tm4c_cmsis.h

//****************************************************************************
// This TM4C CMSIS file has been adapted from lm3s_cmsis.h
// Quantum Leaps on 09-Nov-2015
// www.state-machine.com
//****************************************************************************

//****************************************************************************
//
// Copyright (c) 2009 Luminary Micro, Inc.  All rights reserved.
// Software License Agreement
//
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's microcontroller products.
//
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws.  All rights are reserved.  You may not combine
// this software with "viral" open-source software in order to form a larger
// program.  Any use in violation of the foregoing restrictions may subject
// the user to criminal sanctions under applicable laws, as well as to civil
// liability for the breach of the terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 32 of the Stellaris CMSIS Package.
//
//****************************************************************************

#ifndef __TM4C_CMSIS_H__
#define __TM4C_CMSIS_H__

/*
 * ===========================================================================
 * ---------- Interrupt Number Definition ------------------------------------
 * ===========================================================================
 */
typedef enum IRQn {
/******  Cortex-M4 Processor Exceptions Numbers *****************************/
    Reset_IRQn = -15,               /*!< -15 Reset Vector                   */
    NonMaskableInt_IRQn,            /*!< -14 Non Maskable Interrupt         */
    HardFault_IRQn,                 /*!< -13 Cortex-M3 Hard Fault Int       */
    MemoryManagement_IRQn,          /*!< -12 Cortex-M3 Memory Management    */
    BusFault_IRQn,                  /*!< -11 Cortex-M3 Bus Fault Int        */
    UsageFault_IRQn,                /*!< -10 Cortex-M3 Usage Fault Int      */
    Reserved1_IRQn,
    Reserved2_IRQn,
    Reserved3_IRQn,
    Reserved4_IRQn,
    SVCall_IRQn,                    /*!< -5 Cortex-M3 SV Call Interrupt     */
    DebugMonitor_IRQn,              /*!< -4 Cortex-M3 Debug Monitor Int     */
    Reserved5_IRQn,
    PendSV_IRQn,                    /*!< -2 Cortex-M3 Pend SV Interrupt     */
    SysTick_IRQn,                   /*!< -1 Cortex-M3 System Tick Interrupt */

/******  TM4C Specific Interrupt Numbers ************************************/
    GPIOPortA_IRQn,                 /*!< GPIO Port A                        */
    GPIOPortB_IRQn,                 /*!< GPIO Port B                        */
    GPIOPortC_IRQn,                 /*!< GPIO Port C                        */
    GPIOPortD_IRQn,                 /*!< GPIO Port D                        */
    GPIOPortE_IRQn,                 /*!< GPIO Port E                        */
    UART0_IRQn,                     /*!< UART0                              */
    UART1_IRQn,                     /*!< UART1                              */
    SSI0_IRQn,                      /*!< SSI0                               */
    I2C0_IRQn,                      /*!< I2C0                               */
    PWMFault_IRQn,                  /*!< PWM Fault                          */
    PWMGen0_IRQn,                   /*!< PWM Generator 0                    */
    PWMGen1_IRQn,                   /*!< PWM Generator 1                    */
    PWMGen2_IRQn,                   /*!< PWM Generator 2                    */
    QEI0_IRQn,                      /*!< Quadrature Encoder 0               */
    ADCSeq0_IRQn,                   /*!< ADC Sequence 0                     */
    ADCSeq1_IRQn,                   /*!< ADC Sequence 1                     */
    ADCSeq2_IRQn,                   /*!< ADC Sequence 2                     */
    ADCSeq3_IRQn,                   /*!< ADC Sequence 3                     */
    Watchdog_IRQn,                  /*!< Watchdog                           */
    Timer0A_IRQn,                   /*!< Timer 0A                           */
    Timer0B_IRQn,                   /*!< Timer 0B                           */
    Timer1A_IRQn,                   /*!< Timer 1A                           */
    Timer1B_IRQn,                   /*!< Timer 1B                           */
    Timer2A_IRQn,                   /*!< Timer 2A                           */
    Timer2B_IRQn,                   /*!< Timer 2B                           */
    Comp0_IRQn,                     /*!< Comp 0                             */
    Comp1_IRQn,                     /*!< Comp 1                             */
    Comp2_IRQn,                     /*!< Comp 2                             */
    SysCtrl_IRQn,                   /*!< System Control                     */
    FlashCtrl_IRQn,                 /*!< Flash Control                      */
    GPIOPortF_IRQn,                 /*!< GPIO Port F                        */
    GPIOPortG_IRQn,                 /*!< GPIO Port G                        */
    GPIOPortH_IRQn,                 /*!< GPIO Port H                        */
    USART2_IRQn,                    /*!< UART2 Rx and Tx                    */
    SSI1_IRQn,                      /*!< SSI1 Rx and Tx                     */
    Timer3A_IRQn,                   /*!< Timer 3 subtimer A                 */
    Timer3B_IRQn,                   /*!< Timer 3 subtimer B                 */
    I2C1_IRQn,                      /*!< I2C1 Master and Slave              */
    QEI1_IRQn,                      /*!< Quadrature Encoder 1               */
    CAN0_IRQn,                      /*!< CAN0                               */
    CAN1_IRQn,                      /*!< CAN1                               */
    CAN2_IRQn,                      /*!< CAN2                               */
    Ethernet_IRQn,                  /*!< Ethernet                           */
    Hibernate_IRQn,                 /*!< Hibernate                          */
    USB0_IRQn,                      /*!< USB0                               */
    PWMGen3_IRQn,                   /*!< PWM Generator 3                    */
    uDMAST_IRQn,                    /*!< uDMA Software Transfer             */
    uDMAError_IRQn,                 /*!< uDMA Error                         */
    ADC1Seq0_IRQn,                  /*!< ADC1 Sequence 0                    */
    ADC1Seq1_IRQn,                  /*!< ADC1 Sequence 1                    */
    ADC1Seq2_IRQn,                  /*!< ADC1 Sequence 2                    */
    ADC1Seq3_IRQn,                  /*!< ADC1 Sequence 3                    */
    I2S0_IRQn,                      /*!< I2S0                               */
    EBI0_IRQn,                      /*!< External Bus Interface 0           */
    GPIOPortJ_IRQn,                 /*!< GPIO Port J                        */
    GPIOPortK_IRQn,                 /*!< GPIO Port K                        */
    GPIOPortL_IRQn,                 /*!< GPIO Port L                        */
    SSI2_IRQn,                      /*!< SSI2 Rx and Tx                     */
    SSI3_IRQn,                      /*!< SSI3 Rx and Tx                     */
    UART3_IRQn,                     /*!< UART3 Rx and Tx                    */
    UART4_IRQn,                     /*!< UART4 Rx and Tx                    */
    UART5_IRQn,                     /*!< UART5 Rx and Tx                    */
    UART6_IRQn,                     /*!< UART6 Rx and Tx                    */
    UART7_IRQn,                     /*!< UART7 Rx and Tx                    */
    Reserved6_IRQn,
    Reserved7_IRQn,
    Reserved8_IRQn,
    Reserved9_IRQn,
    I2C2_IRQn,                      /*!< I2C2 Master and Slave              */
    I2C3_IRQn,                      /*!< I2C3 Master and Slave              */
    Timer4A_IRQn,                   /*!< Timer 4 subtimer A                 */
    Timer4B_IRQn,                   /*!< Timer 4 subtimer B                 */
    Reserved10_IRQn,
    Reserved11_IRQn,
    Reserved12_IRQn,
    Reserved13_IRQn,
    Reserved14_IRQn,
    Reserved15_IRQn,
    Reserved16_IRQn,
    Reserved17_IRQn,
    Reserved18_IRQn,
    Reserved19_IRQn,
    Reserved20_IRQn,
    Reserved21_IRQn,
    Reserved22_IRQn,
    Reserved23_IRQn,
    Reserved24_IRQn,
    Reserved25_IRQn,
    Reserved26_IRQn,
    Reserved27_IRQn,
    Reserved28_IRQn,
    Reserved29_IRQn,
    Timer5A_IRQn,                   /*!< Timer 5 subtimer A                 */
    Timer5B_IRQn,                   /*!< Timer 5 subtimer B                 */
    WideTimer0A_IRQn,               /*!< Wide Timer 0 subtimer A            */
    WideTimer0B_IRQn,               /*!< Wide Timer 0 subtimer B            */
    WideTimer1A_IRQn,               /*!< Wide Timer 1 subtimer A            */
    WideTimer1B_IRQn,               /*!< Wide Timer 1 subtimer B            */
    WideTimer2A_IRQn,               /*!< Wide Timer 2 subtimer A            */
    WideTimer2B_IRQn,               /*!< Wide Timer 2 subtimer B            */
    WideTimer3A_IRQn,               /*!< Wide Timer 3 subtimer A            */
    WideTimer3B_IRQn,               /*!< Wide Timer 3 subtimer B            */
    WideTimer4A_IRQn,               /*!< Wide Timer 4 subtimer A            */
    WideTimer4B_IRQn,               /*!< Wide Timer 4 subtimer B            */
    WideTimer5A_IRQn,               /*!< Wide Timer 5 subtimer A            */
    WideTimer5B_IRQn,               /*!< Wide Timer 5 subtimer B            */
    FPU_IRQn,                       /*!< FPU                                */
    PECI0_IRQn,                     /*!< PECI 0                             */
    LPC0_IRQn,                      /*!< LPC 0                              */
    I2C4_IRQn,                      /*!< I2C4 Master and Slave              */
    I2C5_IRQn,                      /*!< I2C5 Master and Slave              */
    GPIOPortM_IRQn,                 /*!< GPIO Port M                        */
    GPIOPortN_IRQn,                 /*!< GPIO Port N                        */
    QEI2_IRQn,                      /*!< Quadrature Encoder 2               */
    Fan0_IRQn,                      /*!< Fan 0                              */
    Reserved30_IRQn,
    GPIOPortP0_IRQn,                /*!< GPIO Port P (Summary or P0)        */
    GPIOPortP1_IRQn,                /*!< GPIO Port P1                       */
    GPIOPortP2_IRQn,                /*!< GPIO Port P2                       */
    GPIOPortP3_IRQn,                /*!< GPIO Port P3                       */
    GPIOPortP4_IRQn,                /*!< GPIO Port P4                       */
    GPIOPortP5_IRQn,                /*!< GPIO Port P5                       */
    GPIOPortP6_IRQn,                /*!< GPIO Port P6                       */
    GPIOPortP7_IRQn,                /*!< GPIO Port P7                       */
    GPIOPortQ0_IRQn,                /*!< GPIO Port Q (Summary or Q0)        */
    GPIOPortQ1_IRQn,                /*!< GPIO Port Q1                       */
    GPIOPortQ2_IRQn,                /*!< GPIO Port Q2                       */
    GPIOPortQ3_IRQn,                /*!< GPIO Port Q3                       */
    GPIOPortQ4_IRQn,                /*!< GPIO Port Q4                       */
    GPIOPortQ5_IRQn,                /*!< GPIO Port Q5                       */
    GPIOPortQ6_IRQn,                /*!< GPIO Port Q6                       */
    GPIOPortQ7_IRQn,                /*!< GPIO Port Q7                       */
    GPIOPortR_IRQn,                 /*!< GPIO Port R                        */
    GPIOPortS_IRQn,                 /*!< GPIO Port S                        */
    PWM1Gen0_IRQn,                  /*!< PWM 1 Generator 0                  */
    PWM1Gen1_IRQn,                  /*!< PWM 1 Generator 1                  */
    PWM1Gen2_IRQn,                  /*!< PWM 1 Generator 2                  */
    PWM1Gen3_IRQn,                  /*!< PWM 1 Generator 3                  */
    PWM1Fault_IRQn                  /*!< PWM 1 Fault                        */

