": "Later",
- "selectBoard": "Select Board",
- "unknown": "Unknown",
+ "selectBoard": "ボードを選択",
+ "unknown": "不明",
"processing": "Processing",
- "saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
- "loseChanges": "If you don't save, your changes will be lost."
+ "saveChangesToSketch": "閉じる前に、このスケッチへの変更を保存しますか？",
+ "loseChanges": "保存しないと、変更が失われます。"
},
"menu": {
- "sketch": "スケッチ ",
+ "sketch": "スケッチ",
"tools": "ツール"
},
"debug": {
- "optimizeForDebugging": "Optimize for Debugging",
+ "optimizeForDebugging": "デバッグに最適化",
"debugWithMessage": "Debug - {0}",
"noPlatformInstalledFor": "Platform is not installed for '{0}'",
"debuggingNotSupported": "Debugging is not supported by '{0}'"
@@ -27,10 +27,10 @@
"preferences": {
"language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
"compile.verbose": "True for verbose compile output. False by default",
- "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
+ "compile.warnings": "使用する警告レベルをgccに指示します。デフォルトでは「なし」です。",
"upload.verbose": "True for verbose upload output. False by default.",
"window.autoScale": "True if the user interface automatically scales with the font size.",
- "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.",
+ "window.zoomLevel": "ウィンドウの拡大率を調整します。元のサイズは0で、数値を上（例：1）か下（例：-1）に変えるごとに20％拡大率が変わります。小数を入力して、拡大率をより細かく調整することもできます。",
"ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
"board.certificates": "List of certificates that can be uploaded to boards",
"sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
@@ -44,24 +44,24 @@
"auth.audience": "The OAuth2 audience.",
"auth.registerUri": "The URI used to register a new user.",
"network": "ネットワーク",
- "sketchbook.location": "Sketchbook location",
+ "sketchbook.location": "スケッチブックの場所",
"browse": "参照",
"files.inside.sketches": "Show files inside Sketches",
- "editorFontSize": "Editor font size",
- "interfaceScale": "Interface scale",
+ "editorFontSize": "エディターのフォントサイズ",
+ "interfaceScale": "インターフェイスのスケール",
"showVerbose": "Show verbose output during",
- "compilerWarnings": "Compiler warnings",
+ "compilerWarnings": "コンパイラの警告",
"automatic": "自動",
"compile": "compile",
- "upload": "upload",
+ "upload": "書き込み",
"verifyAfterUpload": "Verify code after upload",
"checkForUpdates": "起動時に最新バージョンの有無をチェックする",
- "editorQuickSuggestions": "Editor Quick Suggestions",
+ "editorQuickSuggestions": "エディターのクイックサジェスト",
"additionalManagerURLs": "追加のボードマネージャのURL",
- "noProxy": "No proxy",
- "manualProxy": "Manual proxy configuration",
- "newSketchbookLocation": "Select new sketchbook location",
- "choose": "Choose",
+ "noProxy": "プロキシなし",
+ "manualProxy": "手動プロキシ設定",
+ "newSketchbookLocation": "新しいスケッチブックの場所を選択",
+ "choose": "選択",
"enterAdditionalURLs": "Enter additional URLs, one for each row",
"unofficialBoardSupport": "Click for a list of unofficial board support URLs",
"invalid.sketchbook.location": "Invalid sketchbook location: {0}",
@@ -69,20 +69,20 @@
"invalid.theme": "Invalid theme."
},
"cloud": {
- "signIn": "SIGN IN",
- "signOut": "Sign Out",
+ "signIn": "サインイン",
+ "signOut": "サインアウト",
"chooseSketchVisibility": "Choose visibility of your Sketch:",
"privateVisibility": "Private. Only you can view the Sketch.",
"publicVisibility": "Public. Anyone with the link can view the Sketch.",
"link": "Link:",
"embed": "Embed:",
- "cloudSketchbook": "Cloud Sketchbook",
- "shareSketch": "Share Sketch",
+ "cloudSketchbook": "クラウドスケッチブック",
+ "shareSketch": "スケッチを共有",
"showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
"pullSketch": "Pull Sketch",
- "openInCloudEditor": "Open in Cloud Editor",
- "options": "Options...",
- "share": "Share...",
+ "openInCloudEditor": "クラウドエディタで開く",
+ "options": "オプション…",
+ "share": "共有...",
"remote": "Remote",
"emptySketchbook": "Your Sketchbook is empty",
"visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
@@ -90,23 +90,23 @@
"syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
"learnMore": "Learn more",
"continue": "Continue",
- "pushSketch": "Push Sketch",
+ "pushSketch": "スケッチをプッシュする",
"pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
- "pull": "Pull",
+ "pull": "プル",
"pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
"donePulling": "Done pulling ‘{0}’.",
"notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
- "push": "Push",
+ "push": "プッシュ",
"pullFirst": "You have to pull first to be able to push to the Cloud.",
"donePushing": "Done pushing ‘{0}’.",
- "connected": "Connected",
- "offline": "Offline",
+ "connected": "接続済み",
+ "offline": "オフライン",
"profilePicture": "Profile picture"
},
"board": {
"installManually": "Install Manually",
"installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
- "configDialogTitle": "Select Other Board & Port",
+ "configDialogTitle": "他のボードとポートを選択",
"configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
"configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
"pleasePickBoard": "Please pick a board connected to the port you have selected.",
@@ -127,7 +127,7 @@
"boardInfo": "ボード情報",
"board": "Board{0}",
"port": "Port{0}",
- "getBoardInfo": "Get Board Info",
+ "getBoardInfo": "ボード情報を取得",
"inSketchbook": " (in Sketchbook)"
},
"boardsManager": "ボードマネージャ",
@@ -143,16 +143,16 @@
"replaceMsg": "Replace the existing version of {0}?",
"library": {
"addZip": ".ZIP形式のライブラリをインストール...",
- "zipLibrary": "Library",
+ "zipLibrary": "ライブラリ",
"overwriteExistingLibrary": "Do you want to overwrite the existing library?",
"successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
"namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
"libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
- "include": "Include Library",
- "manageLibraries": "Manage Libraries...",
+ "include": "ライブラリをインクルード",
+ "manageLibraries": "ライブラリを管理...",
"arduinoLibraries": "Arduino libraries",
"contributedLibraries": "Contributed libraries",
- "title": "Library Manager",
+ "title": "ライブラリマネージャー",
"needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
"needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
"installOneMissingDependency": "Would you like to install the missing dependency?",
@@ -169,18 +169,18 @@
"saveSketchAs": "Save sketch folder as...",
"createdArchive": "Created archive '{0}'.",
"new": "New",
- "openRecent": "Open Recent",
+ "openRecent": "最近使った項目を開く",
"showFolder": "Show Sketch Folder",
"sketch": "Sketch",
"moving": "Moving",
"movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
"cantOpen": "「{0}」というフォルダはすでに存在します。スケッチを開けません。",
"saveFolderAs": "Save sketch folder as...",
- "sketchbook": "Sketchbook",
+ "sketchbook": "スケッチブック",
"upload": "Upload",
- "uploadUsingProgrammer": "Upload Using Programmer",
+ "uploadUsingProgrammer": "書き込み装置を使って書き込む",
"userFieldsNotFoundError": "Can't find user fields for connected board",
- "doneUploading": "Done uploading.",
+ "doneUploading": "書き込み完了",
"configureAndUpload": "Configure And Upload",
"verifyOrCompile": "Verify/Compile",
"exportBinary": "Export Compiled Binary",
diff --git a/i18n/ne.json b/i18n/ne.json
new file mode 100644
index 000000000..459770646
--- /dev/null
+++ b/i18n/ne.json
@@ -0,0 +1,334 @@
+{
+ "arduino": {
+ "common": {
+ "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.",
+ "noBoardSelected": "No board selected",
+ "selectedOn": "on {0}",
+ "notConnected": "[not connected]",
+ "serialMonitor": "Serial Monitor",
+ "oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?",
+ "later": "Later",
+ "selectBoard": "Select Board",
+ "unknown": "Unknown",
+ "processing": "Processing",
+ "saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
+ "loseChanges": "If you don't save, your changes will be lost."
+ },
+ "menu": {
+ "sketch": "Sketch",
+ "tools": "Tools"
+ },
+ "debug": {
+ "optimizeForDebugging": "Optimize for Debugging",
+ "debugWithMessage": "Debug - {0}",
+ "noPlatformInstalledFor": "Platform is not installed for '{0}'",
+ "debuggingNotSupported": "Debugging is not supported by '{0}'"
+ },
+ "preferences": {
+ "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
+ "compile.verbose": "True for verbose compile output. False by default",
+ "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
+ "upload.verbose": "True for verbose upload output. False by default.",
+ "window.autoScale": "True if the user interface automatically scales with the font size.",
+ "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.",
+ "ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
+ "board.certificates": "List of certificates that can be uploaded to boards",
+ "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
+ "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
+ "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
+ "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
+ "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
+ "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
+ "auth.clientID": "The OAuth2 client ID.",
+ "auth.domain": "The OAuth2 domain.",
+ "auth.audience": "The OAuth2 audience.",
+ "auth.registerUri": "The URI used to register a new user.",
+ "network": "Network",
+ "sketchbook.location": "Sketchbook location",
+ "browse": "Browse",
+ "files.inside.sketches": "Show files inside Sketches",
+ "editorFontSize": "Editor font size",
+ "interfaceScale": "Interface scale",
+ "showVerbose": "Show verbose output during",
+ "compilerWarnings": "Compiler warnings",
+ "automatic": "Automatic",
+ "compile": "compile",
+ "upload": "upload",
+ "verifyAfterUpload": "Verify code after upload",
+ "checkForUpdates": "Check for updates on startup",
+ "editorQuickSuggestions": "Editor Quick Suggestions",
+ "additionalManagerURLs": "Additional Boards Manager URLs",
+ "noProxy": "No proxy",
+ "manualProxy": "Manual proxy configuration",
+ "newSketchbookLocation": "Select new sketchbook location",
+ "choose": "Choose",
+ "enterAdditionalURLs": "Enter additional URLs, one for each row",
+ "unofficialBoardSupport": "Click for a list of unofficial board support URLs",
+ "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
+ "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
+ "invalid.theme": "Invalid theme."
+ },
+ "cloud": {
+ "signIn": "SIGN IN",
+ "signOut": "Sign Out",
+ "chooseSketchVisibility": "Choose visibility of your Sketch:",
+ "privateVisibility": "Private. Only you can view the Sketch.",
+ "publicVisibility": "Public. Anyone with the link can view the Sketch.",
+ "link": "Link:",
+ "embed": "Embed:",
+ "cloudSketchbook": "Cloud Sketchbook",
+ "shareSketch": "Share Sketch",
+ "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
+ "pullSketch": "Pull Sketch",
+ "openInCloudEditor": "Open in Cloud Editor",
+ "options": "Options...",
+ "share": "Share...",
+ "remote": "Remote",
+ "emptySketchbook": "Your Sketchbook is empty",
+ "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
+ "signInToCloud": "Sign in to Arduino Cloud",
+ "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
+ "learnMore": "Learn more",
+ "continue": "Continue",
+ "pushSketch": "Push Sketch",
+ "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
+ "pull": "Pull",
+ "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
+ "donePulling": "Done pulling ‘{0}’.",
+ "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
+ "push": "Push",
+ "pullFirst": "You have to pull first to be able to push to the Cloud.",
+ "donePushing": "Done pushing ‘{0}’.",
+ "connected": "Connected",
+ "offline": "Offline",
+ "profilePicture": "Profile picture"
+ },
+ "board": {
+ "installManually": "Install Manually",
+ "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
+ "configDialogTitle": "Select Other Board & Port",
+ "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
+ "configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
+ "pleasePickBoard": "Please pick a board connected to the port you have selected.",
+ "showAllAvailablePorts": "Shows all available ports when enabled",
+ "programmer": "Programmer",
+ "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
+ "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}",
+ "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
+ "reselectLater": "Reselect later",
+ "noneSelected": "No boards selected.",
+ "noPortsSelected": "No ports selected for board: '{0}'.",
+ "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
+ "openBoardsConfig": "Select other board and port…",
+ "boardListItem": "{0} at {1}",
+ "selectBoardForInfo": "Please select a board to obtain board info.",
+ "platformMissing": "The platform for the selected '{0}' board is not installed.",
+ "selectPortForInfo": "Please select a port to obtain board info.",
+ "boardInfo": "Board Info",
+ "board": "Board{0}",
+ "port": "Port{0}",
+ "getBoardInfo": "Get Board Info",
+ "inSketchbook": " (in Sketchbook)"
+ },
+ "boardsManager": "Boards Manager",
+ "about": {
+ "label": "About {0}",
+ "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
+ },
+ "contributions": {
+ "addFile": "Add File",
+ "replaceTitle": "Replace",
+ "fileAdded": "One file added to the sketch."
+ },
+ "replaceMsg": "Replace the existing version of {0}?",
+ "library": {
+ "addZip": "Add .ZIP Library...",
+ "zipLibrary": "Library",
+ "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
+ "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
+ "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
+ "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
+ "include": "Include Library",
+ "manageLibraries": "Manage Libraries...",
+ "arduinoLibraries": "Arduino libraries",
+ "contributedLibraries": "Contributed libraries",
+ "title": "Library Manager",
+ "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
+ "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
+ "installOneMissingDependency": "Would you like to install the missing dependency?",
+ "installMissingDependencies": "Would you like to install all the missing dependencies?",
+ "dependenciesForLibrary": "Dependencies for library {0}:{1}",
+ "installAll": "Install all",
+ "installOnly": "Install {0} only",
+ "installedSuccessfully": "Successfully installed library {0}:{1}",
+ "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}"
+ },
+ "selectZip": "Select a zip file containing the library you'd like to add",
+ "sketch": {
+ "archiveSketch": "Archive Sketch",
+ "saveSketchAs": "Save sketch folder as...",
+ "createdArchive": "Created archive '{0}'.",
+ "new": "New",
+ "openRecent": "Open Recent",
+ "showFolder": "Show Sketch Folder",
+ "sketch": "Sketch",
+ "moving": "Moving",
+ "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
+ "cantOpen": "A folder named \"{0}\" already exists. Can't open sketch.",
+ "saveFolderAs": "Save sketch folder as...",
+ "sketchbook": "Sketchbook",
+ "upload": "Upload",
+ "uploadUsingProgrammer": "Upload Using Programmer",
+ "userFieldsNotFoundError": "Can't find user fields for connected board",
+ "doneUploading": "Done uploading.",
+ "configureAndUpload": "Configure And Upload",
+ "verifyOrCompile": "Verify/Compile",
+ "exportBinary": "Export Compiled Binary",
+ "verify": "Verify",
+ "doneCompiling": "Done compiling.",
+ "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
+ "openSketchInNewWindow": "Open Sketch in New Window",
+ "openFolder": "Open Folder",
+ "titleLocalSketchbook": "Local Sketchbook",
+ "titleSketchbook": "Sketchbook",
+ "close": "Are you sure you want to close the sketch?"
+ },
+ "bootloader": {
+ "burnBootloader": "Burn Bootloader",
+ "doneBurningBootloader": "Done burning bootloader."
+ },
+ "editor": {
+ "copyForForum": "Copy for Forum (Markdown)",
+ "commentUncomment": "Comment/Uncomment",
+ "increaseIndent": "Increase Indent",
+ "decreaseIndent": "Decrease Indent",
+ "increaseFontSize": "Increase Font Size",
+ "decreaseFontSize": "Decrease Font Size",
+ "autoFormat": "Auto Format"
+ },
+ "examples": {
+ "menu": "Examples",
+ "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "builtInExamples": "Built-in examples",
+ "customLibrary": "Examples from Custom Libraries",
+ "for": "Examples for {0}",
+ "forAny": "Examples for any board"
+ },
+ "help": {
+ "search": "Search on Arduino.cc",
+ "keyword": "Type a keyword",
+ "gettingStarted": "Getting Started",
+ "environment": "Environment",
+ "troubleshooting": "Troubleshooting",
+ "reference": "Reference",
+ "findInReference": "Find in Reference",
+ "faq": "Frequently Asked Questions",
+ "visit": "Visit Arduino.cc"
+ },
+ "certificate": {
+ "uploadRootCertificates": "Upload SSL Root Certificates",
+ "openContext": "Open context",
+ "remove": "Remove",
+ "upload": "Upload",
+ "addURL": "Add URL to fetch SSL certificate",
+ "enterURL": "Enter URL",
+ "selectCertificateToUpload": "1. Select certificate to upload",
+ "addNew": "Add New",
+ "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
+ "uploadingCertificates": "Uploading certificates.",
+ "certificatesUploaded": "Certificates uploaded.",
+ "uploadFailed": "Upload failed. Please try again.",
+ "selectBoard": "Select a board...",
+ "boardAtPort": "{0} at {1}",
+ "noSupportedBoardConnected": "No supported board connected"
+ },
+ "firmware": {
+ "updater": "WiFi101 / WiFiNINA Firmware Updater",
+ "selectBoard": "Select Board",
+ "checkUpdates": "Check Updates",
+ "selectVersion": "Select firmware version",
+ "install": "Install",
+ "overwriteSketch": "Installation will overwrite the Sketch on the board.",
+ "installingFirmware": "Installing firmware.",
+ "successfullyInstalled": "Firmware succesfully installed.",
+ "failedInstall": "Installation failed. Please try again."
+ },
+ "dialog": {
+ "dontAskAgain": "Don't ask again"
+ },
+ "userFields": {
+ "cancel": "Cancel",
+ "upload": "Upload"
+ },
+ "serial": {
+ "toggleTimestamp": "Toggle Timestamp",
+ "autoscroll": "Autoscroll",
+ "timestamp": "Timestamp",
+ "noLineEndings": "No Line Ending",
+ "newLine": "New Line",
+ "carriageReturn": "Carriage Return",
+ "newLineCarriageReturn": "Both NL & CR",
+ "notConnected": "Not connected. Select a board and a port to connect automatically.",
+ "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
+ "connectionBusy": "Connection failed. Serial port is busy: {0}",
+ "disconnected": "Disconnected {0} from {1}.",
+ "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
+ "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
+ "reconnect": "Reconnecting {0} to {1} in {2} seconds..."
+ },
+ "component": {
+ "uninstall": "Uninstall",
+ "uninstallMsg": "Do you want to uninstall {0}?",
+ "by": "by",
+ "version": "Version {0}",
+ "moreInfo": "More info",
+ "install": "INSTALL",
+ "filterSearch": "Filter your search..."
+ },
+ "electron": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "unsavedChanges": "Any unsaved changes will not be saved."
+ },
+ "compile": {
+ "error": "Compilation error: {0}"
+ },
+ "upload": {
+ "error": "{0} error: {1}"
+ },
+ "burnBootloader": {
+ "error": "Error while burning the bootloader: {0}"
+ }
+ },
+ "theia": {
+ "core": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "offline": "Offline",
+ "daemonOffline": "CLI Daemon Offline",
+ "cannotConnectBackend": "Cannot connect to the backend.",
+ "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ },
+ "debug": {
+ "start": "Start...",
+ "typeNotSupported": "The debug session type \"{0}\" is not supported.",
+ "startError": "There was an error starting the debug session, check the logs for more details."
+ },
+ "editor": {
+ "unsavedTitle": "Unsaved – {0}"
+ },
+ "messages": {
+ "expand": "Expand",
+ "collapse": "Collapse"
+ },
+ "workspace": {
+ "fileNewName": "Name for new file",
+ "invalidFilename": "Invalid filename.",
+ "invalidExtension": ".{0} is not a valid extension",
+ "newFileName": "New name for file",
+ "deleteCurrentSketch": "Do you want to delete the current sketch?",
+ "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
+ }
+ },
+ "cloud": {
+ "GoToCloud": "GO TO CLOUD"
+ }
+}
diff --git a/i18n/pl.json b/i18n/pl.json
new file mode 100644
index 000000000..ba21c602a
--- /dev/null
+++ b/i18n/pl.json
@@ -0,0 +1,334 @@
+{
+ "arduino": {
+ "common": {
+ "offlineIndicator": "Wygląda na to, że jesteś w trybie offline. Bez połączenia z Internetem Arduino CLI może nie być w stanie pobrać wymaganych zasobów i może spowodować awarię. Połącz się z Internetem i uruchom ponownie aplikację.",
+ "noBoardSelected": "Nie wybrano płytki",
+ "selectedOn": "on {0}",
+ "notConnected": "[nie podłączone]",
+ "serialMonitor": "Serial Monitor",
+ "oldFormat": "'{0}' nadal używa starego formatu `.pde`. Czy chcesz się przełączyć na nowe rozszerzenie `.ino`?",
+ "later": "Później",
+ "selectBoard": "Wybierz płytkę",
+ "unknown": "Nieznany",
+ "processing": "Przetwarzanie",
+ "saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
+ "loseChanges": "Jeśli nie zapiszesz, zmiany zostaną utracone."
+ },
+ "menu": {
+ "sketch": "Sketch",
+ "tools": "Narzędzia"
+ },
+ "debug": {
+ "optimizeForDebugging": "Optymalizuj pod kątem debugowania",
+ "debugWithMessage": "Debug - {0}",
+ "noPlatformInstalledFor": "Platforma nie jest zainstalowana dla '{0}'",
+ "debuggingNotSupported": "Debugging is not supported by '{0}'"
+ },
+ "preferences": {
+ "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
+ "compile.verbose": "True for verbose compile output. False by default",
+ "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
+ "upload.verbose": "True for verbose upload output. False by default.",
+ "window.autoScale": "Prawda, jeśli interfejs użytkownika skaluje się automatycznie z rozmiarem czcionki.",
+ "window.zoomLevel": "Dostosuj poziom powiększenia okna. Oryginalny rozmiar to 0, a każdy przyrost powyżej (np. 1) lub poniżej (np. -1) oznacza odpowiednio powiększenie lub pomniejszenie o 20%. Możesz również wprowadzić ułamki dziesiętne, aby dostosować poziom powiększenia z większą dokładnością.",
+ "ide.autoUpdate": "Prawda, aby włączyć automatyczne sprawdzanie aktualizacji. IDE będzie automatycznie i okresowo sprawdzać dostępność aktualizacji.",
+ "board.certificates": "Lista certyfikatów, które można przesłać do płytki",
+ "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
+ "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
+ "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
+ "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
+ "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
+ "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
+ "auth.clientID": "The OAuth2 client ID.",
+ "auth.domain": "The OAuth2 domain.",
+ "auth.audience": "The OAuth2 audience.",
+ "auth.registerUri": "Identyfikator URI używany do zarejestrowania nowego użytkownika.",
+ "network": "Sieć",
+ "sketchbook.location": "Sketchbook location",
+ "browse": "Przeglądaj",
+ "files.inside.sketches": "Show files inside Sketches",
+ "editorFontSize": "Rozmiar czcionki edytora",
+ "interfaceScale": "Skalowanie interfejsu",
+ "showVerbose": "Show verbose output during",
+ "compilerWarnings": "Ostrzeżenia kompilatora",
+ "automatic": "Automatyczne",
+ "compile": "kompilacja",
+ "upload": "przesyłanie",
+ "verifyAfterUpload": "Weryfikuj kod po przesłaniu",
+ "checkForUpdates": "Sprawdź aktualizacje podczas uruchamiania",
+ "editorQuickSuggestions": "Editor Quick Suggestions",
+ "additionalManagerURLs": "Additional Boards Manager URLs",
+ "noProxy": "No proxy",
+ "manualProxy": "Konfiguracja ręczna proxy",
+ "newSketchbookLocation": "Select new sketchbook location",
+ "choose": "Choose",
+ "enterAdditionalURLs": "Wprowadź dodatkowe adresy URL, po jednym adresie w wierszu",
+ "unofficialBoardSupport": "Click for a list of unofficial board support URLs",
+ "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
+ "invalid.editorFontSize": "Nieprawidłowy rozmiar czcionki edytora. Musi to być dodatnia liczba całkowita.",
+ "invalid.theme": "Invalid theme."
+ },
+ "cloud": {
+ "signIn": "ZALOGUJ SIĘ",
+ "signOut": "Wyloguj się",
+ "chooseSketchVisibility": "Choose visibility of your Sketch:",
+ "privateVisibility": "Private. Only you can view the Sketch.",
+ "publicVisibility": "Public. Anyone with the link can view the Sketch.",
+ "link": "Link:",
+ "embed": "Embed:",
+ "cloudSketchbook": "Cloud Sketchbook",
+ "shareSketch": "Share Sketch",
+ "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
+ "pullSketch": "Pull Sketch",
+ "openInCloudEditor": "Otwórz w Cloud Editor",
+ "options": "Opcje...",
+ "share": "Share...",
+ "remote": "Remote",
+ "emptySketchbook": "Your Sketchbook is empty",
+ "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
+ "signInToCloud": "Zaloguj się do Arduino Cloud",
+ "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
+ "learnMore": "Dowiedz się więcej",
+ "continue": "Kontynuuj",
+ "pushSketch": "Push Sketch",
+ "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
+ "pull": "Zaciągnij",
+ "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
+ "donePulling": "Zakończono zaciąganie ‘{0}’.",
+ "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
+ "push": "Wypchnij",
+ "pullFirst": "You have to pull first to be able to push to the Cloud.",
+ "donePushing": "Done pushing ‘{0}’.",
+ "connected": "Połączony",
+ "offline": "Offline",
+ "profilePicture": "Obrazek profilowy"
+ },
+ "board": {
+ "installManually": "Zainstaluj ręcznie",
+ "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
+ "configDialogTitle": "Wybierz inną płytkę i port",
+ "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
+ "configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
+ "pleasePickBoard": "Wybierz płytkę podłączoną do wybranego portu.",
+ "showAllAvailablePorts": "Po włączeniu pokazuje wszystkie dostępne porty",
+ "programmer": "Programator",
+ "succesfullyInstalledPlatform": "Pomyślnie zainstalowano platformę {0}:{1}",
+ "succesfullyUninstalledPlatform": "Pomyślnie odinstalowano platformę {0}:{1}",
+ "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
+ "reselectLater": "Reselect later",
+ "noneSelected": "Nie wybrano płytki.",
+ "noPortsSelected": "Nie wybrano portu dla płytki: '{0}'.",
+ "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
+ "openBoardsConfig": "Wybierz inną płytkę i port...",
+ "boardListItem": "{0} w {1}",
+ "selectBoardForInfo": "Wybierz płytkę, aby uzyskać o niej informacje.",
+ "platformMissing": "Platforma dla wybranej płytki '{0}' nie jest zainstalowana.",
+ "selectPortForInfo": "Wybierz port, aby uzyskać informacje o płytce.",
+ "boardInfo": "Informacje o płytce",
+ "board": "Płytka{0}",
+ "port": "Port{0}",
+ "getBoardInfo": "Pobierz informacje o płytce",
+ "inSketchbook": " (in Sketchbook)"
+ },
+ "boardsManager": "Boards Manager",
+ "about": {
+ "label": "O {0}",
+ "detail": "Wersja: {0}\nData: {1}{2}\nWersja CLI: {3}{4} [{5}]\n\n{6}"
+ },
+ "contributions": {
+ "addFile": "Dodaj plik",
+ "replaceTitle": "Zamień",
+ "fileAdded": "One file added to the sketch."
+ },
+ "replaceMsg": "Czy zamienić istniejącą wersję {0}?",
+ "library": {
+ "addZip": "Dodaj bibliotekę .ZIP...",
+ "zipLibrary": "Biblioteka",
+ "overwriteExistingLibrary": "Czy chcesz nadpisać istniejącą bibliotekę?",
+ "successfullyInstalledZipLibrary": "Pomyślnie zainstalowano bibliotekę z archiwum {0}",
+ "namedLibraryAlreadyExists": "Folder biblioteki o nazwie {0} już istnieje. Czy chcesz go nadpisać?",
+ "libraryAlreadyExists": "Biblioteka już istnieje. Czy chcesz ją nadpisać?",
+ "include": "Dołącz bibliotekę",
+ "manageLibraries": "Zarządzaj bibliotekami...",
+ "arduinoLibraries": "Biblioteki Arduino",
+ "contributedLibraries": "Contributed libraries",
+ "title": "Library Manager",
+ "needsOneDependency": "Biblioteka {0}:{1} wymaga innej zależności, która obecnie nie jest zainstalowana:",
+ "needsMultipleDependencies": "Biblioteka {0}:{1} wymaga innych zależności, które obecnie nie są zainstalowane:",
+ "installOneMissingDependency": "Czy chcesz zainstalować brakującą zależność?",
+ "installMissingDependencies": "Czy chcesz zainstalować wszystkie brakujące zależności?",
+ "dependenciesForLibrary": "Zależności dla biblioteki {0}:{1}",
+ "installAll": "Zainstaluj wszystko",
+ "installOnly": "Zainstaluj tylko {0}",
+ "installedSuccessfully": "Pomyślnie zainstalowano bibliotekę {0}:{1}",
+ "uninstalledSuccessfully": "Pomyślnie odinstalowano bibliotekę {0}:{1}"
+ },
+ "selectZip": "Wybierz plik ZIP zawierający bibliotekę, którą chcesz dodać",
+ "sketch": {
+ "archiveSketch": "Archive Sketch",
+ "saveSketchAs": "Save sketch folder as...",
+ "createdArchive": "Created archive '{0}'.",
+ "new": "Nowy",
+ "openRecent": "Otwórz ostatnie",
+ "showFolder": "Show Sketch Folder",
+ "sketch": "Sketch",
+ "moving": "Moving",
+ "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
+ "cantOpen": "A folder named \"{0}\" already exists. Can't open sketch.",
+ "saveFolderAs": "Save sketch folder as...",
+ "sketchbook": "Sketchbook",
+ "upload": "Prześlij",
+ "uploadUsingProgrammer": "Prześlij używając programatora",
+ "userFieldsNotFoundError": "Can't find user fields for connected board",
+ "doneUploading": "Przesyłanie zakończone.",
+ "configureAndUpload": "Configure And Upload",
+ "verifyOrCompile": "Weryfikuj/Kompiluj",
+ "exportBinary": "Export Compiled Binary",
+ "verify": "Weryfikuj",
+ "doneCompiling": "Kompilacja zakończona.",
+ "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
+ "openSketchInNewWindow": "Open Sketch in New Window",
+ "openFolder": "Otwórz folder",
+ "titleLocalSketchbook": "Local Sketchbook",
+ "titleSketchbook": "Sketchbook",
+ "close": "Are you sure you want to close the sketch?"
+ },
+ "bootloader": {
+ "burnBootloader": "Burn Bootloader",
+ "doneBurningBootloader": "Done burning bootloader."
+ },
+ "editor": {
+ "copyForForum": "Copy for Forum (Markdown)",
+ "commentUncomment": "Zakomentuj/Odkomentuj",
+ "increaseIndent": "Zwiększ wcięcie",
+ "decreaseIndent": "Zmniejsz wcięcie",
+ "increaseFontSize": "Zwiększ rozmiar czcionki",
+ "decreaseFontSize": "Zmniejsz rozmiar czcionki",
+ "autoFormat": "Automatyczne formatowanie"
+ },
+ "examples": {
+ "menu": "Przykłady",
+ "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "builtInExamples": "Wbudowane przykłady",
+ "customLibrary": "Examples from Custom Libraries",
+ "for": "Przykłady dla {0}",
+ "forAny": "Przykłady dla dowolnej płytki"
+ },
+ "help": {
+ "search": "Szukaj na Arduino.cc",
+ "keyword": "Wpisz słowo kluczowe",
+ "gettingStarted": "Getting Started",
+ "environment": "Środowisko",
+ "troubleshooting": "Rozwiązywanie problemów",
+ "reference": "Reference",
+ "findInReference": "Find in Reference",
+ "faq": "Najczęściej zadawane pytania",
+ "visit": "Odwiedź Arduino.cc"
+ },
+ "certificate": {
+ "uploadRootCertificates": "Upload SSL Root Certificates",
+ "openContext": "Open context",
+ "remove": "Usuń",
+ "upload": "Prześlij",
+ "addURL": "Dodaj adres URL, aby pobrać certyfikat SSL",
+ "enterURL": "Wprowadź adres URL",
+ "selectCertificateToUpload": "1. Wybierz certyfikat do przesłania",
+ "addNew": "Dodaj nowy",
+ "selectDestinationBoardToUpload": "2. Wybierz docelową płytkę i prześli certyfikat",
+ "uploadingCertificates": "Przesyłanie certyfikatów.",
+ "certificatesUploaded": "Certyfikaty przesłane.",
+ "uploadFailed": "Przesyłanie nie powiodło się. Spróbuj ponownie.",
+ "selectBoard": "Wybierz płytkę...",
+ "boardAtPort": "{0} at {1}",
+ "noSupportedBoardConnected": "No supported board connected"
+ },
+ "firmware": {
+ "updater": "WiFi101 / WiFiNINA Firmware Updater",
+ "selectBoard": "Wybierz płytkę",
+ "checkUpdates": "Sprawdź uaktualnienia",
+ "selectVersion": "Select firmware version",
+ "install": "Zainstaluj",
+ "overwriteSketch": "Installation will overwrite the Sketch on the board.",
+ "installingFirmware": "Installing firmware.",
+ "successfullyInstalled": "Firmware succesfully installed.",
+ "failedInstall": "Instalacja nie powiodła się. Spróbuj ponownie."
+ },
+ "dialog": {
+ "dontAskAgain": "Nie pytaj ponownie"
+ },
+ "userFields": {
+ "cancel": "Cancel",
+ "upload": "Prześlij"
+ },
+ "serial": {
+ "toggleTimestamp": "Toggle Timestamp",
+ "autoscroll": "Autoscroll",
+ "timestamp": "Timestamp",
+ "noLineEndings": "No Line Ending",
+ "newLine": "Nowa linia",
+ "carriageReturn": "Carriage Return",
+ "newLineCarriageReturn": "Both NL & CR",
+ "notConnected": "Not connected. Select a board and a port to connect automatically.",
+ "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
+ "connectionBusy": "Połączenie nie powiodło się. Port szeregowy jest zajęty: {0}",
+ "disconnected": "Disconnected {0} from {1}.",
+ "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
+ "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
+ "reconnect": "Reconnecting {0} to {1} in {2} seconds..."
+ },
+ "component": {
+ "uninstall": "Odinstaluj",
+ "uninstallMsg": "Czy chcesz odinstalować {0}?",
+ "by": "by",
+ "version": "Wersja {0}",
+ "moreInfo": "Więcej informacji",
+ "install": "ZAINSTALUJ",
+ "filterSearch": "Filter your search..."