} IRQn_Type;


/*
 * ===========================================================================
 * ---------- Interrupt Handler Prototypes -----------------------------------
 * ===========================================================================
 */
void NMI_Handler(void);
void HardFault_Handler(void);
void MemManage_Handler(void);
void BusFault_Handler(void);
void UsageFault_Handler(void);
void HardFault_Handler(void);

void SVC_Handler(void);
void DebugMon_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);

void GPIOPortA_IRQHandler(void);
void GPIOPortB_IRQHandler(void);
void GPIOPortC_IRQHandler(void);
void GPIOPortD_IRQHandler(void);
void GPIOPortE_IRQHandler(void);
void UART0_IRQHandler(void);
void UART1_IRQHandler(void);
void SSI0_IRQHandler(void);
void I2C0_IRQHandler(void);
void PWMFault_IRQHandler(void);
void PWMGen0_IRQHandler(void);
void PWMGen1_IRQHandler(void);
void PWMGen2_IRQHandler(void);
void QEI0_IRQHandler(void);
void ADCSeq0_IRQHandler(void);
void ADCSeq1_IRQHandler(void);
void ADCSeq2_IRQHandler(void);
void ADCSeq3_IRQHandler(void);
void Watchdog_IRQHandler(void);
void Timer0A_IRQHandler(void);
void Timer0B_IRQHandler(void);
void Timer1A_IRQHandler(void);
void Timer1B_IRQHandler(void);
void Timer2A_IRQHandler(void);
void Timer2B_IRQHandler(void);
void Comp0_IRQHandler(void);
void Comp1_IRQHandler(void);
void Comp2_IRQHandler(void);
void SysCtrl_IRQHandler(void);
void FlashCtrl_IRQHandler(void);
void GPIOPortF_IRQHandler(void);
void GPIOPortG_IRQHandler(void);
void GPIOPortH_IRQHandler(void);
void UART2_IRQHandler(void);
void SSI1_IRQHandler(void);
void Timer3A_IRQHandler(void);
void Timer3B_IRQHandler(void);
void I2C1_IRQHandler(void);
void QEI1_IRQHandler(void);
void CAN0_IRQHandler(void);
void CAN1_IRQHandler(void);
void CAN2_IRQHandler(void);
void Hibernate_IRQHandler(void);
void USB0_IRQHandler(void);
void PWMGen3_IRQHandler(void);
void uDMAST_IRQHandler(void);
void uDMAError_IRQHandler(void);
void ADC1Seq0_IRQHandler(void);
void ADC1Seq1_IRQHandler(void);
void ADC1Seq2_IRQHandler(void);
void ADC1Seq3_IRQHandler(void);
void I2S0_IRQHandler(void);
void EBI0_IRQHandler(void);
void GPIOPortJ_IRQHandler(void);
void GPIOPortK_IRQHandler(void);
void GPIOPortL_IRQHandler(void);
void SSI2_IRQHandler(void);
void SSI3_IRQHandler(void);
void UART3_IRQHandler(void);
void UART4_IRQHandler(void);
void UART5_IRQHandler(void);
void UART6_IRQHandler(void);
void UART7_IRQHandler(void);
void I2C2_IRQHandler(void);
void I2C3_IRQHandler(void);
void Timer4A_IRQHandler(void);
void Timer4B_IRQHandler(void);
void Timer5A_IRQHandler(void);
void Timer5B_IRQHandler(void);
void WideTimer0A_IRQHandler(void);
void WideTimer0B_IRQHandler(void);
void WideTimer1A_IRQHandler(void);
void WideTimer1B_IRQHandler(void);
void WideTimer2A_IRQHandler(void);
void WideTimer2B_IRQHandler(void);
void WideTimer3A_IRQHandler(void);
void WideTimer3B_IRQHandler(void);
void WideTimer4A_IRQHandler(void);
void WideTimer4B_IRQHandler(void);
void WideTimer5A_IRQHandler(void);
void WideTimer5B_IRQHandler(void);
void FPU_IRQHandler(void);
void PECI0_IRQHandler(void);
void LPC0_IRQHandler(void);
void I2C4_IRQHandler(void);
void I2C5_IRQHandler(void);
void GPIOPortM_IRQHandler(void);
void GPIOPortN_IRQHandler(void);
void QEI2_IRQHandler(void);
void Fan0_IRQHandler(void);
void GPIOPortP0_IRQHandler(void);
void GPIOPortP1_IRQHandler(void);
void GPIOPortP2_IRQHandler(void);
void GPIOPortP3_IRQHandler(void);
void GPIOPortP4_IRQHandler(void);
void GPIOPortP5_IRQHandler(void);
void GPIOPortP6_IRQHandler(void);
void GPIOPortP7_IRQHandler(void);
void GPIOPortQ0_IRQHandler(void);
void GPIOPortQ1_IRQHandler(void);
void GPIOPortQ2_IRQHandler(void);
void GPIOPortQ3_IRQHandler(void);
void GPIOPortQ4_IRQHandler(void);
void GPIOPortQ5_IRQHandler(void);
void GPIOPortQ6_IRQHandler(void);
void GPIOPortQ7_IRQHandler(void);
void GPIOPortR_IRQHandler(void);
void GPIOPortS_IRQHandler(void);
void PWM1Gen0_IRQHandler(void);
void PWM1Gen1_IRQHandler(void);
void PWM1Gen2_IRQHandler(void);
void PWM1Gen3_IRQHandler(void);
void PWM1Fault_IRQHandler(void);


/*
 * ===========================================================================
 * ----------- Processor and Core Peripheral Section -------------------------
 * ===========================================================================
 */