+ },
+ "electron": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "unsavedChanges": "Any unsaved changes will not be saved."
+ },
+ "compile": {
+ "error": "Błąd kompilacji: {0}"
+ },
+ "upload": {
+ "error": "{0} error: {1}"
+ },
+ "burnBootloader": {
+ "error": "Error while burning the bootloader: {0}"
+ }
+ },
+ "theia": {
+ "core": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "offline": "Offline",
+ "daemonOffline": "CLI Daemon Offline",
+ "cannotConnectBackend": "Cannot connect to the backend.",
+ "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ },
+ "debug": {
+ "start": "Start...",
+ "typeNotSupported": "The debug session type \"{0}\" is not supported.",
+ "startError": "There was an error starting the debug session, check the logs for more details."
+ },
+ "editor": {
+ "unsavedTitle": "Unsaved – {0}"
+ },
+ "messages": {
+ "expand": "Rozwiń",
+ "collapse": "Zwiń"
+ },
+ "workspace": {
+ "fileNewName": "Nazwa nowego pliku",
+ "invalidFilename": "Nieprawidłowa nazwa pliku.",
+ "invalidExtension": ".{0} niw jest prawidłowym rozszerzeniem",
+ "newFileName": "Nowa nazwa pliku",
+ "deleteCurrentSketch": "Do you want to delete the current sketch?",
+ "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
+ }
+ },
+ "cloud": {
+ "GoToCloud": "GO TO CLOUD"
+ }
+}
diff --git a/i18n/pt.json b/i18n/pt.json
index 549bf2692..03fe3639a 100644
--- a/i18n/pt.json
+++ b/i18n/pt.json
@@ -1,334 +1,334 @@
{
"arduino": {
"common": {
- "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.",
- "noBoardSelected": "No board selected",
- "selectedOn": "on {0}",
- "notConnected": "[not connected]",
- "serialMonitor": "Monitor Série",
- "oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?",
- "later": "Later",
- "selectBoard": "Select Board",
- "unknown": "Unknown",
- "processing": "Processing",
- "saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
- "loseChanges": "If you don't save, your changes will be lost."
+ "offlineIndicator": "Você parece estar offline. Sem uma conexão com a Internet, a CLI do Arduino poderá não ser capaz de baixar os recursos necessários e poderá causar mau funcionamento. Conecte-se à Internet e reinicie o aplicativo.",
+ "noBoardSelected": "Nenhuma placa selecionada.",
+ "selectedOn": "em {0}",
+ "notConnected": "[não está conectado]",
+ "serialMonitor": "Monitor Serial",
+ "oldFormat": "O '{0}' ainda utiliza o formato antigo `.pde`. Deseja mudar para a nova extensão `.ino`?",
+ "later": "Depois",
+ "selectBoard": "Selecione a Placa",
+ "unknown": "Desconhecido",
+ "processing": "Processando",
+ "saveChangesToSketch": "Deseja salvar as alterações neste sketch antes de fechar?",
+ "loseChanges": "Se você não salvar, as alterações serão perdidas. "
},
"menu": {
"sketch": "Rascunho",
"tools": "Ferramentas"
},
"debug": {
- "optimizeForDebugging": "Optimize for Debugging",
- "debugWithMessage": "Debug - {0}",
- "noPlatformInstalledFor": "Platform is not installed for '{0}'",
- "debuggingNotSupported": "Debugging is not supported by '{0}'"
+ "optimizeForDebugging": "Otimizar para Depuração",
+ "debugWithMessage": "Depuração - {0}",
+ "noPlatformInstalledFor": "A plataforma não está instalada para '{0}'",
+ "debuggingNotSupported": "A depuração não é suportada por '{0}'"
},
"preferences": {
- "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
- "compile.verbose": "True for verbose compile output. False by default",
- "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
- "upload.verbose": "True for verbose upload output. False by default.",
- "window.autoScale": "True if the user interface automatically scales with the font size.",
- "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.",
- "ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
- "board.certificates": "List of certificates that can be uploaded to boards",
- "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
- "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
- "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
- "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
- "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
- "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
- "auth.clientID": "The OAuth2 client ID.",
- "auth.domain": "The OAuth2 domain.",
- "auth.audience": "The OAuth2 audience.",
- "auth.registerUri": "The URI used to register a new user.",
+ "language.log": "Verdadeiro se o Arduino Language Server deverá gerar arquivos de log na pasta do sketch. Caso contrário, falso. Falso é padrão.",
+ "compile.verbose": "Verdadeiro para saída de compilação detalhada. Falso é padrão",
+ "compile.warnings": "Diz ao gcc qual nível de aviso usar. 'Nenhum' é padrão",
+ "upload.verbose": "Verdadeiro para saída de upload detalhada. Falsa é padrão.",
+ "window.autoScale": "Verdadeiro se a interface do usuário for dimensionada automaticamente com o tamanho da fonte.",
+ "window.zoomLevel": "Ajuste o nível de zoom da janela. O tamanho original é 0 e cada incremento acima (por exemplo, 1) ou abaixo (por exemplo, -1) representa um zoom 20% maior ou menor. Você também pode inserir decimais para ajustar o nível de zoom para uma maior precisão.",
+ "ide.autoUpdate": "Verdadeiro para habilitar as verificações automáticas de atualização. A IDE verificará se há atualizações automáticas periodicamente.",
+ "board.certificates": "Lista de certificados que podem ser carregados nas placas",
+ "sketchbook.showAllFiles": "Verdadeiro para mostrar todos os arquivos de sketch dentro do sketch. Falso é padrão.",
+ "cloud.enabled": "Verdadeiro se as funções de sincronização de sketch estiverem ativadas. O padrão é verdadeiro.",
+ "cloud.pull.warn": "Verdadeiro se os usuários devem ser avisados antes de baixar um sketch da nuvem. O padrão é verdadeiro.",
+ "cloud.push.warn": "Verdadeiro se os usuários devem ser avisados antes de enviar um sketch para a nuvem. O padrão é verdadeiro.",
+ "cloud.pushpublic.warn": "Verdadeiro se os usuários devem ser avisados antes de enviar um sketch público para a nuvem. O padrão é verdadeiro.",
+ "cloud.sketchSyncEnpoint": "O endpoint usado para enviar e baixar os sketches de um backend. Por padrão, ele aponta para a Arduino Cloud API.",
+ "auth.clientID": "O ID do cliente OAuth2.",
+ "auth.domain": "O domínio do cliente OAuth2.",
+ "auth.audience": "O OAuth2 publico.",
+ "auth.registerUri": "A URI usada para registrar um novo usuário.",
"network": "Rede",
- "sketchbook.location": "Sketchbook location",
+ "sketchbook.location": "Localização dos Sketchbooks",
"browse": "Procurar",
- "files.inside.sketches": "Show files inside Sketches",
- "editorFontSize": "Editor font size",
- "interfaceScale": "Interface scale",
- "showVerbose": "Show verbose output during",
- "compilerWarnings": "Compiler warnings",
+ "files.inside.sketches": "Mostrar arquivos dentro dos Sketches",
+ "editorFontSize": "Tamanho da fonte do editor",
+ "interfaceScale": "Dimensões da interface",
+ "showVerbose": "Mostrar a saída detalhada durante",
+ "compilerWarnings": "Avisos do compilador",
"automatic": "Automático",
- "compile": "compile",
- "upload": "upload",
- "verifyAfterUpload": "Verify code after upload",
+ "compile": "compilar",
+ "upload": "enviar",
+ "verifyAfterUpload": "Verificar o código após enviar",
"checkForUpdates": "Procurar por atualizações ao iniciar",
- "editorQuickSuggestions": "Editor Quick Suggestions",
+ "editorQuickSuggestions": "Dicas do editor",
"additionalManagerURLs": "URLs Adicionais para Gerenciadores de Placas",
- "noProxy": "No proxy",
- "manualProxy": "Manual proxy configuration",
- "newSketchbookLocation": "Select new sketchbook location",
- "choose": "Choose",
- "enterAdditionalURLs": "Enter additional URLs, one for each row",
- "unofficialBoardSupport": "Click for a list of unofficial board support URLs",
- "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
- "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
- "invalid.theme": "Invalid theme."
+ "noProxy": "Sem proxy",
+ "manualProxy": "Configurações manuais de proxy",
+ "newSketchbookLocation": "Escolher",
+ "choose": "Escolher",
+ "enterAdditionalURLs": "Insira URLs adicionais, uma por linha",
+ "unofficialBoardSupport": "Clique para obter uma lista de URLs de placas não oficiais suportadas",
+ "invalid.sketchbook.location": "Localização inválida para o sketchbook: {0}",
+ "invalid.editorFontSize": "Tamanho da fonte do editor inválido. Deve ser um número inteiro positivo.",
+ "invalid.theme": "Tema inválido"
},
"cloud": {
- "signIn": "SIGN IN",
- "signOut": "Sign Out",
- "chooseSketchVisibility": "Choose visibility of your Sketch:",
- "privateVisibility": "Private. Only you can view the Sketch.",
- "publicVisibility": "Public. Anyone with the link can view the Sketch.",
- "link": "Link:",
- "embed": "Embed:",
- "cloudSketchbook": "Cloud Sketchbook",
- "shareSketch": "Share Sketch",
- "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
- "pullSketch": "Pull Sketch",
- "openInCloudEditor": "Open in Cloud Editor",
- "options": "Options...",
- "share": "Share...",
- "remote": "Remote",
- "emptySketchbook": "Your Sketchbook is empty",
- "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
- "signInToCloud": "Sign in to Arduino Cloud",
- "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
- "learnMore": "Learn more",
- "continue": "Continue",
- "pushSketch": "Push Sketch",
- "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
- "pull": "Pull",
- "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
- "donePulling": "Done pulling ‘{0}’.",
- "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
- "push": "Push",
- "pullFirst": "You have to pull first to be able to push to the Cloud.",
- "donePushing": "Done pushing ‘{0}’.",
- "connected": "Connected",
- "offline": "Offline",
- "profilePicture": "Profile picture"
+ "signIn": "ENTRAR",
+ "signOut": "Sair",
+ "chooseSketchVisibility": "Escolha a visibilidade do seu Sketch:",
+ "privateVisibility": "Privado. Só você poderá ver o Sketch.",
+ "publicVisibility": "Público. Qualquer pessoa com o link poderá visualizar o Sketch.",
+ "link": "Endereço",
+ "embed": "Embutir:",
+ "cloudSketchbook": "Sketchbook na nuvem",
+ "shareSketch": "Compartilhar Sketch",
+ "showHideRemoveSketchbook": "Exibir/Ocultar Sketchbook remoto",
+ "pullSketch": "Baixar Sketch",
+ "openInCloudEditor": "Abrir no Cloud Editor",
+ "options": "Opções...",
+ "share": "Compartilhar...",
+ "remote": "Remoto",
+ "emptySketchbook": "O seu Sketchbook está vazio",
+ "visitArduinoCloud": "Visite Arduino Cloud para criar Cloud Sketches.",
+ "signInToCloud": "Faça login no Arduino Cloud",
+ "syncEditSketches": "Sincronizar e editar seus Sketches no Arduino Cloud",
+ "learnMore": "Saiba mais",
+ "continue": "Continuar",
+ "pushSketch": "Enviar Sketch",
+ "pushSketchMsg": "Baixar",
+ "pull": "Baixar",
+ "pullSketchMsg": "Baixar este Sketch da nuvem irá sobrescrever sua versão local. Você tem certeza que deseja continuar?",
+ "donePulling": "Terminou de baixar '{0}'.",
+ "notYetPulled": "Não é possível enviar para a nuvem. Ainda não foi baixado.",
+ "push": "Enviar",
+ "pullFirst": "Você precisa baixar primeiro para poder enviar para a nuvem.",
+ "donePushing": "Concluído o envio de ‘{0}’.",
+ "connected": "Conectado",
+ "offline": "Desconectado",
+ "profilePicture": "Foto do perfil"
},
"board": {
- "installManually": "Install Manually",
- "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
- "configDialogTitle": "Select Other Board & Port",
- "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
- "configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
- "pleasePickBoard": "Please pick a board connected to the port you have selected.",
- "showAllAvailablePorts": "Shows all available ports when enabled",
- "programmer": "Programmer",
- "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
- "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}",
- "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
- "reselectLater": "Reselect later",
- "noneSelected": "No boards selected.",
- "noPortsSelected": "No ports selected for board: '{0}'.",
- "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
- "openBoardsConfig": "Select other board and port…",
- "boardListItem": "{0} at {1}",
- "selectBoardForInfo": "Please select a board to obtain board info.",
- "platformMissing": "The platform for the selected '{0}' board is not installed.",
- "selectPortForInfo": "Please select a port to obtain board info.",
+ "installManually": "Instalar Manualmente",
+ "installNow": "O núcleo \"{0} {1}\" deve ser instalado para a placa \"{2}\" atualmente selecionada. Quer instalar agora?",
+ "configDialogTitle": "Selecionar Outra Placa e Porta",
+ "configDialog1": "Selecione uma placa e uma porta se quiser fazer o upload de um sketch.",
+ "configDialog2": "Se você apenas selecionar a placa, poderá apenas compilar, mas não poderá fazer o upload de seu sketch.",
+ "pleasePickBoard": "Escolha uma placa conectada à porta que você selecionou.",
+ "showAllAvailablePorts": "Mostrar todas as portas disponíveis quando habilitado",
+ "programmer": "Programador/Gravador",
+ "succesfullyInstalledPlatform": "Plataforma instalada com sucesso {0}: {1}",
+ "succesfullyUninstalledPlatform": "Plataforma desinstalada com sucesso {0}: {1}",
+ "couldNotFindPreviouslySelected": "Não foi possível encontrar a placa selecionada anteriormente '{0}' na plataforma instalada '{1}'. Por favor, selecione novamente a placa que deseja usar. Você deseja selecioná-la novamente agora?",
+ "reselectLater": "Selecionar novamente mais tarde",
+ "noneSelected": "Nenhuma placa selecionada.",
+ "noPortsSelected": "Nenhuma porta selecionada para placa: '{0}'.",
+ "noFQBN": "O FQBN não está disponível para a placa selecionada \"{0}\". Você tem o núcleo correspondente instalado?",
+ "openBoardsConfig": "Selecione outra placa e porta...",
+ "boardListItem": "{0} de {1}",
+ "selectBoardForInfo": "Selecione uma placa para obter informações sobre ela.",
+ "platformMissing": "A plataforma para a placa '{0}' selecionada não está instalada.",
+ "selectPortForInfo": "Selecione uma porta para obter informações sobre a placa.",
"boardInfo": "Informações da Placa",
- "board": "Board{0}",
- "port": "Port{0}",
- "getBoardInfo": "Get Board Info",
- "inSketchbook": " (in Sketchbook)"
+ "board": "Placa{0}",
+ "port": "Porta{0}",
+ "getBoardInfo": "Obter Informações da Placa",
+ "inSketchbook": "(no Sketchbook)"
},
"boardsManager": "Gerenciador de Placas",
"about": {
- "label": "About {0}",
- "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
+ "label": "Sobre {0}",
+ "detail": "Versão: {0}\nData: {1}{2}\nVersão do CLI : {3}{4} [{5}]\n\n{6}"
},
"contributions": {
"addFile": "Adicionar Ficheiro...",
- "replaceTitle": "Replace",
- "fileAdded": "One file added to the sketch."
+ "replaceTitle": "Substituir",
+ "fileAdded": "Um arquivo adicionado ao sketch."