/* Configuration of the Cortex-M3 Processor and Core Peripherals            */
#define __MPU_PRESENT           1   /*!< MPU present or not                 */
#define __NVIC_PRIO_BITS        3   /*!< Number of Bits used for Prio Levels*/
#define __Vendor_SysTickConfig  0   /*!< 1 if different SysTick config used */
#define __FPU_PRESENT           1   /*!< FPU present or not                 */
#define TARGET_IS_BLIZZARD_RA1  1   /*!< Class of device (for TI library)   */


#include "core_cm4.h"          /* Cortex-M4 processor and core periphs      */

/*extern uint32_t SystemFrequency;*/    /*!< System Clock Frequency (Core Clock) */

/**
 * @brief  Setup the initial configuration of the microcontroller
 * @param  none
 * @return none
 *
 * Initialize the system clocking according to the user configuration.
 */
extern void SystemInit (void);

/**
 * Assertion handler
 *
 * @brief  A function to handle an assertion.
 *         This function should be defined at the application level
 *         and should never return to the caller.
 */
extern void assert_failed (char const *file, int line);


/****************************************************************************/
/*                Device Specific Peripheral registers structures           */
/****************************************************************************/

/*----------       System Controller (SYSCTL)                     ----------*/
// <g> System Controller (SYSCTL)
typedef struct
{
    __I  uint32_t DID0;             // Device identification register 0
    __I  uint32_t DID1;             // Device identification register 1
    __I  uint32_t DC0;              // Device capabilities register 0
         uint8_t  RESERVED1[4];
    __I  uint32_t DC1;              // Device capabilities register 1
    __I  uint32_t DC2;              // Device capabilities register 2
    __I  uint32_t DC3;              // Device capabilities register 3
    __I  uint32_t DC4;              // Device capabilities register 4
    __I  uint32_t DC5;              // Device capabilities register 5
    __I  uint32_t DC6;              // Device capabilities register 6
    __I  uint32_t DC7;              // Device capabilities register 7
         uint8_t  RESERVED2[4];
    __IO uint32_t PBORCTL;          // POR/BOR reset control register
    __IO uint32_t LDOPCTL;          // LDO power control register
         uint8_t  RESERVED3[8];
    __IO uint32_t SRCR0;            // Software reset control reg 0
    __IO uint32_t SRCR1;            // Software reset control reg 1
    __IO uint32_t SRCR2;            // Software reset control reg 2
         uint8_t  RESERVED4[4];
    __I  uint32_t RIS;              // Raw interrupt status register
    __IO uint32_t IMC;              // Interrupt mask/control register
    __IO uint32_t MISC;             // Interrupt status register
    __IO uint32_t RESC;             // Reset cause register
    __IO uint32_t RCC;              // Run-mode clock config register
    __I  uint32_t PLLCFG;           // PLL configuration register
         uint8_t  RESERVED5[4];
    __IO uint32_t GPIOHSCTL;        // GPIO High Speed Control
    __IO uint32_t RCC2;             // Run-mode clock config register 2
         uint8_t  RESERVED6[8];
    __IO uint32_t MOSCCTL;          // Main Oscillator Control
         uint8_t  RESERVED7[128];
    __IO uint32_t RCGC0;            // Run-mode clock gating register 0
    __IO uint32_t RCGC1;            // Run-mode clock gating register 1
    __IO uint32_t RCGC2;            // Run-mode clock gating register 2
         uint8_t  RESERVED8[4];
    __IO uint32_t SCGC0;            // Sleep-mode clock gating reg 0
    __IO uint32_t SCGC1;            // Sleep-mode clock gating reg 1
    __IO uint32_t SCGC2;            // Sleep-mode clock gating reg 2
         uint8_t  RESERVED9[4];
    __IO uint32_t DCGC0;            // Deep Sleep-mode clock gate reg 0
    __IO uint32_t DCGC1;            // Deep Sleep-mode clock gate reg 1
    __IO uint32_t DCGC2;            // Deep Sleep-mode clock gate reg 2
         uint8_t  RESERVED10[24];
    __IO uint32_t DSLPCLKCFG;       // Deep Sleep-mode clock config reg
} SYSCTL_Type;
// </g>

/*----------       General Purpose Input/Output (GPIO)           -----------*/
// <g> General Purpose Input/Output (GPIO)
typedef struct
{
    __IO uint32_t DATA_Bits[255];   // Bit specific data registers
    __IO uint32_t DATA;             // Data register.
    __IO uint32_t DIR;              // Data direction register.
    __IO uint32_t IS;               // Interrupt sense register.
    __IO uint32_t IBE;              // Interrupt both edges register.
    __IO uint32_t IEV;              // Interrupt event register.
    __IO uint32_t IM;               // Interrupt mask register.
    __I  uint32_t RIS;              // Raw interrupt status register.
    __I  uint32_t MIS;              // Masked interrupt status reg.
    __O  uint32_t ICR;              // Interrupt clear register.
    __IO uint32_t AFSEL;            // Mode control select register.
         uint8_t  RESERVED1[220];
    __IO uint32_t DR2R;             // 2ma drive select register.
    __IO uint32_t DR4R;             // 4ma drive select register.
    __IO uint32_t DR8R;             // 8ma drive select register.
    __IO uint32_t ODR;              // Open drain select register.
    __IO uint32_t PUR;              // Pull up select register.
    __IO uint32_t PDR;              // Pull down select register.
    __IO uint32_t SLR;              // Slew rate control enable reg.
    __IO uint32_t DEN;              // Digital input enable register.
    __IO uint32_t LOCK;             // Lock register.
    __O  uint32_t CR;               // Commit register.
    __IO uint32_t AMSEL;            // Analog Mode Select
    __IO uint32_t PCTL;             // Port Control
    __IO uint32_t ADCCTL;           // ADC Control
    __IO uint32_t DMACTL;           // DMA Control
} GPIO_Type;
// </g>

/*----------       General Purpose Timer (TIMER)                 -----------*/
// <g> General Purpose Timer (TIMER)
typedef struct
{
    __IO uint32_t CFG;              // Configuration register
    __IO uint32_t TAMR;             // TimerA mode register
    __IO uint32_t TBMR;             // TimerB mode register
    __IO uint32_t CTL;              // Control register
         uint8_t  RESERVED0[8];
    __IO uint32_t IMR;              // Interrupt mask register
    __I  uint32_t RIS;              // Interrupt status register
    __I  uint32_t MIS;              // Masked interrupt status reg.
    __O  uint32_t ICR;              // Interrupt clear register
    __IO uint32_t TAILR;            // TimerA interval load register
    __IO uint32_t TBILR;            // TimerB interval load register
    __IO uint32_t TAMATCHR;         // TimerA match register
    __IO uint32_t TBMATCHR;         // TimerB match register
    __IO uint32_t TAPR;             // TimerA prescale register
    __IO uint32_t TBPR;             // TimerB prescale register
    __IO uint32_t TAPMR;            // TimerA prescale match register
    __IO uint32_t TBPMR;            // TimerB prescale match register
    __I  uint32_t TAR;              // TimerA register
    __I  uint32_t TBR;              // TimerB register
} TIMER_Type;
// </g>

/*----------       Analog to Digital Converter (ADC)             -----------*/
// <g> Analog to Digital Converter (ADC)
typedef struct
{
    __IO uint32_t ACTSS;            // Active sample register
    __I  uint32_t RIS;              // Raw interrupt status register
    __IO uint32_t IM;               // Interrupt mask register
    __IO uint32_t ISC;              // Interrupt status/clear register
    __IO uint32_t OSTAT;            // Overflow status register
    __IO uint32_t EMUX;             // Event multiplexer select reg.
    __IO uint32_t USTAT;            // Underflow status register
         uint8_t  RESERVED0[4];
    __IO uint32_t SSPRI;            // Channel priority register
         uint8_t  RESERVED1[4];
    __O  uint32_t PSSI;             // Processor sample initiate reg.
         uint8_t  RESERVED2[4];
    __IO uint32_t SAC;              // Sample Averaging Control reg.
         uint8_t  RESERVED3[12];
    __IO uint32_t SSMUX0;           // Multiplexer select 0 register
    __IO uint32_t SSCTL0;           // Sample sequence control 0 reg.
    __I  uint32_t SSFIFO0;          // Result FIFO 0 register
    __I  uint32_t SSFSTAT0;         // FIFO 0 status register
         uint8_t  RESERVED4[16];
    __IO uint32_t SSMUX1;           // Multiplexer select 1 register
    __IO uint32_t SSCTL1;           // Sample sequence control 1 reg.
    __I  uint32_t SSFIFO1;          // Result FIFO 1 register
    __I  uint32_t SSFSTAT1;         // FIFO 1 status register
         uint8_t  RESERVED5[16];
    __IO uint32_t SSMUX2;           // Multiplexer select 2 register
    __IO uint32_t SSCTL2;           // Sample sequence control 2 reg.
    __I  uint32_t SSFIFO2;          // Result FIFO 2 register
    __I  uint32_t SSFSTAT2;         // FIFO 2 status register
         uint8_t  RESERVED6[16];
    __IO uint32_t SSMUX3;           // Multiplexer select 3 register
    __IO uint32_t SSCTL3;           // Sample sequence control 3 reg.
    __I  uint32_t SSFIFO3;          // Result FIFO 3 register
    __I  uint32_t SSFSTAT3;         // FIFO 3 status register
         uint8_t  RESERVED7[80];
    __IO uint32_t TMLB;             // Test mode loopback register
} ADC_Type;
// </g>

/*----------       Controller Area Network (CAN)                 -----------*/
// <g> Controller Area Network (CAN)
typedef struct
{
    __IO uint32_t CTL;              // Control register
    __IO uint32_t STS;              // Status register
    __I  uint32_t ERR;              // Error register
    __IO uint32_t BIT;              // Bit Timing register
    __I  uint32_t INT;              // Interrupt register
    __IO uint32_t TST;              // Test register
    __IO uint32_t BRPE;             // Baud Rate Prescaler register
         uint8_t  RESERVED0[4];
    __IO uint32_t IF1CRQ;           // Interface 1 Command Request reg.
    __IO uint32_t IF1CMSK;          // Interface 1 Command Mask reg.
    __IO uint32_t IF1MSK1;          // Interface 1 Mask 1 register
    __IO uint32_t IF1MSK2;          // Interface 1 Mask 2 register
    __IO uint32_t IF1ARB1;          // Interface 1 Arbitration 1 reg.
    __IO uint32_t IF1ARB2;          // Interface 1 Arbitration 2 reg.
    __IO uint32_t IF1MCTL;          // Interface 1 Message Control reg.
    __IO uint32_t IF1DA1;           // Interface 1 DataA 1 register
    __IO uint32_t IF1DA2;           // Interface 1 DataA 2 register
    __IO uint32_t IF1DB1;           // Interface 1 DataB 1 register
    __IO uint32_t IF1DB2;           // Interface 1 DataB 2 register
         uint8_t  RESERVED1[52];
    __IO uint32_t IF2CRQ;           // Interface 2 Command Request reg.
    __IO uint32_t IF2CMSK;          // Interface 2 Command Mask reg.
    __IO uint32_t IF2MSK1;          // Interface 2 Mask 1 register
    __IO uint32_t IF2MSK2;          // Interface 2 Mask 2 register
    __IO uint32_t IF2ARB1;          // Interface 2 Arbitration 1 reg.
    __IO uint32_t IF2ARB2;          // Interface 2 Arbitration 2 reg.
    __IO uint32_t IF2MCTL;          // Interface 2 Message Control reg.
    __IO uint32_t IF2DA1;           // Interface 2 DataA 1 register
    __IO uint32_t IF2DA2;           // Interface 2 DataA 2 register
    __IO uint32_t IF2DB1;           // Interface 2 DataB 1 register
    __IO uint32_t IF2DB2;           // Interface 2 DataB 2 register
         uint8_t  RESERVED2[84];
    __I  uint32_t TXRQ1;            // Transmission Request 1 register
    __I  uint32_t TXRQ2;            // Transmission Request 2 register
         uint8_t  RESERVED3[24];
    __I  uint32_t NWDA1;            // New Data 1 register
    __I  uint32_t NWDA2;            // New Data 2 register
         uint8_t  RESERVED4[24];
    __I  uint32_t MSG1INT;          // CAN Message 1 Interrupt Pending
    __I  uint32_t MSG2INT;          // CAN Message 2 Interrupt Pending
         uint8_t  RESERVED5[24];
    __I  uint32_t MSG1VAL;          // CAN Message 1 Valid
    __I  uint32_t MSG2VAL;          // CAN Message 2 Valid
} CAN_Type;
// </g>

/*----------       Analog Comparators (COMP)                     -----------*/
// <g> Analog Comparators (COMP)
typedef struct
{
    __IO uint32_t ACMIS;            // Analog Comparator Masked
                                    // Interrupt Status
    __I  uint32_t ACRIS;            // Analog Comparator Raw Interrupt Status
    __IO uint32_t ACINTEN;          // Analog Comparator Interrupt Enable
         uint8_t  RESERVED0[4];
    __IO uint32_t ACREFCTL;         // Analog Comparator Reference Voltage
                                    // Control
         uint8_t  RESERVED1[12];
    __I  uint32_t ACSTAT0;          // Comp0 status register
    __IO uint32_t ACCTL0;           // Comp0 control register
         uint8_t  RESERVED2[24];
    __I  uint32_t ACSTAT1;          // Comp1 status register
    __IO uint32_t ACCTL1;           // Comp1 control register
         uint8_t  RESERVED3[24];
    __I  uint32_t ACSTAT2;          // Comp2 status register
    __IO uint32_t ACCTL2;           // Comp2 control register
} COMP_Type;
// </g>

/*----------       Ethernet Controller (MAC)                     -----------*/
// <g> Ethernet Controller (MAC)
typedef struct
{
    __IO uint32_t RIS;              // (__I) Ethernet MAC Raw Interrupt Status
#define IACK RIS                    // (__O)Interrupt Acknowledge Register
    __IO uint32_t IM;               // Interrupt Mask Register
    __IO uint32_t RCTL;             // Receive Control Register
    __IO uint32_t TCTL;             // Transmit Control Register
    __IO uint32_t DATA;             // Data Register
    __IO uint32_t IA0;              // Individual Address Register 0
    __IO uint32_t IA1;              // Individual Address Register 1
    __IO uint32_t THR;              // Threshold Register
    __IO uint32_t MCTL;             // Management Control Register
    __IO uint32_t MDV;              // Management Divider Register
         uint8_t  RESERVED1[4];
    __IO uint32_t MTXD;             // Management Transmit Data Reg
    __IO uint32_t MRXD;             // Management Receive Data Reg
    __I  uint32_t NP;               // Number of Packets Register
    __IO uint32_t TR;               // Transmission Request Register
    __IO uint32_t TS;               // Timer Support Register
} MAC_Type;
// </g>

/*----------       Flash Memory Controller (FLASH)               -----------*/
// <g> Flash Memory Controller (FLASH)
typedef struct
{
    __IO uint32_t FMA;              // Memory address register
    __IO uint32_t FMD;              // Memory data register
    __IO uint32_t FMC;              // Memory control register
    __I  uint32_t FCRIS;            // Raw interrupt status register
    __IO uint32_t FCIM;             // Interrupt mask register
    __IO uint32_t FCMISC;           // Interrupt status register
         uint8_t  RESERVED1[4312];
    __IO uint32_t RMCTL;            // ROM Control
    __I  uint32_t RMVER;            // ROM Version Register
         uint8_t  RESERVED2[56];
    __IO uint32_t FMPRE;            // FLASH read protect register
    __IO uint32_t FMPPE;            // FLASH program protect register
         uint8_t  RESERVED3[8];
    __IO uint32_t USECRL;           // uSec reload register
         uint8_t  RESERVED4[140];
    __IO uint32_t USERDBG;          // User Debug
         uint8_t  RESERVED5[12];
    __IO uint32_t USERREG0;         // User Register 0
    __IO uint32_t USERREG1;         // User Register 1
    __IO uint32_t USERREG2;         // User Register 2
    __IO uint32_t USERREG3;         // User Register 3
         uint8_t  RESERVED6[16];
    __IO uint32_t FMPRE0;           // FLASH read protect register 0
    __IO uint32_t FMPRE1;           // FLASH read protect register 1
    __IO uint32_t FMPRE2;           // FLASH read protect register 2
    __IO uint32_t FMPRE3;           // FLASH read protect register 3
         uint8_t  RESERVED7[496];
    __IO uint32_t FMPPE0;           // FLASH program protect register 0
    __IO uint32_t FMPPE1;           // FLASH program protect register 1
    __IO uint32_t FMPPE2;           // FLASH program protect register 2
    __IO uint32_t FMPPE3;           // FLASH program protect register 3
} FLASH_Type;
// </g>