},
- "replaceMsg": "Replace the existing version of {0}?",
+ "replaceMsg": "Substituir a versão existente de {0}?",
"library": {
"addZip": "Adicionar biblioteca .ZIP...",
- "zipLibrary": "Library",
- "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
- "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
- "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
- "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
- "include": "Include Library",
- "manageLibraries": "Manage Libraries...",
- "arduinoLibraries": "Arduino libraries",
- "contributedLibraries": "Contributed libraries",
- "title": "Library Manager",
- "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
- "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
- "installOneMissingDependency": "Would you like to install the missing dependency?",
- "installMissingDependencies": "Would you like to install all the missing dependencies?",
- "dependenciesForLibrary": "Dependencies for library {0}:{1}",
- "installAll": "Install all",
- "installOnly": "Install {0} only",
- "installedSuccessfully": "Successfully installed library {0}:{1}",
- "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}"
+ "zipLibrary": "Biblioteca",
+ "overwriteExistingLibrary": "Você deseja sobrescrever a biblioteca existente?",
+ "successfullyInstalledZipLibrary": "Biblioteca instalada com sucesso do arquivo {0}",
+ "namedLibraryAlreadyExists": "Já existe uma pasta da biblioteca chamada {0}. Você deseja sobrescreve-la?",
+ "libraryAlreadyExists": "Essa biblioteca já existe. Você deseja sobrescreve-la?",
+ "include": "Adicionar Biblioteca",
+ "manageLibraries": "Gerenciar bibliotecas...",
+ "arduinoLibraries": "Bibliotecas Arduino",
+ "contributedLibraries": "Bibliotecas contribuídas",
+ "title": "Gerenciador de Bibliotecas",
+ "needsOneDependency": "A biblioteca {0}: {1} precisa de outra dependência que atualmente não está instalada:",
+ "needsMultipleDependencies": "A biblioteca {0}: {1} precisa de algumas outras dependências que atualmente não estão instaladas:",
+ "installOneMissingDependency": "Deseja instalar a dependência ausente?",
+ "installMissingDependencies": "Deseja instalar todas as dependências ausentes?",
+ "dependenciesForLibrary": "Dependências da biblioteca {0}: {1}",
+ "installAll": "Instalar tudo",
+ "installOnly": "Instalar apenas {0} ",
+ "installedSuccessfully": "Biblioteca instalada com sucesso {0}: {1}",
+ "uninstalledSuccessfully": "Biblioteca desinstalada com sucesso {0}: {1}"
},
- "selectZip": "Select a zip file containing the library you'd like to add",
+ "selectZip": "Selecione um arquivo zip contendo a biblioteca que deseja adicionar",
"sketch": {
"archiveSketch": "Arquivar Sketch",
- "saveSketchAs": "Save sketch folder as...",
- "createdArchive": "Created archive '{0}'.",
- "new": "New",
- "openRecent": "Open Recent",
- "showFolder": "Show Sketch Folder",
+ "saveSketchAs": "Salvar a pasta de sketch como...",
+ "createdArchive": "Arquivo criado '{0}'.",
+ "new": "Novo",
+ "openRecent": "Abrir Recente",
+ "showFolder": "Mostrar a pasta de Sketches",
"sketch": "Sketch",
- "moving": "Moving",
- "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
+ "moving": "Movendo",
+ "movingMsg": "O arquivo \"{0}\" deve estar dentro de uma pasta de sketch chamada \"{1}\".\nCriar esta pasta, mover o arquivo e continuar?",
"cantOpen": "Directoria chamada \"{0}\" já existe. Não é possível abrir o rascunho.",
- "saveFolderAs": "Save sketch folder as...",
+ "saveFolderAs": "Salvar a pasta de sketch como...",
"sketchbook": "Sketchbook",
- "upload": "Upload",
- "uploadUsingProgrammer": "Upload Using Programmer",
- "userFieldsNotFoundError": "Can't find user fields for connected board",
- "doneUploading": "Done uploading.",
- "configureAndUpload": "Configure And Upload",
- "verifyOrCompile": "Verify/Compile",
- "exportBinary": "Export Compiled Binary",
- "verify": "Verify",
- "doneCompiling": "Done compiling.",
- "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
- "openSketchInNewWindow": "Open Sketch in New Window",
- "openFolder": "Open Folder",
- "titleLocalSketchbook": "Local Sketchbook",
+ "upload": "Enviar usando Programador",
+ "uploadUsingProgrammer": "Enviar Usando Programador",
+ "userFieldsNotFoundError": "Não é possível encontrar dados de usuário para placa conectada",
+ "doneUploading": "Envio concluído.",
+ "configureAndUpload": "Configurar e Fazer Envio",
+ "verifyOrCompile": "Verificar/Compilar",
+ "exportBinary": "Exportar Binário Compilado",
+ "verify": "Verificar",
+ "doneCompiling": "Compilação concluída.",
+ "couldNotConnectToSerial": "Não foi possível reconectar à porta serial. {0}",
+ "openSketchInNewWindow": "Abrir sketch em uma nova janela",
+ "openFolder": "Abrir Pasta",
+ "titleLocalSketchbook": "Sketchbook Local",
"titleSketchbook": "Sketchbook",
- "close": "Are you sure you want to close the sketch?"
+ "close": "Tem certeza que deseja fechar o sketch?"
},
"bootloader": {
"burnBootloader": "Gravar bootloader",
- "doneBurningBootloader": "Done burning bootloader."
+ "doneBurningBootloader": "Feita a gravação do bootloader."
},
"editor": {
"copyForForum": "Copiar para o Fórum (Markdown)",
"commentUncomment": "Comentar/Eliminar Comentário",
- "increaseIndent": "Increase Indent",
- "decreaseIndent": "Decrease Indent",
- "increaseFontSize": "Increase Font Size",
+ "increaseIndent": "Aumentar Recuo",
+ "decreaseIndent": "Diminuir Recuo",
+ "increaseFontSize": "Aumentar o Tamanho da Fonte",
"decreaseFontSize": "Diminuir tamanho da fonte",
"autoFormat": "Autoformatação"
},
"examples": {
- "menu": "Examples",
- "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "menu": "Exemplos",
+ "couldNotInitializeExamples": "Não foi possível inicializar os exemplos integrados.",
"builtInExamples": "Exemplos Incluídos",
- "customLibrary": "Examples from Custom Libraries",
- "for": "Examples for {0}",
- "forAny": "Examples for any board"
+ "customLibrary": "Exemplos de Bibliotecas Customizadas",
+ "for": "Exemplos para {0}",
+ "forAny": "Exemplos para qualquer placa"
},
"help": {
- "search": "Search on Arduino.cc",
- "keyword": "Type a keyword",
- "gettingStarted": "Getting Started",
- "environment": "Environment",
- "troubleshooting": "Troubleshooting",
- "reference": "Reference",
- "findInReference": "Find in Reference",
- "faq": "Frequently Asked Questions",
- "visit": "Visit Arduino.cc"
+ "search": "Procurar no Arduino.cc",
+ "keyword": "Digite uma palavra-chave",
+ "gettingStarted": "Começando",
+ "environment": "Ambiente",
+ "troubleshooting": "Solução de problemas",
+ "reference": "Referência",
+ "findInReference": "Encontrar em Referência",
+ "faq": "Perguntas Frequentes",
+ "visit": "Visitar Arduino.cc"
},
"certificate": {
- "uploadRootCertificates": "Upload SSL Root Certificates",
- "openContext": "Open context",
- "remove": "Remove",
+ "uploadRootCertificates": "Enviar certificado Raiz SSL",
+ "openContext": "Abrir contexto",
+ "remove": "Remover",
"upload": "Carregar",
- "addURL": "Add URL to fetch SSL certificate",
- "enterURL": "Enter URL",
- "selectCertificateToUpload": "1. Select certificate to upload",
- "addNew": "Add New",
- "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
- "uploadingCertificates": "Uploading certificates.",
- "certificatesUploaded": "Certificates uploaded.",
- "uploadFailed": "Upload failed. Please try again.",
- "selectBoard": "Select a board...",
- "boardAtPort": "{0} at {1}",
- "noSupportedBoardConnected": "No supported board connected"
+ "addURL": "Adicionar URL para localizar o certificado SSL",
+ "enterURL": "Insira a URL",
+ "selectCertificateToUpload": "1. Selecione o certificado para fazer o envio",
+ "addNew": "Adicionar Novo",
+ "selectDestinationBoardToUpload": "2. Selecione a placa de destino e envie o certificado",
+ "uploadingCertificates": "Enviando certificados.",
+ "certificatesUploaded": "Certificados enviados.",
+ "uploadFailed": "O envio falhou. Por favor, tente novamente.",
+ "selectBoard": "Selecione uma placa...",
+ "boardAtPort": "{0} de {1}",
+ "noSupportedBoardConnected": "Nenhuma placa compatível conectada"
},
"firmware": {
- "updater": "WiFi101 / WiFiNINA Firmware Updater",
- "selectBoard": "Select Board",
- "checkUpdates": "Check Updates",
- "selectVersion": "Select firmware version",
+ "updater": "WiFi101 / WiFiNINA Atualizador de Firmware",
+ "selectBoard": "Selecionar Placa",
+ "checkUpdates": "Verificar Atualizações",
+ "selectVersion": "Selecione a versão do firmware",
"install": "Instalar",
- "overwriteSketch": "Installation will overwrite the Sketch on the board.",
- "installingFirmware": "Installing firmware.",
- "successfullyInstalled": "Firmware succesfully installed.",
- "failedInstall": "Installation failed. Please try again."
+ "overwriteSketch": "A instalação substituirá o sketch na placa.",
+ "installingFirmware": "Instalando firmware.",
+ "successfullyInstalled": "Firmware instalado com sucesso.",
+ "failedInstall": "A instalação falhou. Por favor, tente novamente."
},
"dialog": {
- "dontAskAgain": "Don't ask again"
+ "dontAskAgain": "Não perguntar novamente"
},
"userFields": {
- "cancel": "Cancel",
+ "cancel": "Cancelar",
"upload": "Carregar"
},
"serial": {
- "toggleTimestamp": "Toggle Timestamp",
+ "toggleTimestamp": "Mudar Data e Hora",
"autoscroll": "Avanço automático de linha",
- "timestamp": "Timestamp",
+ "timestamp": "Data e Hora",
"noLineEndings": "Sem final de linha",
"newLine": "Nova linha",
"carriageReturn": "Retorno de linha",
"newLineCarriageReturn": "Nova linha e retorno de linha",
- "notConnected": "Not connected. Select a board and a port to connect automatically.",
- "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
- "connectionBusy": "Connection failed. Serial port is busy: {0}",
- "disconnected": "Disconnected {0} from {1}.",
- "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
- "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
- "reconnect": "Reconnecting {0} to {1} in {2} seconds..."
+ "notConnected": "Não conectado. Selecione uma placa e uma porta para conectar automaticamente.",
+ "message": "Mensagem ({0} + Enter para enviar mensagem para '{1}' em '{2}'",
+ "connectionBusy": "A conexão falhou. A porta serial está ocupada: {0}",
+ "disconnected": "Desconectado {0} de {1}.",
+ "unexpectedError": "Erro inesperado. Reconectando {0} na porta {1}.",
+ "failedReconnect": "Falha ao reconectar com a porta serial {0} após 10 tentativas consecutivas. A porta serial {1} está ocupada.",
+ "reconnect": "Reconectando {0} ao {1} em {2} segundos..."
},
"component": {
- "uninstall": "Uninstall",
- "uninstallMsg": "Do you want to uninstall {0}?",
- "by": "by",
+ "uninstall": "Desinstalar",
+ "uninstallMsg": "Deseja desinstalar {0}?",
+ "by": "por",
"version": "Versão {0}",
- "moreInfo": "More info",
+ "moreInfo": "Mais informações",
"install": "Instalar",
"filterSearch": "Filtrar a sua pesquisa…"
},
"electron": {
- "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
- "unsavedChanges": "Any unsaved changes will not be saved."
+ "couldNotSave": "Não foi possível salvar o sketch. Copie seu trabalho não salvo em seu editor de texto favorito e reinicie a IDE.",
+ "unsavedChanges": "Quaisquer alterações não serão salvas."
},
"compile": {
- "error": "Compilation error: {0}"
+ "error": "Erro de compilação: {0}"
},
"upload": {
- "error": "{0} error: {1}"
+ "error": "{0} erro: {1}"
},
"burnBootloader": {
- "error": "Error while burning the bootloader: {0}"
+ "error": "Erro ao gravar o bootloader: {0}"
}
},
"theia": {
"core": {
- "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "couldNotSave": "Não foi possível salvar o sketch. Copie seu trabalho não salvo em seu editor de texto favorito e reinicie a IDE.",
"offline": "Offline",
"daemonOffline": "CLI Daemon Offline",
- "cannotConnectBackend": "Cannot connect to the backend.",
- "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ "cannotConnectBackend": "Não é possível conectar-se ao backend.",
+ "cannotConnectDaemon": "Não é possível conectar-se ao CLI daemon."
},
"debug": {
- "start": "Start...",
- "typeNotSupported": "The debug session type \"{0}\" is not supported.",
- "startError": "There was an error starting the debug session, check the logs for more details."
+ "start": "Iniciar...",
+ "typeNotSupported": "O tipo de sessão de depuração \"{0}\" não é suportado.",
+ "startError": "Ocorreu um erro ao iniciar a sessão de depuração, verifique os logs para obter mais detalhes."
},
"editor": {
- "unsavedTitle": "Unsaved – {0}"
+ "unsavedTitle": "Sem Nome – {0}"
},
"messages": {
- "expand": "Expand",
- "collapse": "Collapse"
+ "expand": "Expandir",
+ "collapse": "Recolher"
},
"workspace": {
- "fileNewName": "Name for new file",
- "invalidFilename": "Invalid filename.",
+ "fileNewName": "Nome para o novo arquivo",
+ "invalidFilename": "Arquivo inválido.",
"invalidExtension": "\".{0}\" não é uma extensão válida.",
- "newFileName": "New name for file",
- "deleteCurrentSketch": "Do you want to delete the current sketch?",
- "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
+ "newFileName": "Novo nome para o arquivo",
+ "deleteCurrentSketch": "Você deseja excluir o sketch atual?",
+ "sketchDirectoryError": "Ocorreu um erro ao criar o diretório de sketch. Veja o log para mais detalhes. O aplicativo provavelmente não funcionará conforme o esperado."
}
},
"cloud": {
- "GoToCloud": "GO TO CLOUD"
+ "GoToCloud": "IR PARA A NUVEM"
}
}
diff --git a/i18n/ro.json b/i18n/ro.json
new file mode 100644
index 000000000..25a099ff0
--- /dev/null
+++ b/i18n/ro.json
@@ -0,0 +1,334 @@
+{
+ "arduino": {
+ "common": {
+ "offlineIndicator": "Se pare că nu ești conectat la internet. Fără o conexiune la internet, Arduino CLI nu poate descarca resursele necesare și poate cauza funcționare anormală. Conectează-te la internet și repornește aplicația.",
+ "noBoardSelected": "Placa de dezvoltare nu a fost aleasă.",
+ "selectedOn": "pe {0}",
+ "notConnected": "[neconectat]",
+ "serialMonitor": "Monitor Serial",
+ "oldFormat": "'{0}' utilizează formatul vechi `.pde`. Vrei să treci la noua extensie `ino`?",
+ "later": "Mai târziu",
+ "selectBoard": "Alege placa de dezvoltare",
+ "unknown": "Necunoscut",
+ "processing": "Procesare",
+ "saveChangesToSketch": "Vrei să salvezi modificările făcute schiței înainte de a închide?",
+ "loseChanges": "Dacă nu salvezi, modificările se vor pierde."
+ },
+ "menu": {
+ "sketch": "Schița",
+ "tools": "Unelte"
+ },
+ "debug": {
+ "optimizeForDebugging": "Optimizare pentru depanare",
+ "debugWithMessage": "Depanare - {0}",
+ "noPlatformInstalledFor": "Platforma nu este instalată pentru '{0}'",
+ "debuggingNotSupported": "Depanarea nu este suportată de '{0}'"
+ },
+ "preferences": {
+ "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
+ "compile.verbose": "True for verbose compile output. False by default",
+ "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
+ "upload.verbose": "True for verbose upload output. False by default.",
+ "window.autoScale": "True if the user interface automatically scales with the font size.",
+ "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.",
+ "ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
+ "board.certificates": "List of certificates that can be uploaded to boards",
+ "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
+ "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
+ "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
+ "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
+ "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
+ "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
+ "auth.clientID": "The OAuth2 client ID.",
+ "auth.domain": "The OAuth2 domain.",
+ "auth.audience": "The OAuth2 audience.",
+ "auth.registerUri": "The URI used to register a new user.",
+ "network": "Network",
+ "sketchbook.location": "Sketchbook location",
+ "browse": "Browse",
+ "files.inside.sketches": "Show files inside Sketches",
+ "editorFontSize": "Editor font size",
+ "interfaceScale": "Interface scale",
+ "showVerbose": "Show verbose output during",
+ "compilerWarnings": "Compiler warnings",
+ "automatic": "Automatic",
+ "compile": "compile",
+ "upload": "upload",
+ "verifyAfterUpload": "Verify code after upload",
+ "checkForUpdates": "Check for updates on startup",
+ "editorQuickSuggestions": "Editor Quick Suggestions",
+ "additionalManagerURLs": "Additional Boards Manager URLs",
+ "noProxy": "No proxy",
+ "manualProxy": "Manual proxy configuration",
+ "newSketchbookLocation": "Select new sketchbook location",
+ "choose": "Choose",
+ "enterAdditionalURLs": "Enter additional URLs, one for each row",
+ "unofficialBoardSupport": "Click for a list of unofficial board support URLs",
+ "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
+ "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
+ "invalid.theme": "Invalid theme."
+ },
+ "cloud": {
+ "signIn": "SIGN IN",
+ "signOut": "Sign Out",
+ "chooseSketchVisibility": "Choose visibility of your Sketch:",
+ "privateVisibility": "Private. Only you can view the Sketch.",
+ "publicVisibility": "Public. Anyone with the link can view the Sketch.",
+ "link": "Link:",
+ "embed": "Embed:",
+ "cloudSketchbook": "Cloud Sketchbook",
+ "shareSketch": "Share Sketch",
+ "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
+ "pullSketch": "Pull Sketch",
+ "openInCloudEditor": "Open in Cloud Editor",
+ "options": "Options...",
+ "share": "Share...",
+ "remote": "Remote",
+ "emptySketchbook": "Your Sketchbook is empty",
+ "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
+ "signInToCloud": "Sign in to Arduino Cloud",
+ "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
+ "learnMore": "Learn more",
+ "continue": "Continue",
+ "pushSketch": "Push Sketch",
+ "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
+ "pull": "Pull",
+ "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
+ "donePulling": "Done pulling ‘{0}’.",
+ "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
+ "push": "Push",
+ "pullFirst": "You have to pull first to be able to push to the Cloud.",
+ "donePushing": "Done pushing ‘{0}’.",
+ "connected": "Connected",
+ "offline": "Offline",
+ "profilePicture": "Profile picture"
+ },
+ "board": {
+ "installManually": "Install Manually",
+ "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
+ "configDialogTitle": "Select Other Board & Port",
+ "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
+ "configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
+ "pleasePickBoard": "Please pick a board connected to the port you have selected.",
+ "showAllAvailablePorts": "Shows all available ports when enabled",
+ "programmer": "Programmer",
+ "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
+ "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}",
+ "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
+ "reselectLater": "Reselect later",
+ "noneSelected": "No boards selected.",
+ "noPortsSelected": "No ports selected for board: '{0}'.",
+ "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
+ "openBoardsConfig": "Select other board and port…",
+ "boardListItem": "{0} at {1}",
+ "selectBoardForInfo": "Please select a board to obtain board info.",
+ "platformMissing": "The platform for the selected '{0}' board is not installed.",
+ "selectPortForInfo": "Please select a port to obtain board info.",
+ "boardInfo": "Board Info",
+ "board": "Board{0}",
+ "port": "Port{0}",
+ "getBoardInfo": "Get Board Info",
+ "inSketchbook": " (in Sketchbook)"
+ },
+ "boardsManager": "Boards Manager",
+ "about": {
+ "label": "About {0}",
+ "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
+ },
+ "contributions": {
+ "addFile": "Add File",
+ "replaceTitle": "Replace",
+ "fileAdded": "One file added to the sketch."