/*----------       Hibernation Module (HIB)                      -----------*/
// <g> Hibernation Module (HIB)
typedef struct
{
    __I  uint32_t HIB_RTCC;         // Hibernate RTC counter
    __IO uint32_t HIB_RTCM0;        // Hibernate RTC match 0
    __IO uint32_t HIB_RTCM1;        // Hibernate RTC match 1
    __IO uint32_t HIB_RTCLD;        // Hibernate RTC load
    __IO uint32_t HIB_CTL;          // Hibernate RTC control
    __IO uint32_t HIB_IM;           // Hibernate interrupt mask
    __I  uint32_t HIB_RIS;          // Hibernate raw interrupt status
    __I  uint32_t HIB_MIS;          // Hibernate masked interrupt stat
    __IO uint32_t HIB_IC;           // Hibernate interrupt clear
    __IO uint32_t HIB_RTCT;         // Hibernate RTC trim
         uint8_t  RESERVED1[8];
    __IO uint32_t HIB_DATA[64];     // Hibernate data area
} HIB_Type;
// </g>

/*-------- Inter-Integrated Circuit Controller Master (I2C_MASTER) ---------*/
// <g> Inter-Integrated Circuit Controller Master (I2C_MASTER)
typedef struct
{
    __IO uint32_t MSA;              // I2C Master Slave Address
    __IO uint32_t MCS;              // I2C Master Control/Status
    __IO uint32_t MDR;              // I2C Master Data
    __IO uint32_t MTPR;             // I2C Master Timer Period
    __IO uint32_t MIMR;             // I2C Master Interrupt Mask
    __I  uint32_t MRIS;             // I2C Master Raw Interrupt Status
    __I  uint32_t MMIS;             // I2C Master Masked Interrupt Status
    __O  uint32_t MICR;             // I2C Master Interrupt Clear
    __IO uint32_t MCR;              // I2C Master Configuration
} I2C_MASTER_Type;
// </g>

/*--------- Inter-Integrated Circuit Controller Slave (I2C_SLAVE) ----------*/
// <g> Inter-Integrated Circuit Controller Slave (I2C_SLAVE)
typedef struct
{
    __IO uint32_t SOAR;             // I2C Slave Own Address
    __I  uint32_t SCSR;             // I2C Slave Control/Status
    __IO uint32_t SDR;              // I2C Slave Data
    __IO uint32_t SIMR;             // I2C Slave Interrupt Mask
    __I  uint32_t SRIS;             // I2C Slave Raw Interrupt Status
    __I  uint32_t SMIS;             // I2C Slave Masked Interrupt Status
    __O  uint32_t SICR;             // I2C Slave Interrupt Clear
} I2C_SLAVE_Type;
// </g>

/*----------       Pulse Width Modulation (PWM)                   ----------*/
// <g> Pulse Width Modulation (PWM)
typedef struct
{
    __IO uint32_t CTL;              // PWM Master Control register
    __IO uint32_t SYNC;             // PWM Time Base Sync register
    __IO uint32_t ENABLE;           // PWM Output Enable register
    __IO uint32_t INVERT;           // PWM Output Inversion register
    __IO uint32_t FAULT;            // PWM Output Fault register
    __IO uint32_t INTEN;            // PWM Interrupt Enable register
    __I  uint32_t RIS;              // PWM Interrupt Raw Status reg.
    __IO uint32_t ISC;              // PWM Interrupt Status register
    __I  uint32_t STATUS;           // PWM Status register
    __IO uint32_t FAULTVAL;         // PWM Fault Condition Value
         uint8_t  RESERVED0[24];
    __IO uint32_t GEN0_CTL;            // PWM0 Control
    __IO uint32_t GEN0_INTEN;          // PWM0 Interrupt and Trigger Enable
    __I  uint32_t GEN0_RIS;            // PWM0 Raw Interrupt Status
    __IO uint32_t GEN0_ISC;            // PWM0 Interrupt Status and Clear
    __IO uint32_t GEN0_LOAD;           // PWM0 Load
    __I  uint32_t GEN0_COUNT;          // PWM0 Counter
    __IO uint32_t GEN0_CMPA;           // PWM0 Compare A
    __IO uint32_t GEN0_CMPB;           // PWM0 Compare B
    __IO uint32_t GEN0_GENA;           // PWM0 Generator A Control
    __IO uint32_t GEN0_GENB;           // PWM0 Generator B Control
    __IO uint32_t GEN0_DBCTL;          // PWM0 Dead-Band Control
    __IO uint32_t GEN0_DBRISE;         // PWM0 Dead-Band Rising-Edge Delay
    __IO uint32_t GEN0_DBFALL;         // PWM0 Dead-Band Falling-Edge-Delay
    __IO uint32_t GEN0_FLTSRC0;        // PWM0 Fault Source 0
         uint8_t  RESERVED1[4];
    __IO uint32_t GEN0_MINFLTPER;      // PWM0 Minimum Fault Period
    __IO uint32_t GEN1_CTL;            // PWM1 Control
    __IO uint32_t GEN1_INTEN;          // PWM1 Interrupt Enable
    __I  uint32_t GEN1_RIS;            // PWM1 Raw Interrupt Status
    __IO uint32_t GEN1_ISC;            // PWM1 Interrupt Status and Clear
    __IO uint32_t GEN1_LOAD;           // PWM1 Load
    __I  uint32_t GEN1_COUNT;          // PWM1 Counter
    __IO uint32_t GEN1_CMPA;           // PWM1 Compare A
    __IO uint32_t GEN1_CMPB;           // PWM1 Compare B
    __IO uint32_t GEN1_GENA;           // PWM1 Generator A Control
    __IO uint32_t GEN1_GENB;           // PWM1 Generator B Control
    __IO uint32_t GEN1_DBCTL;          // PWM1 Dead-Band Control
    __IO uint32_t GEN1_DBRISE;         // PWM1 Dead-Band Rising-Edge Delay
    __IO uint32_t GEN1_DBFALL;         // PWM1 Dead-Band Falling-Edge-Delay
    __IO uint32_t GEN1_FLTSRC0;        // PWM1 Fault Source 0
         uint8_t  RESERVED2[4];
    __IO uint32_t GEN1_MINFLTPER;      // PWM1 Minimum Fault Period
    __IO uint32_t GEN2_CTL;            // PWM2 Control
    __IO uint32_t GEN2_INTEN;          // PWM2 InterruptEnable
    __I  uint32_t GEN2_RIS;            // PWM2 Raw Interrupt Status
    __IO uint32_t GEN2_ISC;            // PWM2 Interrupt Status and Clear
    __IO uint32_t GEN2_LOAD;           // PWM2 Load
    __I  uint32_t GEN2_COUNT;          // PWM2 Counter
    __IO uint32_t GEN2_CMPA;           // PWM2 Compare A
    __IO uint32_t GEN2_CMPB;           // PWM2 Compare B
    __IO uint32_t GEN2_GENA;           // PWM2 Generator A Control
    __IO uint32_t GEN2_GENB;           // PWM2 Generator B Control
    __IO uint32_t GEN2_DBCTL;          // PWM2 Dead-Band Control
    __IO uint32_t GEN2_DBRISE;         // PWM2 Dead-Band Rising-Edge Delay
    __IO uint32_t GEN2_DBFALL;         // PWM2 Dead-Band Falling-Edge-Delay
    __IO uint32_t GEN2_FLTSRC0;        // PWM2 Fault Source 0
         uint8_t  RESERVED3[4];
    __IO uint32_t GEN2_MINFLTPER;      // PWM2 Minimum Fault Period
    __IO uint32_t GEN3_CTL;            // PWM3 Control
    __IO uint32_t GEN3_INTEN;          // PWM3 Interrupt and Trigger Enable
    __I  uint32_t GEN3_RIS;            // PWM3 Raw Interrupt Status
    __IO uint32_t GEN3_ISC;            // PWM3 Interrupt Status and Clear
    __IO uint32_t GEN3_LOAD;           // PWM3 Load
    __I  uint32_t GEN3_COUNT;          // PWM3 Counter
    __IO uint32_t GEN3_CMPA;           // PWM3 Compare A
    __IO uint32_t GEN3_CMPB;           // PWM3 Compare B
    __IO uint32_t GEN3_GENA;           // PWM3 Generator A Control
    __IO uint32_t GEN3_GENB;           // PWM3 Generator B Control
    __IO uint32_t GEN3_DBCTL;          // PWM3 Dead-Band Control
    __IO uint32_t GEN3_DBRISE;         // PWM3 Dead-Band Rising-Edge Delay
    __IO uint32_t GEN3_DBFALL;         // PWM3 Dead-Band Falling-Edge-Delay
    __IO uint32_t GEN3_FLTSRC0;        // PWM3 Fault Source 0
         uint8_t  RESERVED4[4];
    __IO uint32_t GEN3_MINFLTPER;      // PWM3 Minimum Fault Period
         uint8_t  RESERVED5[1728];
    __IO uint32_t GEN0_FLTSEN;         // PWM0 Fault Pin Logic Sense
    __I  uint32_t GEN0_FLTSTAT0;       // PWM0 Fault Status 0
         uint8_t  RESERVED6[120];
    __IO uint32_t GEN1_FLTSEN;         // PWM1 Fault Pin Logic Sense
    __I  uint32_t GEN1_FLTSTAT0;       // PWM1 Fault Status 0
         uint8_t  RESERVED7[120];
    __IO uint32_t GEN2_FLTSEN;         // PWM2 Fault Pin Logic Sense
    __I  uint32_t GEN2_FLTSTAT0;       // PWM2 Fault Status 0
         uint8_t  RESERVED8[120];
    __IO uint32_t GEN3_FLTSEN;         // PWM3 Fault Pin Logic Sense
    __I  uint32_t GEN3_FLTSTAT0;       // PWM3 Fault Status 0
} PWM_Type;
// </g>