+ },
+ "replaceMsg": "Replace the existing version of {0}?",
+ "library": {
+ "addZip": "Add .ZIP Library...",
+ "zipLibrary": "Library",
+ "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
+ "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
+ "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
+ "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
+ "include": "Include Library",
+ "manageLibraries": "Manage Libraries...",
+ "arduinoLibraries": "Arduino libraries",
+ "contributedLibraries": "Contributed libraries",
+ "title": "Library Manager",
+ "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
+ "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
+ "installOneMissingDependency": "Would you like to install the missing dependency?",
+ "installMissingDependencies": "Would you like to install all the missing dependencies?",
+ "dependenciesForLibrary": "Dependencies for library {0}:{1}",
+ "installAll": "Install all",
+ "installOnly": "Install {0} only",
+ "installedSuccessfully": "Successfully installed library {0}:{1}",
+ "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}"
+ },
+ "selectZip": "Select a zip file containing the library you'd like to add",
+ "sketch": {
+ "archiveSketch": "Archive Sketch",
+ "saveSketchAs": "Save sketch folder as...",
+ "createdArchive": "Created archive '{0}'.",
+ "new": "New",
+ "openRecent": "Open Recent",
+ "showFolder": "Show Sketch Folder",
+ "sketch": "Sketch",
+ "moving": "Moving",
+ "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
+ "cantOpen": "A folder named \"{0}\" already exists. Can't open sketch.",
+ "saveFolderAs": "Save sketch folder as...",
+ "sketchbook": "Sketchbook",
+ "upload": "Upload",
+ "uploadUsingProgrammer": "Upload Using Programmer",
+ "userFieldsNotFoundError": "Can't find user fields for connected board",
+ "doneUploading": "Done uploading.",
+ "configureAndUpload": "Configure And Upload",
+ "verifyOrCompile": "Verify/Compile",
+ "exportBinary": "Export Compiled Binary",
+ "verify": "Verify",
+ "doneCompiling": "Done compiling.",
+ "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
+ "openSketchInNewWindow": "Open Sketch in New Window",
+ "openFolder": "Open Folder",
+ "titleLocalSketchbook": "Local Sketchbook",
+ "titleSketchbook": "Sketchbook",
+ "close": "Are you sure you want to close the sketch?"
+ },
+ "bootloader": {
+ "burnBootloader": "Burn Bootloader",
+ "doneBurningBootloader": "Done burning bootloader."
+ },
+ "editor": {
+ "copyForForum": "Copy for Forum (Markdown)",
+ "commentUncomment": "Comment/Uncomment",
+ "increaseIndent": "Increase Indent",
+ "decreaseIndent": "Decrease Indent",
+ "increaseFontSize": "Increase Font Size",
+ "decreaseFontSize": "Decrease Font Size",
+ "autoFormat": "Auto Format"
+ },
+ "examples": {
+ "menu": "Examples",
+ "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "builtInExamples": "Built-in examples",
+ "customLibrary": "Examples from Custom Libraries",
+ "for": "Examples for {0}",
+ "forAny": "Examples for any board"
+ },
+ "help": {
+ "search": "Search on Arduino.cc",
+ "keyword": "Type a keyword",
+ "gettingStarted": "Getting Started",
+ "environment": "Environment",
+ "troubleshooting": "Troubleshooting",
+ "reference": "Reference",
+ "findInReference": "Find in Reference",
+ "faq": "Frequently Asked Questions",
+ "visit": "Visit Arduino.cc"
+ },
+ "certificate": {
+ "uploadRootCertificates": "Upload SSL Root Certificates",
+ "openContext": "Open context",
+ "remove": "Remove",
+ "upload": "Upload",
+ "addURL": "Add URL to fetch SSL certificate",
+ "enterURL": "Enter URL",
+ "selectCertificateToUpload": "1. Select certificate to upload",
+ "addNew": "Add New",
+ "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
+ "uploadingCertificates": "Uploading certificates.",
+ "certificatesUploaded": "Certificates uploaded.",
+ "uploadFailed": "Upload failed. Please try again.",
+ "selectBoard": "Select a board...",
+ "boardAtPort": "{0} la {1}",
+ "noSupportedBoardConnected": "No supported board connected"
+ },
+ "firmware": {
+ "updater": "WiFi101 / WiFiNINA Firmware Updater",
+ "selectBoard": "Selectează Placa",
+ "checkUpdates": "Verifică Versiunile",
+ "selectVersion": "Select firmware version",
+ "install": "Instalează",
+ "overwriteSketch": "Installation will overwrite the Sketch on the board.",
+ "installingFirmware": "Installing firmware.",
+ "successfullyInstalled": "Firmware succesfully installed.",
+ "failedInstall": "Instalarea a eșuat. Te rugăm să încerci din nou."
+ },
+ "dialog": {
+ "dontAskAgain": "Nu mai întreba"
+ },
+ "userFields": {
+ "cancel": "Anulează",
+ "upload": "Încarcă"
+ },
+ "serial": {
+ "toggleTimestamp": "Toggle Timestamp",
+ "autoscroll": "Autoderulare",
+ "timestamp": "Timestamp",
+ "noLineEndings": "No Line Ending",
+ "newLine": "Linie Nouă",
+ "carriageReturn": "Carriage Return",
+ "newLineCarriageReturn": "Both NL & CR",
+ "notConnected": "Not connected. Select a board and a port to connect automatically.",
+ "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
+ "connectionBusy": "Conexiunea a eșuat. Portul Serial este ocupat: {0}",
+ "disconnected": "Deconectat {0} de la {1}.",
+ "unexpectedError": "Eroare neașteptată. Reconectare {0} pe portul {1}.",
+ "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
+ "reconnect": "Reconectare {0} către {1} în {2} secunde..."
+ },
+ "component": {
+ "uninstall": "Dezinstalează",
+ "uninstallMsg": "Dorești să dezinstalezi {0}?",
+ "by": "de",
+ "version": "Versiunea {0}",
+ "moreInfo": "Mai multe informații",
+ "install": "INSTALEAZĂ",
+ "filterSearch": "Filtrează căutarea..."
+ },
+ "electron": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "unsavedChanges": "Any unsaved changes will not be saved."
+ },
+ "compile": {
+ "error": "Compilation error: {0}"
+ },
+ "upload": {
+ "error": "{0} eroare :{1}"
+ },
+ "burnBootloader": {
+ "error": "Error while burning the bootloader: {0}"
+ }
+ },
+ "theia": {
+ "core": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "offline": "Offline",
+ "daemonOffline": "CLI Daemon Offline",
+ "cannotConnectBackend": "Cannot connect to the backend.",
+ "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ },
+ "debug": {
+ "start": "Start...",
+ "typeNotSupported": "The debug session type \"{0}\" is not supported.",
+ "startError": "There was an error starting the debug session, check the logs for more details."
+ },
+ "editor": {
+ "unsavedTitle": "Nesalvat – {0}"
+ },
+ "messages": {
+ "expand": "Extinde",
+ "collapse": "Collapse"
+ },
+ "workspace": {
+ "fileNewName": "Nume pentru noul fișier",
+ "invalidFilename": "Numele fișierului este invalid.",
+ "invalidExtension": ".{0} nu este o extensie validă",
+ "newFileName": "Nume pentru noul fișier",
+ "deleteCurrentSketch": "Dorești sa ștergi schița curentă?",
+ "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
+ }
+ },
+ "cloud": {
+ "GoToCloud": "GO TO CLOUD"
+ }
+}
diff --git a/i18n/ru.json b/i18n/ru.json
index 78b6edfd0..40639d26a 100644
--- a/i18n/ru.json
+++ b/i18n/ru.json
@@ -1,95 +1,95 @@
{
"arduino": {
"common": {
- "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.",
- "noBoardSelected": "No board selected",
+ "offlineIndicator": "Похоже, у Вас нет подключения к Интернету. Без подключения к Интернету Arduino CLI не сможет загрузить необходимые ресурсы и упадет. Подключитесь к Интернету и перезапустите приложение.",
+ "noBoardSelected": "Плата не выбрана",
"selectedOn": "on {0}",
- "notConnected": "[not connected]",
+ "notConnected": "[не подключено].",
"serialMonitor": "Монитор порта",
- "oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?",
- "later": "Later",
- "selectBoard": "Select Board",
- "unknown": "Unknown",
+ "oldFormat": "'{0}' использует старый формат `.pde`. Хотите сконвертировать в новый формат `.ino`?",
+ "later": "Позже",
+ "selectBoard": "Выбрать плату",
+ "unknown": "Неизвестно",
"processing": "Processing",
- "saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
- "loseChanges": "If you don't save, your changes will be lost."
+ "saveChangesToSketch": "Сохранить изменения в этом скетче перед закрытием?",
+ "loseChanges": "Если не сохранить изменения - они будут потеряны."
},
"menu": {
"sketch": "Скетч",
"tools": "Инструменты"
},
"debug": {
- "optimizeForDebugging": "Optimize for Debugging",
- "debugWithMessage": "Debug - {0}",
- "noPlatformInstalledFor": "Platform is not installed for '{0}'",
- "debuggingNotSupported": "Debugging is not supported by '{0}'"
+ "optimizeForDebugging": "Оптимизировать для отладки",
+ "debugWithMessage": "Отладка - {0}",
+ "noPlatformInstalledFor": "Платформа не установлена для '{0}'",
+ "debuggingNotSupported": "Отладка не поддерживается '{0}'"
},
"preferences": {
- "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
- "compile.verbose": "True for verbose compile output. False by default",
+ "language.log": "True - сервер Arduino Language будет создавать файлы журнала в папке скетча. В противном случае - false. По умолчанию - false.",
+ "compile.verbose": "True для подробного вывода компилятора. По умолчанию - false.",
"compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
- "upload.verbose": "True for verbose upload output. False by default.",
- "window.autoScale": "True if the user interface automatically scales with the font size.",
+ "upload.verbose": "True - подробный вывод при загрузке скетча на плату. По умолчанию - false.",
+ "window.autoScale": "True, если пользовательский интерфейс автоматически масштабируется в зависимости от размера шрифта.",
"window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.",
- "ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
- "board.certificates": "List of certificates that can be uploaded to boards",
- "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
- "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
+ "ide.autoUpdate": "True - автоматическая проверка обновлений включена. IDE будет проверять наличие обновлений периодически в автоматическом режиме.",
+ "board.certificates": "Список сертификатов, которые могут быть загружены в платы",
+ "sketchbook.showAllFiles": "True - показывать все файлы внутри скетча. По умолчанию - false.",
+ "cloud.enabled": "True, если функции синхронизации скетчей включены. По умолчанию - true.",
"cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
"cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
"cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
"cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
- "auth.clientID": "The OAuth2 client ID.",
- "auth.domain": "The OAuth2 domain.",
+ "auth.clientID": "Идентификатор клиента OAuth2.",
+ "auth.domain": "Домен OAuth2.",
"auth.audience": "The OAuth2 audience.",
- "auth.registerUri": "The URI used to register a new user.",
+ "auth.registerUri": "URI, используемый для регистрации нового пользователя.",
"network": "Сеть",
- "sketchbook.location": "Sketchbook location",
+ "sketchbook.location": "Путь к альбому со скетчами",
"browse": "Обзор",
- "files.inside.sketches": "Show files inside Sketches",
- "editorFontSize": "Editor font size",
- "interfaceScale": "Interface scale",
- "showVerbose": "Show verbose output during",
- "compilerWarnings": "Compiler warnings",
+ "files.inside.sketches": "Показывать файлы в скетчах",
+ "editorFontSize": "Размер шрифта в редакторе",
+ "interfaceScale": "Масштабирование интерфейса",
+ "showVerbose": "Показывать детализированный вывод при",
+ "compilerWarnings": "Предупреждения компилятора",
"automatic": "Автоматика",
- "compile": "compile",
- "upload": "upload",
- "verifyAfterUpload": "Verify code after upload",
+ "compile": "компиляции",
+ "upload": "выгрузке на плату",
+ "verifyAfterUpload": "Проверять содержимое памяти платы после загрузки",
"checkForUpdates": "Проверять обновления при запуске",
- "editorQuickSuggestions": "Editor Quick Suggestions",
+ "editorQuickSuggestions": "Быстрые подсказки в редакторе",
"additionalManagerURLs": "Дополнительные ссылки для Менеджера плат",
- "noProxy": "No proxy",
- "manualProxy": "Manual proxy configuration",
- "newSketchbookLocation": "Select new sketchbook location",
+ "noProxy": "Не использовать прокси-сервер",
+ "manualProxy": "Ручная настройка параметров прокси-сервера",
+ "newSketchbookLocation": "Выбрать новое расположение для альбома со скетчами",
"choose": "Choose",
- "enterAdditionalURLs": "Enter additional URLs, one for each row",
+ "enterAdditionalURLs": "Введите дополнительные URL, по одному в каждой строке",
"unofficialBoardSupport": "Click for a list of unofficial board support URLs",
- "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
+ "invalid.sketchbook.location": "Неправильный путь к альбому со скетчами: {0}",
"invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
- "invalid.theme": "Invalid theme."
+ "invalid.theme": "Неверная тема."
},
"cloud": {
- "signIn": "SIGN IN",
- "signOut": "Sign Out",
- "chooseSketchVisibility": "Choose visibility of your Sketch:",
- "privateVisibility": "Private. Only you can view the Sketch.",
- "publicVisibility": "Public. Anyone with the link can view the Sketch.",
- "link": "Link:",
+ "signIn": "Войти",
+ "signOut": "Выйти",
+ "chooseSketchVisibility": "Выберите видимость своего скетча:",
+ "privateVisibility": "Приватный. Только автор можешь просматривать скетч.",
+ "publicVisibility": "Публичный. Любой, у кого есть ссылка, может посмотреть скетч.",
+ "link": "Ссылка:",
"embed": "Embed:",
- "cloudSketchbook": "Cloud Sketchbook",
- "shareSketch": "Share Sketch",
- "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
+ "cloudSketchbook": "Альбом в облаке",
+ "shareSketch": "Поделиться скетчем",
+ "showHideRemoveSketchbook": "Показать/скрыть удаленный альбом",
"pullSketch": "Pull Sketch",
- "openInCloudEditor": "Open in Cloud Editor",
- "options": "Options...",
- "share": "Share...",
+ "openInCloudEditor": "Открыть в облачном редакторе",
+ "options": "Параметры...",
+ "share": "Поделиться...",
"remote": "Remote",
- "emptySketchbook": "Your Sketchbook is empty",
- "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
- "signInToCloud": "Sign in to Arduino Cloud",
- "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
- "learnMore": "Learn more",
- "continue": "Continue",
+ "emptySketchbook": "Ваш альбом пуст",
+ "visitArduinoCloud": "Посетите Arduino Cloud, чтобы создать скетчи в облаке.",
+ "signInToCloud": "Войдите в Arduino Cloud",
+ "syncEditSketches": "Синхронизировать и редактировать скетчи в Arduino Cloud",
+ "learnMore": "Узнать больше",
+ "continue": "Продолжить",
"pushSketch": "Push Sketch",
"pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
"pull": "Pull",
@@ -101,163 +101,163 @@
"donePushing": "Done pushing ‘{0}’.",
"connected": "Connected",
"offline": "Offline",
- "profilePicture": "Profile picture"
+ "profilePicture": "Фотография профиля"
},
"board": {
- "installManually": "Install Manually",
+ "installManually": "Установить вручную",
"installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
- "configDialogTitle": "Select Other Board & Port",
- "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
+ "configDialogTitle": "Выберите другую плату и порт",
+ "configDialog1": "Выберите плату и порт, если Вы хотите загрузить скетч в плату.",
"configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
"pleasePickBoard": "Please pick a board connected to the port you have selected.",
"showAllAvailablePorts": "Shows all available ports when enabled",
- "programmer": "Programmer",
- "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
- "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}",
+ "programmer": "Программатор",
+ "succesfullyInstalledPlatform": "Платформа установлена успешно {0}:{1}",
+ "succesfullyUninstalledPlatform": "Платформа успешно удалена {0}:{1}",
"couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
- "reselectLater": "Reselect later",
- "noneSelected": "No boards selected.",
- "noPortsSelected": "No ports selected for board: '{0}'.",
- "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
- "openBoardsConfig": "Select other board and port…",
+ "reselectLater": "Выборать позже",
+ "noneSelected": "Плата не выбрана.",
+ "noPortsSelected": "Не выбраны порты для платы: '{0}'.",
+ "noFQBN": "FQBN недоступен для выбранной платы \"{0}\". Проверьте наличие необходимого ядра.",
+ "openBoardsConfig": "Выберите другую плату и порт...",
"boardListItem": "{0} at {1}",
- "selectBoardForInfo": "Please select a board to obtain board info.",
- "platformMissing": "The platform for the selected '{0}' board is not installed.",
- "selectPortForInfo": "Please select a port to obtain board info.",
+ "selectBoardForInfo": "Пожалуйста, выберите плату в меню инструментов для получения информации с платы.",
+ "platformMissing": "Платформа для выбранной платы '{0}' не установлена.",
+ "selectPortForInfo": "Пожалуйста, выберите порт в меню инструментов для получения информации с платы.",
"boardInfo": "Информация о плате",
- "board": "Board{0}",
- "port": "Port{0}",
- "getBoardInfo": "Get Board Info",
- "inSketchbook": " (in Sketchbook)"
+ "board": "Плата{0}",
+ "port": "Порт{0}",
+ "getBoardInfo": "Получить информацию о подключенной плате",
+ "inSketchbook": " (в альбоме)."
},
"boardsManager": "Менеджер плат",
"about": {
- "label": "About {0}",
- "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
+ "label": "О программе {0}",
+ "detail": "Версия: {0}\nДата: {1}{2}\nВерсия CLI: {3}{4} [{5}]\n\n{6}"
},
"contributions": {
"addFile": "Добавить файл...",
- "replaceTitle": "Replace",
- "fileAdded": "One file added to the sketch."
+ "replaceTitle": "Заменить",
+ "fileAdded": "Один файл добавлен в скетч."
},
- "replaceMsg": "Replace the existing version of {0}?",
+ "replaceMsg": "Заменить имеющуюся версию {0}?",
"library": {
"addZip": "Добавить .ZIP библиотеку...",
- "zipLibrary": "Library",
- "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
- "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
- "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
- "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
- "include": "Include Library",
- "manageLibraries": "Manage Libraries...",
- "arduinoLibraries": "Arduino libraries",
- "contributedLibraries": "Contributed libraries",
- "title": "Library Manager",
+ "zipLibrary": "Библиотека",
+ "overwriteExistingLibrary": "Вы хотите заменить уже имеющуюся библиотеку?",
+ "successfullyInstalledZipLibrary": "Бибилиотека из архива {0} успешно установлена",
+ "namedLibraryAlreadyExists": "Папка библиотеки {0} уже существует. Вы хотите ее заменить?",
+ "libraryAlreadyExists": "Библиотека уже существует. Вы хотите ее заменить?",
+ "include": "Подключить библиотеку",
+ "manageLibraries": "Управление библиотеками...",
+ "arduinoLibraries": "Библиотеки Arduino",
+ "contributedLibraries": "Сторонние библиотеки",
+ "title": "Управление библиотеками",
"needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
"needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
- "installOneMissingDependency": "Would you like to install the missing dependency?",
- "installMissingDependencies": "Would you like to install all the missing dependencies?",
- "dependenciesForLibrary": "Dependencies for library {0}:{1}",
- "installAll": "Install all",
- "installOnly": "Install {0} only",
- "installedSuccessfully": "Successfully installed library {0}:{1}",
- "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}"
+ "installOneMissingDependency": "Установить недостающую зависимость?",
+ "installMissingDependencies": "Установить все недостающие зависимости?",
+ "dependenciesForLibrary": "Зависимости для библиотеки {0}:{1}",
+ "installAll": "Установить все",
+ "installOnly": "Установить только {0}",
+ "installedSuccessfully": "Успешно установлена библиотека {0}:{1}",
+ "uninstalledSuccessfully": "Успешно удалена библиотека {0}:{1}"
},
- "selectZip": "Select a zip file containing the library you'd like to add",
+ "selectZip": "Выберите zip-файл, содержащий библиотеку, которую вы хотите установить",
"sketch": {
"archiveSketch": "Архивировать скетч",
- "saveSketchAs": "Save sketch folder as...",
- "createdArchive": "Created archive '{0}'.",
- "new": "New",
- "openRecent": "Open Recent",
- "showFolder": "Show Sketch Folder",
- "sketch": "Sketch",
+ "saveSketchAs": "Сохранить папку скетча как...",
+ "createdArchive": "Создать архив '{0}'.",
+ "new": "Новый скетч",
+ "openRecent": "Открыть предыдущий",
+ "showFolder": "Показать папку скетча",
+ "sketch": "Скетч",
"moving": "Moving",
"movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
"cantOpen": "Папка \"{0}\" уже существует. Невозможно открыть скетч.",
- "saveFolderAs": "Save sketch folder as...",
- "sketchbook": "Sketchbook",
- "upload": "Upload",
- "uploadUsingProgrammer": "Upload Using Programmer",
+ "saveFolderAs": "Сохранить папку со скетчем как...",
+ "sketchbook": "Альбом",
+ "upload": "Загрузить на плату",
+ "uploadUsingProgrammer": "Загрузить на плату при помощи программатора",
"userFieldsNotFoundError": "Can't find user fields for connected board",
- "doneUploading": "Done uploading.",
- "configureAndUpload": "Configure And Upload",
- "verifyOrCompile": "Verify/Compile",
- "exportBinary": "Export Compiled Binary",
- "verify": "Verify",
- "doneCompiling": "Done compiling.",
- "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
- "openSketchInNewWindow": "Open Sketch in New Window",
- "openFolder": "Open Folder",
- "titleLocalSketchbook": "Local Sketchbook",
- "titleSketchbook": "Sketchbook",
- "close": "Are you sure you want to close the sketch?"
+ "doneUploading": "Загрузка завершена.",
+ "configureAndUpload": "Настроить и загрузить",
+ "verifyOrCompile": "Проверить/Скомпилировать",
+ "exportBinary": "Экспортировать скомпилированный бинарный файл",
+ "verify": "Проверить",
+ "doneCompiling": "Компиляция завершена.",
+ "couldNotConnectToSerial": "Не удалось переподключиться к последовательному порту. {0}",
+ "openSketchInNewWindow": "Открыть скетч в новом окне",
+ "openFolder": "Открыть папку",
+ "titleLocalSketchbook": "Локальный альбом",
+ "titleSketchbook": "Альбом",
+ "close": "Вы действительно хотите закрыть скетч?"
},
"bootloader": {
"burnBootloader": "Записать Загрузчик",
- "doneBurningBootloader": "Done burning bootloader."
+ "doneBurningBootloader": "Прошивка бутлоадера завершена."
},
"editor": {
"copyForForum": "Копировать для форума (Markdown)",
- "commentUncomment": "Добавить/Удалить комментарий",
- "increaseIndent": "Increase Indent",
- "decreaseIndent": "Decrease Indent",
- "increaseFontSize": "Increase Font Size",
+ "commentUncomment": "Закомментировать/Раскомментировать",
+ "increaseIndent": "Увеличить отступ",
+ "decreaseIndent": "Уменьшить отступ",
+ "increaseFontSize": "Увеличить размер шрифта",
"decreaseFontSize": "Уменьшить размер шрифта",
"autoFormat": "АвтоФорматирование"
},
"examples": {
- "menu": "Examples",
- "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "menu": "Примеры",
+ "couldNotInitializeExamples": "Невозможно инициализировать встроенные примеры.",
"builtInExamples": "Встроенные Примеры",
- "customLibrary": "Examples from Custom Libraries",
- "for": "Examples for {0}",
- "forAny": "Examples for any board"
+ "customLibrary": "Примеры из пользовательских библиотек",
+ "for": "Примеры для {0}",
+ "forAny": "Примеры для любой платы"
},
"help": {
- "search": "Search on Arduino.cc",
- "keyword": "Type a keyword",
- "gettingStarted": "Getting Started",
- "environment": "Environment",
- "troubleshooting": "Troubleshooting",
- "reference": "Reference",
- "findInReference": "Find in Reference",
- "faq": "Frequently Asked Questions",
- "visit": "Visit Arduino.cc"
+ "search": "Найти на Arduino.cc",
+ "keyword": "Введите ключевое слово",
+ "gettingStarted": "Приступая к работе",
+ "environment": "Окружение",
+ "troubleshooting": "Устранение неполадок",
+ "reference": "Справочник по функциям",
+ "findInReference": "Найти в справочнике",
+ "faq": "Часто задаваемые вопросы",
+ "visit": "Перейти на сайт Arduino.cc"
},
"certificate": {
- "uploadRootCertificates": "Upload SSL Root Certificates",
- "openContext": "Open context",
+ "uploadRootCertificates": "Загрузка корневого сертификата SSL",
+ "openContext": "Открыть контекст",
"remove": "Remove",
"upload": "Загрузка",
- "addURL": "Add URL to fetch SSL certificate",
- "enterURL": "Enter URL",
- "selectCertificateToUpload": "1. Select certificate to upload",
+ "addURL": "Добавление URL для получения SSL-сертификата",
+ "enterURL": "Введите URL",
+ "selectCertificateToUpload": "1. Выберите сертификат для загрузки",
"addNew": "Add New",
"selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
"uploadingCertificates": "Uploading certificates.",
- "certificatesUploaded": "Certificates uploaded.",
- "uploadFailed": "Upload failed. Please try again.",
- "selectBoard": "Select a board...",
+ "certificatesUploaded": "Сертификаты зугружены.",
+ "uploadFailed": "Загрузка не удалась. Повторите попытку.",
+ "selectBoard": "Выберите плату...",
"boardAtPort": "{0} at {1}",
- "noSupportedBoardConnected": "No supported board connected"
+ "noSupportedBoardConnected": "Не подключено ни одной поддерживаемой платы"
},
"firmware": {
- "updater": "WiFi101 / WiFiNINA Firmware Updater",
- "selectBoard": "Select Board",
- "checkUpdates": "Check Updates",
+ "updater": "Обновление прошивки WiFi101 / WiFiNINA",
+ "selectBoard": "Выбор платы",
+ "checkUpdates": "Проверить наличие обновлений",
"selectVersion": "Select firmware version",
"install": "Установка",
"overwriteSketch": "Installation will overwrite the Sketch on the board.",
- "installingFirmware": "Installing firmware.",
- "successfullyInstalled": "Firmware succesfully installed.",
- "failedInstall": "Installation failed. Please try again."
+ "installingFirmware": "Установка прошивки.",
+ "successfullyInstalled": "Прошивка успешно установлена.",
+ "failedInstall": "Не удалось установить прошивку. Повторите попытку."
},
"dialog": {
- "dontAskAgain": "Don't ask again"
+ "dontAskAgain": "Больше не спрашивать"
},
"userFields": {
- "cancel": "Cancel",
+ "cancel": "Отмена",
"upload": "Загрузка"
},
"serial": {
@@ -270,18 +270,18 @@
"newLineCarriageReturn": "NL & CR",
"notConnected": "Not connected. Select a board and a port to connect automatically.",
"message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
- "connectionBusy": "Connection failed. Serial port is busy: {0}",
+ "connectionBusy": "Не удалось подключиться. Последовательный порт занят: {0}",
"disconnected": "Disconnected {0} from {1}.",
"unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
- "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
+ "failedReconnect": "Не удалось переподключиться {0} к последовательному порту после 10 попыток. Последовательный порт {1} занят.",
"reconnect": "Reconnecting {0} to {1} in {2} seconds..."
},
"component": {
- "uninstall": "Uninstall",
+ "uninstall": "Удалить",
"uninstallMsg": "Do you want to uninstall {0}?",
"by": "by",
"version": "Версия {0}",
- "moreInfo": "More info",
+ "moreInfo": "Дополнительная информация",
"install": "Установка",
"filterSearch": "Отфильтровать результаты поиска..."
},
@@ -290,13 +290,13 @@
"unsavedChanges": "Any unsaved changes will not be saved."
},
"compile": {
- "error": "Compilation error: {0}"
+ "error": "Ошибка компиляции: {0}"
},
"upload": {
"error": "{0} error: {1}"
},
"burnBootloader": {
- "error": "Error while burning the bootloader: {0}"
+ "error": "Ошибка при прошивке бутлоадера: {0}"
}
},
"theia": {
@@ -304,27 +304,27 @@
"couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
"offline": "Offline",
"daemonOffline": "CLI Daemon Offline",
- "cannotConnectBackend": "Cannot connect to the backend.",
- "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ "cannotConnectBackend": "Невозможно подключиться к бэкенду.",
+ "cannotConnectDaemon": "Невозможно подключиться к фоновому процессу CLI."
},
"debug": {
- "start": "Start...",
+ "start": "Запуск...",
"typeNotSupported": "The debug session type \"{0}\" is not supported.",
- "startError": "There was an error starting the debug session, check the logs for more details."
+ "startError": "Произошла ошибка при запуске отладочной сессии, просмотрите журнал для получения дополнительной информации."
},
"editor": {
"unsavedTitle": "Unsaved – {0}"
},
"messages": {
- "expand": "Expand",
- "collapse": "Collapse"
+ "expand": "Развернуть",
+ "collapse": "Свернуть"
},
"workspace": {
- "fileNewName": "Name for new file",
- "invalidFilename": "Invalid filename.",
+ "fileNewName": "Имя нового файла",
+ "invalidFilename": "Неправильное имя файла",
"invalidExtension": "Файлы с расширением \".{0}\" не поддерживаются.",
- "newFileName": "New name for file",
- "deleteCurrentSketch": "Do you want to delete the current sketch?",
+ "newFileName": "Новое имя файла",
+ "deleteCurrentSketch": "Вы хотите удалить текущий скетч?",
"sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
}
},
diff --git a/i18n/sv_SE.json b/i18n/sv_SE.json
new file mode 100644
index 000000000..459770646
--- /dev/null
+++ b/i18n/sv_SE.json
@@ -0,0 +1,334 @@
+{
+ "arduino": {
+ "common": {
+ "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.",
+ "noBoardSelected": "No board selected",
+ "selectedOn": "on {0}",
+ "notConnected": "[not connected]",
+ "serialMonitor": "Serial Monitor",
+ "oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?",
+ "later": "Later",
+ "selectBoard": "Select Board",
+ "unknown": "Unknown",
+ "processing": "Processing",
+ "saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
+ "loseChanges": "If you don't save, your changes will be lost."
+ },
+ "menu": {
+ "sketch": "Sketch",
+ "tools": "Tools"
+ },
+ "debug": {
+ "optimizeForDebugging": "Optimize for Debugging",
+ "debugWithMessage": "Debug - {0}",
+ "noPlatformInstalledFor": "Platform is not installed for '{0}'",
+ "debuggingNotSupported": "Debugging is not supported by '{0}'"
+ },
+ "preferences": {
+ "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
+ "compile.verbose": "True for verbose compile output. False by default",
+ "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
+ "upload.verbose": "True for verbose upload output. False by default.",
+ "window.autoScale": "True if the user interface automatically scales with the font size.",
+ "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.",
+ "ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
+ "board.certificates": "List of certificates that can be uploaded to boards",
+ "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
+ "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
+ "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
+ "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
+ "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
+ "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
+ "auth.clientID": "The OAuth2 client ID.",
+ "auth.domain": "The OAuth2 domain.",
+ "auth.audience": "The OAuth2 audience.",
+ "auth.registerUri": "The URI used to register a new user.",
+ "network": "Network",
+ "sketchbook.location": "Sketchbook location",
+ "browse": "Browse",
+ "files.inside.sketches": "Show files inside Sketches",
+ "editorFontSize": "Editor font size",
+ "interfaceScale": "Interface scale",
+ "showVerbose": "Show verbose output during",
+ "compilerWarnings": "Compiler warnings",
+ "automatic": "Automatic",
+ "compile": "compile",
+ "upload": "upload",
+ "verifyAfterUpload": "Verify code after upload",
+ "checkForUpdates": "Check for updates on startup",
+ "editorQuickSuggestions": "Editor Quick Suggestions",
+ "additionalManagerURLs": "Additional Boards Manager URLs",
+ "noProxy": "No proxy",
+ "manualProxy": "Manual proxy configuration",
+ "newSketchbookLocation": "Select new sketchbook location",
+ "choose": "Choose",
+ "enterAdditionalURLs": "Enter additional URLs, one for each row",
+ "unofficialBoardSupport": "Click for a list of unofficial board support URLs",
+ "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
+ "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
+ "invalid.theme": "Invalid theme."