/*----------       Pulse Width Modulation Generator (PWMGEN)      ----------*/
// <g> Pulse Width Modulation Generator (PWMGEN)
typedef struct
{
    __IO uint32_t CTL;                 // PWM0 Control
    __IO uint32_t INTEN;               // PWM0 Interrupt and Trigger Enable
    __I  uint32_t RIS;                 // PWM0 Raw Interrupt Status
    __IO uint32_t ISC;                 // PWM0 Interrupt Status and Clear
    __IO uint32_t LOAD;                // PWM0 Load
    __I  uint32_t COUNT;               // PWM0 Counter
    __IO uint32_t CMPA;                // PWM0 Compare A
    __IO uint32_t CMPB;                // PWM0 Compare B
    __IO uint32_t GENA;                // PWM0 Generator A Control
    __IO uint32_t GENB;                // PWM0 Generator B Control
    __IO uint32_t DBCTL;               // PWM0 Dead-Band Control
    __IO uint32_t DBRISE;              // PWM0 Dead-Band Rising-Edge Delay
    __IO uint32_t DBFALL;              // PWM0 Dead-Band Falling-Edge-Delay
    __IO uint32_t FLTSRC0;             // PWM0 Fault Source 0
         uint8_t  RESERVED1[4];
    __IO uint32_t MINFLTPER;           // PWM0 Minimum Fault Period
} PWMGEN_Type;
// </g>

/*----------       Quadrature Encoded Input (QEI)                 ----------*/
// <g> Quadrature Encoded Input (QEI)
typedef struct
{
    __IO uint32_t CTL;                  // Configuration and control reg.
    __I  uint32_t STAT;                 // Status register
    __IO uint32_t POS;                  // Current position register
    __IO uint32_t MAXPOS;               // Maximum position register
    __IO uint32_t LOAD;                 // Velocity timer load register
    __I  uint32_t TIME;                 // Velocity timer register
    __I  uint32_t COUNT;                // Velocity pulse count register
    __I  uint32_t SPEED;                // Velocity speed register
    __IO uint32_t INTEN;                // Interrupt enable register
    __I  uint32_t RIS;                  // Raw interrupt status register
    __IO uint32_t ISC;                  // Interrupt status register
} QEI_Type;
// </g>

/*----------       Synchronous Serial Interface (SSI)             ----------*/
// <g> Synchronous Serial Interface (SSI)
typedef struct
{
    __IO uint32_t CR0;              // Control register 0
    __IO uint32_t CR1;              // Control register 1
    __IO uint32_t DR;               // Data register
    __I  uint32_t SR;               // Status register
    __IO uint32_t CPSR;             // Clock prescale register
    __IO uint32_t IM;               // Int mask set and clear register
    __I  uint32_t RIS;              // Raw interrupt register
    __I  uint32_t MIS;              // Masked interrupt register
    __O  uint32_t ICR;              // Interrupt clear register
    __IO uint32_t DMACTL;           // SSI DMA Control
} SSI_Type;
// </g>

/*----------       Asynchronous Serial (UART)                     ----------*/
// <g> Asynchronous Serial (UART)
typedef struct
{
    __IO uint32_t DR;               // Data Register
    __IO uint32_t RSR;              // Receive Status Register (read)
#define ECR RSR                     // Error Clear Register (write)
         uint8_t  RESERVED1[16];
    __I  uint32_t FR;               // Flag Register (read only)
         uint8_t  RESERVED2[4];
    __IO uint32_t ILPR;             // UART IrDA Low-Power Register
    __IO uint32_t IBRD;             // Integer Baud Rate Divisor Reg
    __IO uint32_t FBRD;             // Fractional Baud Rate Divisor Reg
    __IO uint32_t LCRH;             // UART Line Control
    __IO uint32_t CTL;              // Control Register
    __IO uint32_t IFLS;             // Interrupt FIFO Level Select Reg
    __IO uint32_t IM;               // Interrupt Mask Set/Clear Reg
    __I  uint32_t RIS;              // Raw Interrupt Status Register
    __I  uint32_t MIS;              // Masked Interrupt Status Register
    __O  uint32_t ICR;              // Interrupt Clear Register
    __IO uint32_t DMACTL;           // UART DMA Control
} UART_Type;
// </g>

/*----------       DMA Controller (UDMA)                          ----------*/
// <g> DMA Controller (UDMA)
typedef struct
{
    __I  uint32_t STAT;             // DMA Status
    __O  uint32_t CFG;              // DMA Configuration
    __IO uint32_t CTLBASE;          // DMA Channel Control Base Pointer
    __I  uint32_t ALTBASE;          // DMA Alternate Channel Control Base
                                    // Pointer
    __I  uint32_t WAITSTAT;         // DMA Channel Wait on Request Status
    __O  uint32_t SWREQ;            // DMA Channel Software Request
    __IO uint32_t USEBURSTSET;      // DMA Channel Useburst Set
    __O  uint32_t USEBURSTCLR;      // DMA Channel Useburst Clear
    __IO uint32_t REQMASKSET;       // DMA Channel Request Mask Set
    __O  uint32_t REQMASKCLR;       // DMA Channel Request Mask Clear
    __IO uint32_t ENASET;           // DMA Channel Enable Set
    __O  uint32_t ENACLR;           // DMA Channel Enable Clear
    __IO uint32_t ALTSET;           // DMA Channel Primary Alternate Set
    __O  uint32_t ALTCLR;           // DMA Channel Primary Alternate Clear
    __IO uint32_t PRIOSET;          // DMA Channel Priority Set
    __O  uint32_t PRIOCLR;          // DMA Channel Priority Clear
         uint8_t  RESERVED1[12];
    __IO uint32_t ERRCLR;           // DMA Bus Error Clear
} UDMA_Type;
// </g>

/*----------       DMA Channel Control Structure (UDMA_CTRL)      ----------*/
// <g> DMA Channel Control Structure (UDMA_CTRL)
typedef struct
{
    __IO uint32_t SRCENDP;          // DMA Channel Source Address End Pointer
    __IO uint32_t DSTENDP;          // DMA Channel Destination Address End
                                    // Pointer
    __IO uint32_t CHCTL;            // DMA Channel Control Word
} UDMA_CTRL_Type;
// </g>

/*----------       Universal Serial Bus Controller (USB)          ----------*/
// <g> Universal Serial Bus Controller (USB)
typedef struct
{
    __IO uint8_t  FADDR;            // USB Device Functional Address
    __IO uint8_t  POWER;            // USB Power
    __I  uint16_t TXIS;             // USB Transmit Interrupt Status
    __I  uint16_t RXIS;             // USB Receive Interrupt Status
    __IO uint16_t TXIE;             // USB Transmit Interrupt Enable
    __IO uint16_t RXIE;             // USB Receive Interrupt Enable
    __I  uint8_t  IS;               // USB General Interrupt Status
    __IO uint8_t  IE;               // USB Interrupt Enable
    __I  uint16_t FRAME;            // USB Frame Value
    __IO uint8_t  EPIDX;            // USB Endpoint Index
    __IO uint8_t  TEST;             // USB Test Mode
         uint8_t  RESERVED1[16];
    __IO uint32_t FIFO0;            // USB FIFO Endpoint 0
    __IO uint32_t FIFO1;            // USB FIFO Endpoint 1
    __IO uint32_t FIFO2;            // USB FIFO Endpoint 2
    __IO uint32_t FIFO3;            // USB FIFO Endpoint 3
         uint8_t  RESERVED2[48];
    __IO uint8_t  DEVCTL;           // USB Device Control
         uint8_t  RESERVED3[1];
    __IO uint8_t  TXFIFOSZ;         // USB Transmit Dynamic FIFO Sizing
    __IO uint8_t  RXFIFOSZ;         // USB Receive Dynamic FIFO Sizing
    __IO uint16_t TXFIFOADD;        // USB Transmit FIFO Start Address
    __IO uint16_t RXFIFOADD;        // USB Receive FIFO Start Address
         uint8_t  RESERVED4[18];
    __IO uint8_t  CONTIM;           // USB Connect Timing
    __IO uint8_t  VPLEN;            // USB OTG VBus Pulse Timing
         uint8_t  RESERVED5[1];
    __IO uint8_t  FSEOF;            // USB Full-Speed Last Transaction to End
                                    // of Frame Timing
    __IO uint8_t  LSEOF;            // USB Low-Speed Last Transaction to End of
                                    // Frame Timing
         uint8_t  RESERVED6[1];
    __IO uint8_t  TXFUNCADDR0;      // USB Transmit Functional Address
                                    // Endpoint 0
         uint8_t  RESERVED7[1];
    __IO uint8_t  TXHUBADDR0;       // USB Transmit Hub Address Endpoint 0
    __IO uint8_t  TXHUBPORT0;       // USB Transmit Hub Port Endpoint 0
         uint8_t  RESERVED8[4];
    __IO uint8_t  TXFUNCADDR1;      // USB Transmit Functional Address
                                    // Endpoint 1
         uint8_t  RESERVED9[1];
    __IO uint8_t  TXHUBADDR1;       // USB Transmit Hub Address Endpoint 1
    __IO uint8_t  TXHUBPORT1;       // USB Transmit Hub Port Endpoint 1
    __IO uint8_t  RXFUNCADDR1;      // USB Receive Functional Address
                                    // Endpoint 1
         uint8_t  RESERVED10[1];
    __IO uint8_t  RXHUBADDR1;       // USB Receive Hub Address Endpoint 1
    __IO uint8_t  RXHUBPORT1;       // USB Receive Hub Port Endpoint 1
    __IO uint8_t  TXFUNCADDR2;      // USB Transmit Functional Address
                                    // Endpoint 2
         uint8_t  RESERVED11[1];
    __IO uint8_t  TXHUBADDR2;       // USB Transmit Hub Address Endpoint 2
    __IO uint8_t  TXHUBPORT2;       // USB Transmit Hub Port Endpoint 2
    __IO uint8_t  RXFUNCADDR2;      // USB Receive Functional Address
                                    // Endpoint 2
         uint8_t  RESERVED12[1];
    __IO uint8_t  RXHUBADDR2;       // USB Receive Hub Address Endpoint 2
    __IO uint8_t  RXHUBPORT2;       // USB Receive Hub Port Endpoint 2
    __IO uint8_t  TXFUNCADDR3;      // USB Transmit Functional Address
                                    // Endpoint 3
         uint8_t  RESERVED13[1];
    __IO uint8_t  TXHUBADDR3;       // USB Transmit Hub Address Endpoint 3
    __IO uint8_t  TXHUBPORT3;       // USB Transmit Hub Port Endpoint 3
    __IO uint8_t  RXFUNCADDR3;      // USB Receive Functional Address
                                    // Endpoint 3
         uint8_t  RESERVED14[1];
    __IO uint8_t  RXHUBADDR3;       // USB Receive Hub Address Endpoint 3
    __IO uint8_t  RXHUBPORT3;       // USB Receive Hub Port Endpoint 3
         uint8_t  RESERVED15[98];
    __O  uint8_t  CSRL0;            // USB Control and Status Endpoint 0 Low
    __O  uint8_t  CSRH0;            // USB Control and Status Endpoint 0 High
         uint8_t  RESERVED16[4];
    __I  uint8_t  COUNT0;           // USB Receive Byte Count Endpoint 0
         uint8_t  RESERVED17[1];
    __IO uint8_t  TYPE0;            // USB Type Endpoint 0
    __IO uint8_t  NAKLMT;           // USB NAK Limit
         uint8_t  RESERVED18[4];
    __IO uint16_t TXMAXP1;          // USB Maximum Transmit Data Endpoint 1
    __IO uint8_t  TXCSRL1;          // USB Transmit Control and Status
                                    // Endpoint 1 Low
    __IO uint8_t  TXCSRH1;          // USB Transmit Control and Status
                                    // Endpoint 1 High
    __IO uint16_t RXMAXP1;          // USB Maximum Receive Data Endpoint 1
    __IO uint8_t  RXCSRL1;          // USB Receive Control and Status
                                    // Endpoint 1 Low
    __IO uint8_t  RXCSRH1;          // USB Receive Control and Status
                                    // Endpoint 1 High
    __I  uint16_t RXCOUNT1;         // USB Receive Byte Count Endpoint 1
    __IO uint8_t  TXTYPE1;          // USB Host Transmit Configure Type
                                    // Endpoint 1
    __IO uint8_t  TXINTERVAL1;      // USB Host Transmit Interval Endpoint 1
    __IO uint8_t  RXTYPE1;          // USB Host Configure Receive Type
                                    // Endpoint 1
    __IO uint8_t  RXINTERVAL1;      // USB Host Receive Polling Interval
                                    // Endpoint 1
         uint8_t  RESERVED19[2];
    __IO uint16_t TXMAXP2;          // USB Maximum Transmit Data Endpoint 2
    __IO uint8_t  TXCSRL2;          // USB Transmit Control and Status
                                    // Endpoint 2 Low
    __IO uint8_t  TXCSRH2;          // USB Transmit Control and Status
                                    // Endpoint 2 High
    __IO uint16_t RXMAXP2;          // USB Maximum Receive Data Endpoint 2
    __IO uint8_t  RXCSRL2;          // USB Receive Control and Status
                                    // Endpoint 2 Low
    __IO uint8_t  RXCSRH2;          // USB Receive Control and Status
                                    // Endpoint 2 High
    __I  uint16_t RXCOUNT2;         // USB Receive Byte Count Endpoint 2
    __IO uint8_t  TXTYPE2;          // USB Host Transmit Configure Type
                                    // Endpoint 2
    __IO uint8_t  TXINTERVAL2;      // USB Host Transmit Interval Endpoint 2
    __IO uint8_t  RXTYPE2;          // USB Host Configure Receive Type
                                    // Endpoint 2
    __IO uint8_t  RXINTERVAL2;      // USB Host Receive Polling Interval
                                    // Endpoint 2
         uint8_t  RESERVED20[2];
    __IO uint16_t TXMAXP3;          // USB Maximum Transmit Data Endpoint 3
    __IO uint8_t  TXCSRL3;          // USB Transmit Control and Status
                                    // Endpoint 3 Low
    __IO uint8_t  TXCSRH3;          // USB Transmit Control and Status
                                    // Endpoint 3 High
    __IO uint16_t RXMAXP3;          // USB Maximum Receive Data Endpoint 3
    __IO uint8_t  RXCSRL3;          // USB Receive Control and Status
                                    // Endpoint 3 Low
    __IO uint8_t  RXCSRH3;          // USB Receive Control and Status
                                    // Endpoint 3 High
    __I  uint16_t RXCOUNT3;         // USB Receive Byte Count Endpoint 3
    __IO uint8_t  TXTYPE3;          // USB Host Transmit Configure Type
                                    // Endpoint 3
    __IO uint8_t  TXINTERVAL3;      // USB Host Transmit Interval Endpoint 3
    __IO uint8_t  RXTYPE3;          // USB Host Configure Receive Type
                                    // Endpoint 3
    __IO uint8_t  RXINTERVAL3;      // USB Host Receive Polling Interval
                                    // Endpoint 3
         uint8_t  RESERVED21[454];
    __IO uint16_t RQPKTCOUNT1;      // USB Request Packet Count in Block
                                    // Transfer Endpoint 1
         uint8_t  RESERVED22[2];
    __IO uint16_t RQPKTCOUNT2;      // USB Request Packet Count in Block
                                    // Transfer Endpoint 2
         uint8_t  RESERVED23[2];
    __IO uint16_t RQPKTCOUNT3;      // USB Request Packet Count in Block
                                    // Transfer Endpoint 3
         uint8_t  RESERVED24[50];
    __IO uint16_t RXDPKTBUFDIS;     // USB Receive Double Packet Buffer Disable
    __IO uint16_t TXDPKTBUFDIS;     // USB Transmit Double Packet Buffer
                                    // Disable
         uint8_t  RESERVED25[188];
    __IO uint32_t EPC;              // USB External Power Control
    __I  uint32_t EPCRIS;           // USB External Power Control Raw Interrupt Status
    __IO uint32_t EPCIM;            // USB External Power Control Interrupt
                                    // Mask
    __IO uint32_t EPCISC;           // USB External Power Control Interrupt
                                    // Status and Clear
    __I  uint32_t DRRIS;            // USB Device Resume Raw Interrupt Status
    __IO uint32_t DRIM;             // USB Device Resume Interrupt Mask
    __O  uint32_t DRISC;            // USB Device Resume Interrupt Status and
                                    // Clear
    __IO uint32_t GPCS;             // USB General-Purpose Control and Status
} USB_Type;
// </g>