+ },
+ "cloud": {
+ "signIn": "SIGN IN",
+ "signOut": "Sign Out",
+ "chooseSketchVisibility": "Choose visibility of your Sketch:",
+ "privateVisibility": "Private. Only you can view the Sketch.",
+ "publicVisibility": "Public. Anyone with the link can view the Sketch.",
+ "link": "Link:",
+ "embed": "Embed:",
+ "cloudSketchbook": "Cloud Sketchbook",
+ "shareSketch": "Share Sketch",
+ "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
+ "pullSketch": "Pull Sketch",
+ "openInCloudEditor": "Open in Cloud Editor",
+ "options": "Options...",
+ "share": "Share...",
+ "remote": "Remote",
+ "emptySketchbook": "Your Sketchbook is empty",
+ "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
+ "signInToCloud": "Sign in to Arduino Cloud",
+ "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
+ "learnMore": "Learn more",
+ "continue": "Continue",
+ "pushSketch": "Push Sketch",
+ "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
+ "pull": "Pull",
+ "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
+ "donePulling": "Done pulling ‘{0}’.",
+ "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
+ "push": "Push",
+ "pullFirst": "You have to pull first to be able to push to the Cloud.",
+ "donePushing": "Done pushing ‘{0}’.",
+ "connected": "Connected",
+ "offline": "Offline",
+ "profilePicture": "Profile picture"
+ },
+ "board": {
+ "installManually": "Install Manually",
+ "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
+ "configDialogTitle": "Select Other Board & Port",
+ "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
+ "configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
+ "pleasePickBoard": "Please pick a board connected to the port you have selected.",
+ "showAllAvailablePorts": "Shows all available ports when enabled",
+ "programmer": "Programmer",
+ "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
+ "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}",
+ "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
+ "reselectLater": "Reselect later",
+ "noneSelected": "No boards selected.",
+ "noPortsSelected": "No ports selected for board: '{0}'.",
+ "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
+ "openBoardsConfig": "Select other board and port…",
+ "boardListItem": "{0} at {1}",
+ "selectBoardForInfo": "Please select a board to obtain board info.",
+ "platformMissing": "The platform for the selected '{0}' board is not installed.",
+ "selectPortForInfo": "Please select a port to obtain board info.",
+ "boardInfo": "Board Info",
+ "board": "Board{0}",
+ "port": "Port{0}",
+ "getBoardInfo": "Get Board Info",
+ "inSketchbook": " (in Sketchbook)"
+ },
+ "boardsManager": "Boards Manager",
+ "about": {
+ "label": "About {0}",
+ "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
+ },
+ "contributions": {
+ "addFile": "Add File",
+ "replaceTitle": "Replace",
+ "fileAdded": "One file added to the sketch."
+ },
+ "replaceMsg": "Replace the existing version of {0}?",
+ "library": {
+ "addZip": "Add .ZIP Library...",
+ "zipLibrary": "Library",
+ "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
+ "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
+ "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
+ "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
+ "include": "Include Library",
+ "manageLibraries": "Manage Libraries...",
+ "arduinoLibraries": "Arduino libraries",
+ "contributedLibraries": "Contributed libraries",
+ "title": "Library Manager",
+ "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
+ "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
+ "installOneMissingDependency": "Would you like to install the missing dependency?",
+ "installMissingDependencies": "Would you like to install all the missing dependencies?",
+ "dependenciesForLibrary": "Dependencies for library {0}:{1}",
+ "installAll": "Install all",
+ "installOnly": "Install {0} only",
+ "installedSuccessfully": "Successfully installed library {0}:{1}",
+ "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}"
+ },
+ "selectZip": "Select a zip file containing the library you'd like to add",
+ "sketch": {
+ "archiveSketch": "Archive Sketch",
+ "saveSketchAs": "Save sketch folder as...",
+ "createdArchive": "Created archive '{0}'.",
+ "new": "New",
+ "openRecent": "Open Recent",
+ "showFolder": "Show Sketch Folder",
+ "sketch": "Sketch",
+ "moving": "Moving",
+ "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
+ "cantOpen": "A folder named \"{0}\" already exists. Can't open sketch.",
+ "saveFolderAs": "Save sketch folder as...",
+ "sketchbook": "Sketchbook",
+ "upload": "Upload",
+ "uploadUsingProgrammer": "Upload Using Programmer",
+ "userFieldsNotFoundError": "Can't find user fields for connected board",
+ "doneUploading": "Done uploading.",
+ "configureAndUpload": "Configure And Upload",
+ "verifyOrCompile": "Verify/Compile",
+ "exportBinary": "Export Compiled Binary",
+ "verify": "Verify",
+ "doneCompiling": "Done compiling.",
+ "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
+ "openSketchInNewWindow": "Open Sketch in New Window",
+ "openFolder": "Open Folder",
+ "titleLocalSketchbook": "Local Sketchbook",
+ "titleSketchbook": "Sketchbook",
+ "close": "Are you sure you want to close the sketch?"
+ },
+ "bootloader": {
+ "burnBootloader": "Burn Bootloader",
+ "doneBurningBootloader": "Done burning bootloader."
+ },
+ "editor": {
+ "copyForForum": "Copy for Forum (Markdown)",
+ "commentUncomment": "Comment/Uncomment",
+ "increaseIndent": "Increase Indent",
+ "decreaseIndent": "Decrease Indent",
+ "increaseFontSize": "Increase Font Size",
+ "decreaseFontSize": "Decrease Font Size",
+ "autoFormat": "Auto Format"
+ },
+ "examples": {
+ "menu": "Examples",
+ "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "builtInExamples": "Built-in examples",
+ "customLibrary": "Examples from Custom Libraries",
+ "for": "Examples for {0}",
+ "forAny": "Examples for any board"
+ },
+ "help": {
+ "search": "Search on Arduino.cc",
+ "keyword": "Type a keyword",
+ "gettingStarted": "Getting Started",
+ "environment": "Environment",
+ "troubleshooting": "Troubleshooting",
+ "reference": "Reference",
+ "findInReference": "Find in Reference",
+ "faq": "Frequently Asked Questions",
+ "visit": "Visit Arduino.cc"
+ },
+ "certificate": {
+ "uploadRootCertificates": "Upload SSL Root Certificates",
+ "openContext": "Open context",
+ "remove": "Remove",
+ "upload": "Upload",
+ "addURL": "Add URL to fetch SSL certificate",
+ "enterURL": "Enter URL",
+ "selectCertificateToUpload": "1. Select certificate to upload",
+ "addNew": "Add New",
+ "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
+ "uploadingCertificates": "Uploading certificates.",
+ "certificatesUploaded": "Certificates uploaded.",
+ "uploadFailed": "Upload failed. Please try again.",
+ "selectBoard": "Select a board...",
+ "boardAtPort": "{0} at {1}",
+ "noSupportedBoardConnected": "No supported board connected"
+ },
+ "firmware": {
+ "updater": "WiFi101 / WiFiNINA Firmware Updater",
+ "selectBoard": "Select Board",
+ "checkUpdates": "Check Updates",
+ "selectVersion": "Select firmware version",
+ "install": "Install",
+ "overwriteSketch": "Installation will overwrite the Sketch on the board.",
+ "installingFirmware": "Installing firmware.",
+ "successfullyInstalled": "Firmware succesfully installed.",
+ "failedInstall": "Installation failed. Please try again."
+ },
+ "dialog": {
+ "dontAskAgain": "Don't ask again"
+ },
+ "userFields": {
+ "cancel": "Cancel",
+ "upload": "Upload"
+ },
+ "serial": {
+ "toggleTimestamp": "Toggle Timestamp",
+ "autoscroll": "Autoscroll",
+ "timestamp": "Timestamp",
+ "noLineEndings": "No Line Ending",
+ "newLine": "New Line",
+ "carriageReturn": "Carriage Return",
+ "newLineCarriageReturn": "Both NL & CR",
+ "notConnected": "Not connected. Select a board and a port to connect automatically.",
+ "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
+ "connectionBusy": "Connection failed. Serial port is busy: {0}",
+ "disconnected": "Disconnected {0} from {1}.",
+ "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
+ "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
+ "reconnect": "Reconnecting {0} to {1} in {2} seconds..."
+ },
+ "component": {
+ "uninstall": "Uninstall",
+ "uninstallMsg": "Do you want to uninstall {0}?",
+ "by": "by",
+ "version": "Version {0}",
+ "moreInfo": "More info",
+ "install": "INSTALL",
+ "filterSearch": "Filter your search..."
+ },
+ "electron": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "unsavedChanges": "Any unsaved changes will not be saved."
+ },
+ "compile": {
+ "error": "Compilation error: {0}"
+ },
+ "upload": {
+ "error": "{0} error: {1}"
+ },
+ "burnBootloader": {
+ "error": "Error while burning the bootloader: {0}"
+ }
+ },
+ "theia": {
+ "core": {
+ "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
+ "offline": "Offline",
+ "daemonOffline": "CLI Daemon Offline",
+ "cannotConnectBackend": "Cannot connect to the backend.",
+ "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ },
+ "debug": {
+ "start": "Start...",
+ "typeNotSupported": "The debug session type \"{0}\" is not supported.",
+ "startError": "There was an error starting the debug session, check the logs for more details."
+ },
+ "editor": {
+ "unsavedTitle": "Unsaved – {0}"
+ },
+ "messages": {
+ "expand": "Expand",
+ "collapse": "Collapse"
+ },
+ "workspace": {
+ "fileNewName": "Name for new file",
+ "invalidFilename": "Invalid filename.",
+ "invalidExtension": ".{0} is not a valid extension",
+ "newFileName": "New name for file",
+ "deleteCurrentSketch": "Do you want to delete the current sketch?",
+ "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
+ }
+ },
+ "cloud": {
+ "GoToCloud": "GO TO CLOUD"
+ }
+}
diff --git a/i18n/zh.json b/i18n/zh.json
index c788ff236..75491ecc2 100644
--- a/i18n/zh.json
+++ b/i18n/zh.json
@@ -1,334 +1,334 @@
{
"arduino": {
"common": {
- "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.",
- "noBoardSelected": "No board selected",
- "selectedOn": "on {0}",
- "notConnected": "[not connected]",
+ "offlineIndicator": "你似乎处于离线状态。如果没有网络连接，Arduino CLI可能无法下载所需的资源，并可能导致故障。请连接网络并重新启动程序。",
+ "noBoardSelected": "没有选择开发板",
+ "selectedOn": "关于{0}",
+ "notConnected": "[没有连接]",
"serialMonitor": "串口监视器",
- "oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?",
- "later": "Later",
- "selectBoard": "Select Board",
- "unknown": "Unknown",
- "processing": "Processing",
- "saveChangesToSketch": "Do you want to save changes to this sketch before closing?",
- "loseChanges": "If you don't save, your changes will be lost."
+ "oldFormat": "{0}仍然使用旧的.pde格式。是否要切换到新的.ino扩展？",
+ "later": "之后",
+ "selectBoard": "选择开发板",
+ "unknown": "未知",
+ "processing": "处理",
+ "saveChangesToSketch": "是否要在关闭前保存对此项目所做的更改？",
+ "loseChanges": "如果不保存，所做的更改将丢失。"
},
"menu": {
"sketch": "项目",
"tools": "工具"
},
"debug": {
- "optimizeForDebugging": "Optimize for Debugging",
- "debugWithMessage": "Debug - {0}",
- "noPlatformInstalledFor": "Platform is not installed for '{0}'",
- "debuggingNotSupported": "Debugging is not supported by '{0}'"
+ "optimizeForDebugging": "优化调试",
+ "debugWithMessage": "调试 - {0}",
+ "noPlatformInstalledFor": "{0}平台未安装",
+ "debuggingNotSupported": "{0}不支持调试"
},
"preferences": {
- "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
- "compile.verbose": "True for verbose compile output. False by default",
- "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default",
- "upload.verbose": "True for verbose upload output. False by default.",
- "window.autoScale": "True if the user interface automatically scales with the font size.",
- "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.",
- "ide.autoUpdate": "True to enable automatic update checks. The IDE will check for updates automatically and periodically.",
- "board.certificates": "List of certificates that can be uploaded to boards",
- "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
- "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
- "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
- "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
- "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
- "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
- "auth.clientID": "The OAuth2 client ID.",
- "auth.domain": "The OAuth2 domain.",
- "auth.audience": "The OAuth2 audience.",
- "auth.registerUri": "The URI used to register a new user.",
+ "language.log": "True则Arduino语言服务器将日志文件生成到项目文件夹中。默认为false。",
+ "compile.verbose": "True则输出详细编译信息。默认为False",
+ "compile.warnings": "设置gcc警告级别。默认为None",
+ "upload.verbose": "True则输出详细上传信息。默认情况下为False。",
+ "window.autoScale": "True则用户界面随字体大小自动缩放。",
+ "window.zoomLevel": "调整窗口的缩放级别。默认缩放级别为0，大于（例如1）或小于（例如-1）的每个增量表示放大或缩小20%。输入小数可以更精细的调整缩放级别。",
+ "ide.autoUpdate": "True则启用自动更新。IDE将定期检查更新。",
+ "board.certificates": "可上传到开发板的证书列表",
+ "sketchbook.showAllFiles": "True则显示项目中的所有项目文件。默认情况下为false。",
+ "cloud.enabled": "True则启用项目同步功能。默认为true。",
+ "cloud.pull.warn": "True则在拉取云项目之前警告用户。默认为true。",
+ "cloud.push.warn": "True则在推送云项目之前警告用户。默认为true。",
+ "cloud.pushpublic.warn": "True则将公开项目推送到云中之前警告用户。默认为true。",
+ "cloud.sketchSyncEnpoint": "用于从后台推送项目的端点。默认情况下，它指向Arduino云API。",
+ "auth.clientID": "OAuth2客户端ID",
+ "auth.domain": "OAuth2域",
+ "auth.audience": "OAuth2 受众。",
+ "auth.registerUri": "用于注册新用户的网址。",
"network": "网络",
- "sketchbook.location": "Sketchbook location",
+ "sketchbook.location": "项目文件夹地址",
"browse": "浏览",
- "files.inside.sketches": "Show files inside Sketches",
- "editorFontSize": "Editor font size",
- "interfaceScale": "Interface scale",
- "showVerbose": "Show verbose output during",
- "compilerWarnings": "Compiler warnings",
+ "files.inside.sketches": "在项目中显示文件",
+ "editorFontSize": "编辑器字体大小",
+ "interfaceScale": "界面比例",
+ "showVerbose": "显示过程的详细输出",
+ "compilerWarnings": "编译器警告",
"automatic": " 自动调整",
- "compile": "compile",
- "upload": "upload",
- "verifyAfterUpload": "Verify code after upload",
+ "compile": "编译",
+ "upload": "上传",
+ "verifyAfterUpload": "上传后验证代码",
"checkForUpdates": "启动时检查更新",
- "editorQuickSuggestions": "Editor Quick Suggestions",
+ "editorQuickSuggestions": "编辑快速建议",
"additionalManagerURLs": "附加开发板管理器网址",
- "noProxy": "No proxy",
- "manualProxy": "Manual proxy configuration",
- "newSketchbookLocation": "Select new sketchbook location",
- "choose": "Choose",
- "enterAdditionalURLs": "Enter additional URLs, one for each row",
- "unofficialBoardSupport": "Click for a list of unofficial board support URLs",
- "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
- "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
- "invalid.theme": "Invalid theme."
+ "noProxy": "无代理",
+ "manualProxy": "手动配置代理",
+ "newSketchbookLocation": "选择新的项目文件夹地址",
+ "choose": "选择",
+ "enterAdditionalURLs": "输入其他网址，每行一个。",
+ "unofficialBoardSupport": "点击获取支持的非官方开发板网址列表",
+ "invalid.sketchbook.location": "无效的项目文件夹地址：{0}",
+ "invalid.editorFontSize": "编辑器字体大小无效。它必须是正整数。",
+ "invalid.theme": "无效的主题。"
},
"cloud": {
- "signIn": "SIGN IN",
- "signOut": "Sign Out",
- "chooseSketchVisibility": "Choose visibility of your Sketch:",
- "privateVisibility": "Private. Only you can view the Sketch.",
- "publicVisibility": "Public. Anyone with the link can view the Sketch.",
- "link": "Link:",
- "embed": "Embed:",
- "cloudSketchbook": "Cloud Sketchbook",
- "shareSketch": "Share Sketch",
- "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
- "pullSketch": "Pull Sketch",
- "openInCloudEditor": "Open in Cloud Editor",
- "options": "Options...",
- "share": "Share...",
- "remote": "Remote",
- "emptySketchbook": "Your Sketchbook is empty",
- "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches.",
- "signInToCloud": "Sign in to Arduino Cloud",
- "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
- "learnMore": "Learn more",
- "continue": "Continue",
- "pushSketch": "Push Sketch",
- "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
- "pull": "Pull",
- "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
- "donePulling": "Done pulling ‘{0}’.",
- "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
- "push": "Push",
- "pullFirst": "You have to pull first to be able to push to the Cloud.",
- "donePushing": "Done pushing ‘{0}’.",
- "connected": "Connected",
- "offline": "Offline",
- "profilePicture": "Profile picture"
+ "signIn": "登录",
+ "signOut": "退出登录",
+ "chooseSketchVisibility": "选择项目的可见性：",
+ "privateVisibility": "私有的。只有你可以查看项目。",
+ "publicVisibility": "公开的。有链接的人都可以查看项目。",
+ "link": "链接：",
+ "embed": "嵌入：",
+ "cloudSketchbook": "云项目文件夹",
+ "shareSketch": "共享项目",
+ "showHideRemoveSketchbook": "显示/隐藏远程项目文件夹",
+ "pullSketch": "拉取项目",
+ "openInCloudEditor": "在云编辑器打开",
+ "options": "选项。。。",
+ "share": "共享。。。",
+ "remote": "远程",
+ "emptySketchbook": "你的项目文件夹是空的",
+ "visitArduinoCloud": "访问Arduino云以创建云项目。",
+ "signInToCloud": "登录Arduino云",
+ "syncEditSketches": "同步和编辑Arduino云项目",
+ "learnMore": "查看更多",
+ "continue": "继续",
+ "pushSketch": "推送项目",
+ "pushSketchMsg": "这是公开的项目。推送前，确保在arduino_secrets.h中明确了所有敏感信息。可以从共享界面将项目设为私人项目。",
+ "pull": "拉取",
+ "pullSketchMsg": "从云中拉取此项目将覆盖其本地项目。你确定要继续吗？",
+ "donePulling": "已完成拉取{0}。",
+ "notYetPulled": "无法推送到云。未被拉取。",
+ "push": "推送",
+ "pullFirst": "你必须先拉取才能推送到云。",
+ "donePushing": "已完成推送{0}。",
+ "connected": "连接",
+ "offline": "离线",
+ "profilePicture": "资料图片"
},
"board": {
- "installManually": "Install Manually",
- "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
- "configDialogTitle": "Select Other Board & Port",
- "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
- "configDialog2": "If you only select a Board you will be able just to compile, but not to upload your sketch.",
- "pleasePickBoard": "Please pick a board connected to the port you have selected.",
- "showAllAvailablePorts": "Shows all available ports when enabled",
- "programmer": "Programmer",
- "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
- "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}",
- "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
- "reselectLater": "Reselect later",
- "noneSelected": "No boards selected.",
- "noPortsSelected": "No ports selected for board: '{0}'.",
- "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
- "openBoardsConfig": "Select other board and port…",
- "boardListItem": "{0} at {1}",
- "selectBoardForInfo": "Please select a board to obtain board info.",
- "platformMissing": "The platform for the selected '{0}' board is not installed.",
- "selectPortForInfo": "Please select a port to obtain board info.",
+ "installManually": "手动安装",
+ "installNow": "必须为当前选定的{2}开发板板安装{0}{1}内核。你想现在安装吗？",
+ "configDialogTitle": "选择其他开发板和端口",
+ "configDialog1": "如果要上传项目，请选择开发板和端口。",
+ "configDialog2": "如果你只选择开发板，那么只能编译，不能上传项目。",
+ "pleasePickBoard": "请选择要连接的开发板。",
+ "showAllAvailablePorts": "启用时显示所有可用端口",
+ "programmer": "编程器",
+ "succesfullyInstalledPlatform": "已成功安装平台{0}:{1}",
+ "succesfullyUninstalledPlatform": "已成功卸载平台{0}:{1}",
+ "couldNotFindPreviouslySelected": "在安装的平台{1}中找不到以前选择的开发板{0}。请手动重新选择要使用的开发板。你想现在重新选择它吗？",
+ "reselectLater": "稍后重新选择",
+ "noneSelected": "未选择任何开发板。",
+ "noPortsSelected": "没有为开发板{0}选择端口。",
+ "noFQBN": "FQBN不可用于所选开发板{0}。你是否安装了相应的内核？",
+ "openBoardsConfig": "选择其他开发板和端口。。。",
+ "boardListItem": "{0} 在 {1}",
+ "selectBoardForInfo": "请选择一个开发板以获取开发板信息。",
+ "platformMissing": "未安装所选{0}开发板的平台。",
+ "selectPortForInfo": "请选择一个端口以获取开发板信息。",
"boardInfo": "开发板信息",
- "board": "Board{0}",
- "port": "Port{0}",
- "getBoardInfo": "Get Board Info",
- "inSketchbook": " (in Sketchbook)"
+ "board": "开发板{0}",
+ "port": "端口{0}",
+ "getBoardInfo": "获得开发板信息",
+ "inSketchbook": "（在项目文件夹中）"
},
"boardsManager": "开发板管理器",
"about": {
- "label": "About {0}",
- "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}"
+ "label": "关于{0}",
+ "detail": "版本：{0}\n日期：{1}{2}\nCLI版本：{3}{4}[{5}]{6}"
},
"contributions": {
- "addFile": " 添加文件...",
- "replaceTitle": "Replace",
- "fileAdded": "One file added to the sketch."
+ "addFile": "添加文件",
+ "replaceTitle": "替换",
+ "fileAdded": "将一个文件添加到项目中。"
},
- "replaceMsg": "Replace the existing version of {0}?",
+ "replaceMsg": "是否替换{0}的现有版本？",
"library": {
"addZip": "添加 .ZIP 库...",
- "zipLibrary": "Library",
- "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
- "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
- "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
- "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
- "include": "Include Library",
- "manageLibraries": "Manage Libraries...",
- "arduinoLibraries": "Arduino libraries",
- "contributedLibraries": "Contributed libraries",
- "title": "Library Manager",
- "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:",
- "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:",
- "installOneMissingDependency": "Would you like to install the missing dependency?",
- "installMissingDependencies": "Would you like to install all the missing dependencies?",
- "dependenciesForLibrary": "Dependencies for library {0}:{1}",
- "installAll": "Install all",
- "installOnly": "Install {0} only",
- "installedSuccessfully": "Successfully installed library {0}:{1}",
- "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}"
+ "zipLibrary": "库",
+ "overwriteExistingLibrary": "是否覆盖现有的库？",
+ "successfullyInstalledZipLibrary": "已从{0}存档成功安装库",
+ "namedLibraryAlreadyExists": "名为{0}的库文件夹已存在。是否要覆盖它？",
+ "libraryAlreadyExists": "库已经存在。是否要覆盖它？",
+ "include": "包含库",
+ "manageLibraries": "管理库。。。",
+ "arduinoLibraries": "arduino库",
+ "contributedLibraries": "贡献库",
+ "title": "库管理",
+ "needsOneDependency": "库{0}:{1}需要一些未安装的依赖：",
+ "needsMultipleDependencies": "库{0}:{1}需要一些未安装的依赖：",
+ "installOneMissingDependency": "是否安装缺少的依赖？",
+ "installMissingDependencies": "是否安装所有缺少的依赖？",
+ "dependenciesForLibrary": "库{0}的依赖：{1}",
+ "installAll": "全部安装",
+ "installOnly": "仅安装{0}",
+ "installedSuccessfully": "已成功安装库{0}:{1}",
+ "uninstalledSuccessfully": "已成功卸载库{0}:{1}"
},
- "selectZip": "Select a zip file containing the library you'd like to add",
+ "selectZip": "选择包含要添加的库的zip文件",
"sketch": {
"archiveSketch": "项目存档",
- "saveSketchAs": "Save sketch folder as...",
- "createdArchive": "Created archive '{0}'.",
- "new": "New",
- "openRecent": "Open Recent",
- "showFolder": "Show Sketch Folder",
- "sketch": "Sketch",
- "moving": "Moving",
- "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named as \"{1}\".\nCreate this folder, move the file, and continue?",
+ "saveSketchAs": "将项目文件夹另存为。。。",
+ "createdArchive": "已创建存档文件{0}。",
+ "new": "新建",
+ "openRecent": "打开最近",
+ "showFolder": "显示项目文件夹",
+ "sketch": "项目",
+ "moving": "移动",
+ "movingMsg": "文件{0}需要在{1}的项目文件夹中。\n创建此文件夹，移动文件，然后继续？",
"cantOpen": "文件夹\"{0}\"已存在。无法打开项目。",
- "saveFolderAs": "Save sketch folder as...",
- "sketchbook": "Sketchbook",
+ "saveFolderAs": "将项目文件夹另存为。。。",
+ "sketchbook": "项目文件夹",
"upload": "上传",
- "uploadUsingProgrammer": "Upload Using Programmer",
- "userFieldsNotFoundError": "Can't find user fields for connected board",
- "doneUploading": "Done uploading.",
- "configureAndUpload": "Configure And Upload",
- "verifyOrCompile": "Verify/Compile",
- "exportBinary": "Export Compiled Binary",
- "verify": "Verify",
- "doneCompiling": "Done compiling.",
- "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
- "openSketchInNewWindow": "Open Sketch in New Window",
- "openFolder": "Open Folder",
- "titleLocalSketchbook": "Local Sketchbook",
- "titleSketchbook": "Sketchbook",
- "close": "Are you sure you want to close the sketch?"
+ "uploadUsingProgrammer": "使用编程器上传",
+ "userFieldsNotFoundError": "找不到已连接开发板的用户字段",
+ "doneUploading": "上传完成",
+ "configureAndUpload": "配置和上传",
+ "verifyOrCompile": "验证/编译",
+ "exportBinary": "导出已编译的二进制文件",
+ "verify": "验证",
+ "doneCompiling": "编译完成",
+ "couldNotConnectToSerial": "无法重新连接到串行端口。{0}",
+ "openSketchInNewWindow": "在新窗口打开项目",
+ "openFolder": "打开文件夹",
+ "titleLocalSketchbook": "本地项目文件夹",
+ "titleSketchbook": "项目文件夹",
+ "close": "是否确实要关闭项目？"
},
"bootloader": {
"burnBootloader": "烧录引导程序",
- "doneBurningBootloader": "Done burning bootloader."
+ "doneBurningBootloader": "完成烧录引导程序。"
},
"editor": {
- "copyForForum": "Copy for Forum (Markdown)",
+ "copyForForum": "复制到论坛（Markdown）",
"commentUncomment": "注释/取消注释",
- "increaseIndent": "Increase Indent",
- "decreaseIndent": "Decrease Indent",
- "increaseFontSize": "Increase Font Size",
+ "increaseIndent": "增加缩进",
+ "decreaseIndent": "减少缩进",
+ "increaseFontSize": "放大字体",
"decreaseFontSize": "减小字号",
"autoFormat": "自动格式化"
},
"examples": {
- "menu": "Examples",
- "couldNotInitializeExamples": "Could not initialize built-in examples.",
+ "menu": "示例",
+ "couldNotInitializeExamples": "无法初始化内置示例。",
"builtInExamples": "内置示例",
- "customLibrary": "Examples from Custom Libraries",
- "for": "Examples for {0}",
- "forAny": "Examples for any board"
+ "customLibrary": "来自自定义库的示例",
+ "for": "{0}的示例",
+ "forAny": "任何开发板的示例"
},
"help": {
- "search": "Search on Arduino.cc",
- "keyword": "Type a keyword",
- "gettingStarted": "Getting Started",
- "environment": "Environment",
- "troubleshooting": "Troubleshooting",
- "reference": "Reference",
- "findInReference": "Find in Reference",
- "faq": "Frequently Asked Questions",
- "visit": "Visit Arduino.cc"
+ "search": "在Arduino.cc搜索",
+ "keyword": "输入关键字",
+ "gettingStarted": "入门",
+ "environment": "环境",
+ "troubleshooting": "故障排除",
+ "reference": "参考",
+ "findInReference": "在参考文件寻找",
+ "faq": "常见问题",
+ "visit": "访问Arduino.cc"
},
"certificate": {
- "uploadRootCertificates": "Upload SSL Root Certificates",
- "openContext": "Open context",
+ "uploadRootCertificates": "上传SSL证书",
+ "openContext": "打开上下文",
"remove": "删除",
"upload": "上传",
- "addURL": "Add URL to fetch SSL certificate",
- "enterURL": "Enter URL",
- "selectCertificateToUpload": "1. Select certificate to upload",
- "addNew": "Add New",
- "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
- "uploadingCertificates": "Uploading certificates.",
- "certificatesUploaded": "Certificates uploaded.",
- "uploadFailed": "Upload failed. Please try again.",
- "selectBoard": "Select a board...",
- "boardAtPort": "{0} at {1}",
- "noSupportedBoardConnected": "No supported board connected"
+ "addURL": "添加网址以获取SSL证书",
+ "enterURL": "输入网址",
+ "selectCertificateToUpload": "1.选择要上传的证书",
+ "addNew": "添加新的",
+ "selectDestinationBoardToUpload": "2.选择开发板并上传证书",
+ "uploadingCertificates": "上传证书。",
+ "certificatesUploaded": "证书已上传。",
+ "uploadFailed": "上传失败。请再试一次。",
+ "selectBoard": "选择开发板。。。",
+ "boardAtPort": "{0}在{1}",
+ "noSupportedBoardConnected": "未连接受支持的开发板"
},
"firmware": {
- "updater": "WiFi101 / WiFiNINA Firmware Updater",
- "selectBoard": "Select Board",
- "checkUpdates": "Check Updates",
- "selectVersion": "Select firmware version",
+ "updater": "WiFi101/WiFiNINA固件更新程序",
+ "selectBoard": "选择开发板",
+ "checkUpdates": "检查更新",
+ "selectVersion": "选择固件版本",
"install": "安装",
- "overwriteSketch": "Installation will overwrite the Sketch on the board.",
- "installingFirmware": "Installing firmware.",
- "successfullyInstalled": "Firmware succesfully installed.",
- "failedInstall": "Installation failed. Please try again."
+ "overwriteSketch": "安装将覆盖开发板上的项目。",
+ "installingFirmware": "安装固件",
+ "successfullyInstalled": "固件已成功安装。",
+ "failedInstall": "安装失败。请再试一次。"
},
"dialog": {
- "dontAskAgain": "Don't ask again"
+ "dontAskAgain": "不要再请求"
},
"userFields": {
- "cancel": "Cancel",
+ "cancel": "取消",
"upload": "上传"
},
"serial": {
- "toggleTimestamp": "Toggle Timestamp",
+ "toggleTimestamp": "切换时间戳",
"autoscroll": "自动滚屏",
- "timestamp": "Timestamp",
+ "timestamp": "时间戳",
"noLineEndings": "没有结束符",
- "newLine": "换行符",
+ "newLine": "换行",
"carriageReturn": "回车",
"newLineCarriageReturn": "NL 和 CR",
- "notConnected": "Not connected. Select a board and a port to connect automatically.",
- "message": "Message ({0} + Enter to send message to '{1}' on '{2}'",
- "connectionBusy": "Connection failed. Serial port is busy: {0}",
- "disconnected": "Disconnected {0} from {1}.",
- "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}.",
- "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
- "reconnect": "Reconnecting {0} to {1} in {2} seconds..."
+ "notConnected": "没有连接。选择要自动连接的开发板和端口。",
+ "message": "消息（{0} + Enter 将消息发送到{2}上的{1}",
+ "connectionBusy": "连接失败。串行端口被占用：{0}",
+ "disconnected": "已断开{0}与{1}的连接。",
+ "unexpectedError": "意外错误。正在重新连接端口{1}上的{0}。",
+ "failedReconnect": "连续尝试10次后，无法将{0}重新连接到串行端口。{1}串行端口被占用。",
+ "reconnect": "正在{2}秒内将{0}重新连接到{1}。。。"
},
"component": {
- "uninstall": "Uninstall",
- "uninstallMsg": "Do you want to uninstall {0}?",
- "by": "by",
+ "uninstall": "卸载",
+ "uninstallMsg": "是否要卸载{0}？",
+ "by": "通过",
"version": "版本 {0}",
- "moreInfo": "More info",
+ "moreInfo": "更多信息",
"install": "安装",
"filterSearch": "对搜索进行过滤..."
},
"electron": {
- "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
- "unsavedChanges": "Any unsaved changes will not be saved."
+ "couldNotSave": "无法保存草图。请将未保存的工作复制到你喜爱的文本编辑器中，然后重新启动IDE。",
+ "unsavedChanges": "将不会保存任何未保存的更改。"
},
"compile": {
- "error": "Compilation error: {0}"
+ "error": "编译错误：{0}"
},
"upload": {
- "error": "{0} error: {1}"
+ "error": "{0}错误：{1}"
},
"burnBootloader": {
- "error": "Error while burning the bootloader: {0}"
+ "error": "烧录引导程序时出错：{0}"
}
},
"theia": {
"core": {
- "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
- "offline": "Offline",
- "daemonOffline": "CLI Daemon Offline",
- "cannotConnectBackend": "Cannot connect to the backend.",
- "cannotConnectDaemon": "Cannot connect to the CLI daemon."
+ "couldNotSave": "无法保存项目。请将未保存的工作复制到您喜爱的文本编辑器中，然后重新启动IDE。",
+ "offline": "离线",
+ "daemonOffline": "CLI进程离线",
+ "cannotConnectBackend": "无法连接后台。",
+ "cannotConnectDaemon": "无法连接CLI进程。"
},
"debug": {
- "start": "Start...",
- "typeNotSupported": "The debug session type \"{0}\" is not supported.",
- "startError": "There was an error starting the debug session, check the logs for more details."
+ "start": "开始。。。",
+ "typeNotSupported": "不支持调试会话的类型{0}。",
+ "startError": "启动调试会话时出错，请检查日志以了解更多详细信息。"
},
"editor": {
- "unsavedTitle": "Unsaved – {0}"
+ "unsavedTitle": "未保存–{0}"
},
"messages": {
- "expand": "Expand",
- "collapse": "Collapse"
+ "expand": "扩展",
+ "collapse": "崩溃"
},
"workspace": {
- "fileNewName": "Name for new file",
- "invalidFilename": "Invalid filename.",
+ "fileNewName": "新文件的名称",
+ "invalidFilename": "无效的文件名。",
"invalidExtension": "“.{0}”不是有效扩展名",
- "newFileName": "New name for file",
- "deleteCurrentSketch": "Do you want to delete the current sketch?",
- "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
+ "newFileName": "文件的新名称",
+ "deleteCurrentSketch": "是否要删除当前项目？",
+ "sketchDirectoryError": "创建项目目录时出错。有关更多详细信息，请参阅日志。应用程序可能无法按预期工作。"
}
},
"cloud": {
- "GoToCloud": "GO TO CLOUD"
+ "GoToCloud": "前往云"
}
}