/*----------       Watchdog Timer (WDT)                           ----------*/
// <g> Watchdog Timer (WDT)
typedef struct
{
    __IO uint32_t LOAD;             // Load register
    __I  uint32_t VALUE;            // Current value register
    __IO uint32_t CTL;              // Control register
    __O  uint32_t ICR;              // Interrupt clear register
    __I  uint32_t RIS;              // Raw interrupt status register
    __I  uint32_t MIS;              // Masked interrupt status register
         uint8_t  RESERVED0[1024];
    __IO uint32_t TEST;             // Test register
         uint8_t  RESERVED1[2020];
    __IO uint32_t LOCK;             // Lock register
} WDT_Type;
// </g>

/****************************************************************************/
/*                              Memory map                                  */
/****************************************************************************/

#define FLASH_BASE          (0x00000000UL)
#define RAM_BASE            (0x20000000UL)
#define PERIPH_BASE         (0x40000000UL)

#define WATCHDOG_BASE           0x40000000  // Watchdog
#define GPIO_PORTA_BASE         0x40004000  // GPIO Port A
#define GPIO_PORTB_BASE         0x40005000  // GPIO Port B
#define GPIO_PORTC_BASE         0x40006000  // GPIO Port C
#define GPIO_PORTD_BASE         0x40007000  // GPIO Port D
#define SSI0_BASE               0x40008000  // SSI0
#define SSI1_BASE               0x40009000  // SSI1
#define UART0_BASE              0x4000C000  // UART0
#define UART1_BASE              0x4000D000  // UART1
#define UART2_BASE              0x4000E000  // UART2
#define I2C0_MASTER_BASE        0x40020000  // I2C0 Master
#define I2C0_SLAVE_BASE         0x40020800  // I2C0 Slave
#define I2C1_MASTER_BASE        0x40021000  // I2C1 Master
#define I2C1_SLAVE_BASE         0x40021800  // I2C1 Slave
#define GPIO_PORTE_BASE         0x40024000  // GPIO Port E
#define GPIO_PORTF_BASE         0x40025000  // GPIO Port F
#define GPIO_PORTG_BASE         0x40026000  // GPIO Port G
#define GPIO_PORTH_BASE         0x40027000  // GPIO Port H
#define PWM_BASE                0x40028000  // PWM
#define PWM_GEN_0_OFFSET        0x00000040  // PWM0 base
#define PWM_GEN_1_OFFSET        0x00000080  // PWM1 base
#define PWM_GEN_2_OFFSET        0x000000C0  // PWM2 base
#define PWM_GEN_3_OFFSET        0x00000100  // PWM3 base
#define QEI0_BASE               0x4002C000  // QEI0
#define QEI1_BASE               0x4002D000  // QEI1
#define TIMER0_BASE             0x40030000  // Timer0
#define TIMER1_BASE             0x40031000  // Timer1
#define TIMER2_BASE             0x40032000  // Timer2
#define TIMER3_BASE             0x40033000  // Timer3
#define ADC_BASE                0x40038000  // ADC
#define COMP_BASE               0x4003C000  // Analog comparators
#define CAN0_BASE               0x40040000  // CAN0
#define CAN1_BASE               0x40041000  // CAN1
#define CAN2_BASE               0x40042000  // CAN2
#define ETH_BASE                0x40048000  // Ethernet
#define MAC_BASE                0x40048000  // Ethernet
#define USB0_BASE               0x40050000  // USB 0 Controller
#define GPIO_PORTA_AHB_BASE     0x40058000  // GPIO Port A (high speed)
#define GPIO_PORTB_AHB_BASE     0x40059000  // GPIO Port B (high speed)
#define GPIO_PORTC_AHB_BASE     0x4005A000  // GPIO Port C (high speed)
#define GPIO_PORTD_AHB_BASE     0x4005B000  // GPIO Port D (high speed)
#define GPIO_PORTE_AHB_BASE     0x4005C000  // GPIO Port E (high speed)
#define GPIO_PORTF_AHB_BASE     0x4005D000  // GPIO Port F (high speed)
#define GPIO_PORTG_AHB_BASE     0x4005E000  // GPIO Port G (high speed)
#define GPIO_PORTH_AHB_BASE     0x4005F000  // GPIO Port H (high speed)
#define HIB_BASE                0x400FC000  // Hibernation Module
#define FLASH_CTRL_BASE         0x400FD000  // FLASH Controller
#define SYSCTL_BASE             0x400FE000  // System Control
#define UDMA_BASE               0x400FF000  // uDMA Controller

/****************************************************************************/
/*                            Peripheral declaration                        */
/****************************************************************************/

#define SYSCTL              ((SYSCTL_Type *)SYSCTL_BASE)

#define GPIOA               ((GPIO_Type *)GPIO_PORTA_BASE)
#define GPIOB               ((GPIO_Type *)GPIO_PORTB_BASE)
#define GPIOC               ((GPIO_Type *)GPIO_PORTC_BASE)
#define GPIOD               ((GPIO_Type *)GPIO_PORTD_BASE)
#define GPIOE               ((GPIO_Type *)GPIO_PORTE_BASE)
#define GPIOF               ((GPIO_Type *)GPIO_PORTF_BASE)
#define GPIOG               ((GPIO_Type *)GPIO_PORTG_BASE)
#define GPIOA_AHB           ((GPIO_Type *)GPIO_PORTA_AHB_BASE)
#define GPIOB_AHB           ((GPIO_Type *)GPIO_PORTB_AHB_BASE)
#define GPIOC_AHB           ((GPIO_Type *)GPIO_PORTC_AHB_BASE)
#define GPIOD_AHB           ((GPIO_Type *)GPIO_PORTD_AHB_BASE)
#define GPIOE_AHB           ((GPIO_Type *)GPIO_PORTE_AHB_BASE)
#define GPIOF_AHB           ((GPIO_Type *)GPIO_PORTF_AHB_BASE)
#define GPIOG_AHB           ((GPIO_Type *)GPIO_PORTG_AHB_BASE)

#define TIMER0              ((TIMER_Type *)TIMER0_BASE)
#define TIMER1              ((TIMER_Type *)TIMER1_BASE)
#define TIMER2              ((TIMER_Type *)TIMER2_BASE)
#define TIMER3              ((TIMER_Type *)TIMER3_BASE)

#define ADC                 ((ADC_Type *)ADC_BASE)

#define COMP                ((COMP_Type *)COMP_BASE)

#define CAN0                ((CAN_Type *)CAN0_BASE)
#define CAN1                ((CAN_Type *)CAN1_BASE)
#define CAN2                ((CAN_Type *)CAN2_BASE)

#define ETH                 ((MAC_Type *)ETH_BASE)

#define FLASH_CTRL          ((FLASH_Type *)FLASH_CTRL_BASE)

#define HIB                 ((HIB_Type *)HIB_BASE)

#define I2C0_MASTER         ((I2C_MASTER_Type *)I2C0_MASTER_BASE)
#define I2C0_SLAVE          ((I2C_SLAVE_Type *)I2C0_SLAVE_BASE)
#define I2C1_MASTER         ((I2C_MASTER_Type *)I2C1_MASTER_BASE)
#define I2C1_SLAVE          ((I2C_SLAVE_Type *)I2C1_SLAVE_BASE)

#define PWM                 ((PWM_Type *)PWM_BASE)
#define PWMGEN0             ((PWMGEN_Type *)(PWM_BASE + PWM_GEN_0_OFFSET))
#define PWMGEN1             ((PWMGEN_Type *)(PWM_BASE + PWM_GEN_1_OFFSET))
#define PWMGEN2             ((PWMGEN_Type *)(PWM_BASE + PWM_GEN_2_OFFSET))
#define PWMGEN3             ((PWMGEN_Type *)(PWM_BASE + PWM_GEN_3_OFFSET))

#define QEI0                ((QEI_Type *)QEI0_BASE)
#define QEI1                ((QEI_Type *)QEI1_BASE)

#define SSI0                ((SSI_Type *)SSI0_BASE)
#define SSI1                ((SSI_Type *)SSI1_BASE)

#define UART0               ((UART_Type *)UART0_BASE)
#define UART1               ((UART_Type *)UART1_BASE)
#define UART2               ((UART_Type *)UART2_BASE)

#define UDMA                ((UDMA_Type *)UDMA_BASE)

#define USB0                ((USB_Type *)USB0_BASE)

#define WDT                 ((WDT_Type *)WATCHDOG_BASE)

#endif  /* __TM4C_CMSIS_H__ */